bedlam

Grazer Get some Fraecla if you can the compund you need is G3..and put some on a damp cloth.rub in and then poilsh with something like autoglym, and the lights will be nice and new look. Not sure about taking the line compeltly off.if your not sure about doing the light polishing thing.pm me a telphone number and i'll pop over and do the lights for you m8. Andy

Your thinking of Edzell Supraman,not a good place,better staying with Crail, on a NON mag day, that way if everyone decides to come up then they get it nice and quiet and lots of runs..if wanted.

End of July and early august is usually quite good up here, and Irvy stop boasting about the east Coast...it's FLAT . All the good stuff is on the west coast .

Well you can't check anything till you got another rad in there. Once in like the others have said oil and water mixing..water out the exhaust system when at normal running temp.hose's very hard went at running temp.and even then it could be the water pump thats went. Some garages just love to jump on the Head gasket thats at fault nice pay outta the job.

Yes nice selection of pics there. Andy

Hi Guys Was nice of yous to pop along and help out the TOC people. Was nice talk to both Getrag and Irvine, nice people and lovely cars,just glad there wasn't any of the usual unmarked kinda on the 77 today,dont think they would have taken kindly to Irvine in my car and Getrag playing tig on there . Look forward to meeting yous again. Andy

I guess if they get all the cars they need it will be at the quay, as i believe they are going on to a gokart thing later in the day, you'd be better asking on TOC Andy

Hi All Just wondering if any of the local Supra owners would like to pop along to this TOC meet in Glasgow on the 23rd Sunday ... http://toyotaownersclub.com/forums/index.php?showtopic=28610 They need 20 cars along to this meet and they should have a mag to do a feature on the meet, so would be nice to see some Supras in there as well. Andy

Bablefsh will prob time out on this site as the site is slow. And mcanny this site has been around for a long time now, the Soarer community used the TT bit of it which was not complete, it is now ,but i think i have only seen once that someone has managed to get into it completly. make life a little easier if you are running diff kinda cars ie Jspec Uk model, or whateverand the part numbers are all valid as i have used them often. The russian puts people off but it's not to hard to work out where you are going . Andy Rogue i stand corrected sir if you go to bablefish and copy the link into it and select russian then it will indeed translate it , but the link you posted times out and gives an error

Hi 1st hope this is the right forum, if not could one of the mods move it .. Ok I guess some of you here will have seen this site, but not sure how far you may have went with it. http://www.japancats.ru/toyota/ main page, which has 5 options on it in russian, which are as follows.. Europe Japan Near East USA Click on which one you want and you will then have a choice of all the toyta cars done for that country.so if you have a Jspec Supe then you would take the 2nd russian word..Japan. Then hit radio button next to Supra to select your model....new menu on new page...select which frame you have....new menu and new page. Russian words down left hand side. 1st one has to do with the jack and the little odds and ends 2nd is the engine and components 3rd is fuel system and components 4th is brakes suspension and variuos other parts. 5th is Frame panels and fittings 6th is Electrics relays All these menus are dropdown, and you will then have to fend for yourselfs , when you find the part you need just click on the part number and it will bring up a window with the listed part and price in rubles , but your only intrested in the part number and maybe where it fits. Now if i have just posted a load of boloox then please del this post,but it might just help someone out . Andy

The Farecla G3 can be got from most paint supply places... http://www.farecla.com/automotive.asp?id=66&stage=Automotive&set=1 Andy

Rosie Make sure you pick 1 of the 2 warm days we get up here . Andy PS Crail dates here....http://www.crailraceway.co.uk/schedule.asp

I would say yes it's a write off, but could be repaired ok. Andy

Hi try going here and getting the libary file you need.... http://www.dll-files.com/dllindex/dll-files.shtml?msa64chk And copy it back into where it is meant to be "C:\WINIT\SYSTEM32\" Andy

Had the exact same problem and it was the ISCV,which dont mean that it's your problem, but see if you can get someone to let you try theres out on your car. They where nearly 300 quid to buy. Andy

Brian Yes i'm wondering if thats because our turbos are parallel and you have the sequential setup. The only problem we have is that everything is delivered all at once, hence the car wanting to lift outta the rollers. Andy

John Dastek don't set a ramp angle, as far as i can tell there setup is a full 4 roller system, and the only problem they have with cars is the usual autobox,which i know a lot of dyno places don't like to dyno due to the fact the operator dont have as much control over the car as he would with a manual, and hence the car wanting to leave the rollers,which ours wanted to do at Dastek as well, ended up with 4 rachet belts holding it down, and still managed to get out the rollers a little. I think Gerry might have been hitting the loud pedal a little early for the supra to be changing down to 2nd,which supprise's, as every time we have had our car done there it has never done that. Andy

Grazer Well it would be a little silly of him to decry his own bussiness wouldn't it, since he is the main dealer in the UK for the Dastek unit. And he isn't saying that the emanage is crap or anything like that, he is just saying if he had the choice he would prefer to go standalone. And there are limits to the Unichip,we have larger injectors, uprated fuel pump, and the Unichip can do nothing for us, as he says we have moved beyond what the Unchip is made for. Andy

Alex There are tuners that just prefer to go a full standalone ECU,such as the AEM or Motec. I guess it's just the way he likes to do things,odd as well since he is the main dealer for dastek in the UK . Andy PS I dont have one yet well not for 2 weeks and a couple other bits for it I have to get from Japan.

Yep Tony is correct the Unichip is only for authorised dealers to play with,and will not do for anything with silly BHP,it will do all that Tony said and, delimit the car,boost . But for someone just wanting modest bhp gains then it is another option for them. Sorry he wont do the GREDDY!!! , for you supratoy,i suspected he might say no , Gerry like some others who tune cars prefers a standalone to a piggyback. Although he is doing my car in a couple months with the greddy,but i guess i just browbeat him into it . Alex .... http://www.dastek.co.za/ Andy PS where are you in Glasgow cause you could try Marc over in Wishaw, owns a place called the Garage, and do performance cars, they are in the process of moving premises. at the moment and there website is being redone, so no contact numbers if you want the number PM me and i will get hold of him for you.

supratoy Call Gerry at Dastek and have a word with him about your emanage,tell him Andy passed you on . Andy

Brian Thanks m8, yes i have now got the ones i needed, 440cc JDM JZA80 Supra TT (grey) which are the drop in ones thanks for the help . Andy

Heckler Sounds ok to me m8, gimmie a pm on price and next week isn't a problem. Andy

Hi All Sorry this might be the worng section, but i have discovered that the standard Mk4 Supra grey 440 UK spec injectors will fit the 1JZ Engine in my Soarer. So what i am hoping for is that since most of you upgrade these mad Beasts you own that someone will have a set for sale. I would be greatful for any help on this. Andy