Ibrar Jabbar

I wouldn't recommend anything less than 9" on the rear, most common upgrades are 9.5" or 10" ideal for 275's

The PCD is fine, you will also need to take into consideration the hub centre bore (60.1mm) 30mm offset will bring the wheel further outboard and will foul the arches.

Nope, offset is to low, what have they come off?

I can supply you the Bilstein Sport shocks if required, please email [email protected].

Crimbo, The Supra that was featured back in 2001 in Fastcar and Banzai was one of my previous Supra's otherwise known as Kawasaki Blue, by some of the "old school" club members. My current Supra is a UK spec and a slightly different shade of Blue. Thanks for the nice comments. Jap Heaven, The wheels are not cheap as they are machined from Billet approx £2500 for 19's.

Jake and Bobbeh are spot on, the wheels are Pro 5 available in custom sizes, I have 9x19 and 11x19 fitted to my Supra, if you require any further information, please contact me.

Damn mate, sorry to hear this, hope your OK.

There's not much available in the BBS range anymore, to fit the Supra in the correct widths. The only wheel I can suggest is the LeMans 3 piece wheel. If you require any further information, please contact me.

1. millhouse 2. Bobbeh 3. Ray Cunliffe 4. Sherriff 5. Justin (If turbos survive TOTB. Ehm, if I can get my new Supra) 6. Barney (If my car is finished) 7. Supra66 8. The Envy lot 9. Gordon F 10. Graham S(no puking up this time) 11. CJ 12. Paul_y3k 13. leett 14. Ian S. 15. TLicense 16. Halo Inc 17. Nic_F 18. NEO 19. Fastisnice 20. jusie 21. lotus 22. SupraStar 23. supradibbs (work permitting) 24. Martin R (work permitting) 25. Ian R 26. Branners (car permitting) 27. Dude ( the brighton belle) 28. Steve M (need a lift now though, supy sold) 29. Bill Prawn (possible, maybe). 30. Bammbamm 31. Kopite (if i got the supe out of the bodyshop by then ) 32. Vaughany (Work Permitting) 33. Matt Harwood (Clutch/lazyness permitting) 34. Cashpoint (clutch permitting) 35. Gatso & Soo 36. MONKEYmark (car permitting) 37. SimonB 38. Hy-Performance (Chris) (Work, Clutch and Car permitting lol) 39. Adam Fennell 40. Jay 41. Laz 42. Phil the fixer 43. Bromy 44. Splurge 45. kghelmet(kev) 46. Ibrar Jabbar

Damn, Really sorry to hear about this, glad your OK though.

Any High Modulus silicon sealant will do the job.

That makes sense now On inspection there is nothing wired/wedged to hold the arm open. Is there anything else I should check for? I will test the pressure tank tommorow to see if that could be causing the problem. thanks for the replies

I have a similar problem on my UK spec which had the TTC mod already done. I have replaced all pipe work on x2 VSV to normal and after a few checks it looks as if the actuator doesn't move!! Is there any pointers as to where the actuators may have been wired/wedged open?

H&R Springs are available for the MKIV as well as coilovers, the springs are considerably more expensive than the Eibach's. If you need a quote contact me [email protected]

Colin, Have you considered the H&R coilover setup? I have received good feedback from customers I have supplied, possibly whithin your budget. Email me if yoy want further information, thanks. IJ

And me:thumbs: 1. millhouse (All weekend) 2. Paul E 3. DAVE222 4. leett (all weekend) 5. Sherriff 6. Gaz from Envy 7. Supragal? 8. CJ 9. Tim 10. Dude (poss whole weekend) 11. Ray 12. jay supra66 13. VeilsideTT 14. Geeza and Marky Mark 15. Trig 16. SupraStar 3000 17. dannyspeed 18. GetawayDriver (Sunday or maybe all weekend if weather is nice) 19. Luffy 20. davemartin 21. Gatso an Soo 22. Wayne Pope 23 Ibrar Jabbar

Nice to meet you too CJ, it was a great event and lovely weather to go with it. Congrats go out to DUDE

This should be a top event and only down the road for me, so I'm in. 1. Dude 2. BigRoy 3. Monkey 4. Bobbeh 5. JB 6. Matt 7. Chris n. and son 8. outatime (31st) 9. Andyp 10. Ibrar (31st)

You will also need to take into consideration the hub center bore size (60.1mm).

Looking Good mate, I'm glad your happy with them

Paul, I will see what I can sort out for you will email you Monday with some options/availability

Depends on what tyres you want?

I can supply the Hi Octanes for H-147's 8x18 and 9x18 £700 all in delivered, If you require a quote for tyres please email me [email protected]

It all depends on how much you want to spend on wheels, ideal upgrade fitments are 9" front and 10" rear. The Bersaglio's are available to fit but ain't cheap, If you are interested in them email [email protected] and I will give you a quote, I can also give you some other options which are avilable. Alternatively visit http://www.pro-alloys.co.uk

The condensor is refered to as the air-con rad. Has the system been pressure tested for leaks?