chazuk

Anyone help me trying to fit the idle air control valve back on Ive fitted the adapter given that bolts to the iscv which this end goes to the top of the greedy inlet , but where do the 2 smaller hoses go ?, and the one larger one that goes somewhere over the turbo side labled as IN?

1)mwilkinson 2)*Shane* 3)lonbhold75 - raw/no holes please (paid) 4)TRD-Rob 5)p3te - unpolished/no holes (payment sent) 6)chazuk (payment sent paypal)

Not sure loads of posts on sf and there was a group buy on there the spinto web site is shutdown and says on sf in a post that no more will be made for now until 2013, here is one of the threads they orginally started with clear plastic then did clear glass so the hunt contuines:( http://www.supraforums.com/forum/showthread.php?621223-spinto-glass-headlights

Dam it I've been after a set of these for ages , that spinto company does not make them any more :-(

I went with 15ft it worked out just about right

Easter came a day early thanks mate for all those bars of Chocolate !

You have a pm hmm chocolate

Ah okay well its still his as he asked first if he wants it

I think Baldy was a yes please to Chocolate not the auto box Simon if I got it wrong let me know

removed from a gz tt auto box and torque convertor only removed due to 6 speed conversion only had bpu on it for less than 3 months pickup only from Chichester price is £ 1 large bar of cadburys chocolate will do:)

Nice work bet you cant wait to have it remapped , quick question the large blue hose coming from the top of the inlet and then goes down the side of it where does that run to ?

Cool pm'd

After the main fuse box lid

Mate that is mental ! cant wait to see it all finished :-)

I should have mine mate you can have hopefully I didnt bin it , you dont want a free tt auto box aswell do you?

LOL I think I will be following suit saves the hassle trying to plumb them in:) in the bin it goes. Cheers mate yes defiantly white is the new in for sure .

Lol yes mate I can I had the same headache , pm your email address and I will email it over

Looks ace mate and as others have said vid cant wait just know its going to be good :-)

Nice mate yea should spool well , just had a look through your thread nice work ! I got a bit lost with where things went after fitting a aftermarket inelt bit of a nightmare it seems nearly there though I have not done those to pipes yet but the greddy manual shows it as below If you need a copy of the manual I have it on pdf just let me know http://img696.imageshack.us/img696/9463/unledia.jpg

Cheers mate what turbo you going with ?

Small update well after some time I have finally got it out of the garage just a mess left behind I think before it goes back in time to lay a latex floor down as its a bit worse for wear the old concrete one:) http://img132.imageshack.us/img132/4467/dsc02747x.jpg I will change the silcone to black but blue was supplied so blue got fitted , just waiting on a boostlogic 3bolt to 4 vband exhaust adapter ,fpr and q45 tps adapter and 2 bits of silcone to finish the fmic a breather catch tank and lines and it should start http://img851.imageshack.us/img851/456/dsc02732p.jpg Driftworks oil cooler and stock uk spec diff oil cooler http://img862.imageshack.us/img862/1706/dsc02734z.jpg Driftworks oil block and hks filiter also fitted heavy duty magentic sump plug http://img857.imageshack.us/img857/1905/img00043201104111013.jpg Bosch 44 pump fitted picture not finished took while in progress old pump a walbro http://img818.imageshack.us/img818/4237/img00012201102071531.jpg Fused distriubution block 200amp wiring is now finished now apart from I might need to make the headlight connectors a bit longer at the front but I think they might reach, used a 4 gauge heavy shielded cable to run battery to the boot via the inside of the car http://img691.imageshack.us/img691/1798/dsc02737yt.jpg Cicuirt breaker 200amp http://img64.imageshack.us/img64/2136/dsc02738j.jpg Just need a small sealed battery now that will fit in the standard sub hole http://img856.imageshack.us/img856/1041/dsc02740t.jpg Pioneer sat nav /hands free double din will help to finish off the interior http://img856.imageshack.us/img856/153/dsc02748h.jpg Apr rad pannel bit of engine bay bling http://img508.imageshack.us/img508/5958/dsc02749l.jpg

You could but the stock rear catches will be doing there job I reckon 2 aero catches on the front asual and 1 of these in the centre that bolts to your strut brace thats my plan anyway they come with a black lock aswell so hardly notice it http://img151.imageshack.us/img151/3549/nrghoodpindcf.jpg

Nice one you have a pm

Need the stock pipe that runs to the air box as seen in picture here http://img189.imageshack.us/img189/9776/intakeafterairbox.jpg