Dieter

Hi, hello, I hope you are all well and here, I have had these Recaro CS seats for many years, I sit perfectly, the quality and the comfort , typical Recaro , excellent...., I can only absolutely recommend and fit to the still super to a black interior.

Oha...., that looks very, very good , good luck

So, here's a small update on the steering gear..., it started leaking, I flushed it, refilled it and added the additive LecWec..., now, after 5 months, only a very minimal, slight sweating....., so it was really worth it...

what else can you say....., simply perfect

yes, it's a pity you didn't find the fault, I hope it will be found quickly, I also fitted a new pump today, but from Deatschwerks.

I admire very much how correctly you carry out all the work and already deal with the rust very violently, there only helps to replace, good luck furthermore

Great, then it's already like a new car

very beautiful with the headlights and I would also darken the side indicators

Check everything again carefully, vent in any case and maybe even better, take out the pump and clean it completely, rinse the rest.

very, very good, you have done that really well and 1st cat, yes, definitely out, look how he looked with me I have also made everything in the boot as original.

hi mate, very, very well done and congratulations, so many errors found and eliminated, electrics must always be top, there must be no compromises, already got an experience from the friend, where the dashboard burned during the test drive. and please remember, do this flush with coolant and engine

Hi guys, I'm looking for an ASA AR1 alloy wheel in the dimension 9,5 j x 19 H2, ET25, code: AR1 - 9519...., would be great if someone has something......, of course I would buy 4 alloy wheels, but there the marking would be different, dimension, 8,5 J x 19 H2, ET25, code : AR1 8519

The reason why it looks so white and foamy is that I drove 15 minutes before with the filled radiator cleaner and, as I said, I had to rinse the head, As for the bubbles, I'm sure that has something to do with the air in the system, by all means bleed it..... Heater fan on hot and ventilation on highest setting

hi, hello, yes, this foam formed after I drove with a radiator cleaning fluid for 15 minutes, I can really only highly, highly recommend this...., first we drained the old coolant, then refilled it, filled up with the cleaner, drove for 15 minutes, drained and then rinsed. ...., important is absolutely, water through this hose, where you see on the picture and back on the bulkhead, above the cylinder head also pull off the hose, because so you rinse the cylinder head with through......, I send you with which product I have used and which antifreeze I have taken, ok I have also sent a picture where you can see this rear hose. https://www.amazon.de/LIQUI-MOLY-3320-Kühler-Reiniger-300/dp/B06XJ5C7H7/ref=sr_1_5_mod_primary_new?adgrpid=1190771748034673&hvadid=74423352174335&hvbmt=be&hvdev=c&hvlocphy=131185&hvnetw=o&hvqmt=e&hvtargid=kwd-74423439161699%3Aloc-72&hydadcr=25627_2712574&keywords=liqui+moly+kühlerreiniger&qid=1662962044&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sr=8-5 https://www.amazon.de/MANNOL-Antifreeze-Kühlerfrostschutz-Kühlmittel-MN4013-10/dp/B00GY69VUE/ref=sxts_rp_s_1_0?adgrpid=1203965887150493&content-id=amzn1.sym.2205093d-5f89-4add-9b03-1cd76f7ac265%3Aamzn1.sym.2205093d-5f89-4add-9b03-1cd76f7ac265&cv_ct_cx=mannol+ag13&hvadid=75247985815808&hvbmt=be&hvdev=c&hvlocphy=131185&hvnetw=o&hvqmt=e&hvtargid=kwd-75248071159788%3Aloc-72&hydadcr=26032_2714473&keywords=mannol+ag13&pd_rd_i=B00GY69VUE&pd_rd_r=9725f096-95b6-4472-82bf-a2da2ebe8b58&pd_rd_w=GMoS5&pd_rd_wg=Ystii&pf_rd_p=2205093d-5f89-4add-9b03-1cd76f7ac265&pf_rd_r=ACD5Z18MK553C1BZFBKK&psc=1&qid=1662962177&sr=1-1-1890b328-3a40-4864-baa0-a8eddba1bf6a

From my own experience I can tell you not to think about it too long, do it with the rinse as you are really doing something good for the whole system - it is actually an absolute must.

make this lady really, really beautiful again, I wish you much success and remember, there are certainly many people here in the forum who will help you

Yes, that's exactly how it is

oha, madness, madness, what a wiring, lucky that it didn't burst into flames and very good that you found such a reliable person to fix it......, better always have something like this done by a professional, otherwise it can get very nasty

No, no, that is totally crazy such a price and out of proportion....., he wants that price , but only a very stupid person will pay that price

too bad, would love to help you, but don't have anything like that around, if I see something somewhere, I will give you an info.