merckx

It's hard aswell, not when it's cold though!

Not really, definately no gidi.

erection

Sure he didn't say Defi?

That's manslaughter, not murder. You know what I mean by premeditated murder, a businessman murdering his partner for financial reasons etc. I think the people in power are capable of making the sentence fit the crime.

Every case is different and sentencing needs to be more flexible, Judges don't have the powers they need, they just follow guidelines. The death penalty is too lenient for some, they deserve to suffer long term. For premeditated murder then life should mean life, no luxuries neither and make them suffer.

3 scored

Nic on here, he sends them from Hong Kong.

Very true, they also type it in large letters. I've refrained from doing it !

Probably only a 225 on a 7.5 " rim.

Noooooooooooooo! Need a 10" for that size tyre.

Hello, looks very nice and shiny.. Have to wash mine, don't stay clean very long.

I modified it so the sleeve for the lift-up reverse will go up into the knob as far as the dashed line. Inside the knob is a steel insert which you have to remove I removed the carbon bit which is stuck on and then removed the screw that goes into the the steel insert. Discarded the cap and then pulled out the steel insert which was very tight, I can't quite remember exactly but I used something to grip it which I held in a vice. I then cut off the end of the steel insert to the level indicaed by the dashed line. Put it all back together and then glued a plastic sleeve inside which would enable it to be screwed onto the threaded gear shaft. I also removed a few threads on the gear shaft. Don't do it unless you're confident. You could easily ruin it, mines good though and goes great with the black leather seats and my Toyota carbon steering wheel!

Another One Bites the Dust - Queen

Personally I wouldn't get a car that's been modified engine wise /gearbox etc , but it could well have been done properly. It looks very nice though!

I've got a momo combat in carbon, I expertly converted mine to a lift up reverse aswell.

http://www.find-tomtom-deals.co.uk Also on here you can get some discount codes etc http://www.hotukdeals.com/Category9-All.phtml

Tom Tom deals http://www.find-tomtom-deals.co.uk/

Do they make it obvious with big signs etc? Went to mine but it was extremely busy and I couldn't see anything. Do all the pumps have the 99 ron stuff, cannot imagine they would have a spare nozzle on each pump?

No! Generally speaking , cars that cost that little are slow and look like shit!

Says he's going to buy one, bastard!

So you didn't lose all power then?

Do you mean the engine cut out ,a speed limiter shouldn't do this.

Nic on here, he lives in Hong Kong and sends stuff over here at good prices, send him a pm.

This was posted a while back, it's supposed to be a cross section of the hub / uk brake caliper. Not sure if the small offset could give you rubbing issues on the wing. I would contact Ibrar Jabbar (Pro Alloys) or Envy on here, I'm sure they could match the price and tell you if they'll fit.