Jump to content
The mkiv Supra Owners Club

Ibrar Jabbar

Club Members
 View Profile  See their activity

  • Posts

    2683

  • Joined

 Content Type 

Everything posted by Ibrar Jabbar

  1. Ibrar Jabbar
    Here's Nissans not so nice concept.
  2. Ibrar Jabbar
    I am trying to locate the correct plug for the VVTi control pictured below, is there anybody out there who can take a picture of the female 2 pin plug for me? thanks.
  3. Ibrar Jabbar
    Used Mocal sandwich plate and filter relocation head see pics below £45 + P&P The remote head has port for oil temp/pressure sensor.
  4. Ibrar Jabbar
    I have a polished top feed fuel rail (possibly Precision) removed from My VVTi engine. Surplus stock as I now have a Hypertune rail. Available with all fittings, etc. £60 + P&P. I can anodise for an extra £25 in most poular colours if required. I also have the runners available. £30 + P&P. I can powder coat for an extra £25 in most poular colours if required.
  5. Ibrar Jabbar
    Very nice, I like that
  6. Ibrar Jabbar
    OH yeh, thank's to You & Johnny editted to add DBW
  7. Ibrar Jabbar
    Thanks Guys. The car will be pretty unique when it's finished. 93 model Aerotop with complete facelift conversion, VVTi single turbo LS7 converted DBW, 6 speed, Oh yeh I forgot it's widebody too
  8. Ibrar Jabbar
    All spoilers have been sent out now and will be with you shortly, apart from RobD and Jazz who will be receiving there's Mon/Tue next week. Thank You for your orders, this Group Buy is now closed.
  9. Ibrar Jabbar
    Managed to find some time to powder coat the sumps. Fitted new stainless bolts. I used loctite 5910 to seal the sumps up and torque back to OEM spec. Decided to anodise the fuel rail red to match the runners. Updated engine pic.
  10. Ibrar Jabbar
    Thanks for that Nic, I will have a look into them shortly. John, thanks for the offer I will make some calls and find out later, thanks.
  11. Ibrar Jabbar
    Can anybody help Me with part numbers for My 98 VVTi turbo engine loom. I need the following: Ignitor electrical multiplug. VVTi electrical plug. Thanks in advance.
  12. Ibrar Jabbar
    If it's not to late can you delete them out of My loom too?
  13. Ibrar Jabbar
    Yep, all the same.
  14. Ibrar Jabbar
    Your in the queue Jazz sometime next week mate.
  15. Ibrar Jabbar
    They will definately need prep, prime & paint as they are not finished for fitting like any GRP parts. I would suggest bonding them on with a bonding sealant like Tiger seal, thanks.
  16. Ibrar Jabbar
    No probs looking forward to the pics.
  17. Ibrar Jabbar
    LOL, Yep spring and diaphragm.
  18. Ibrar Jabbar
    Straight forward then, just unscrew the 6 cap head bolts whilst a mate holds the top cap down. Here's what My Turbosmart WG looks like with the cap off.
  19. Ibrar Jabbar
    Thanks Guys. Just waiting on Titan and Unorthdox pulleys to come in from the States now.
  20. Ibrar Jabbar
    Should be an easy enough task for you Rob, get a mate to hold the cap down while you unscrew it, it's that easy. What gate do you have?
  21. Ibrar Jabbar
    I can still supply them to order
  22. Ibrar Jabbar
    Thanks Jamie, after seeing yours I knew it was the right choice
  23. Ibrar Jabbar
    My Hypertune manifold and rail arrived this week and what a nice bit of kit it is I set about stripping it down as I wanted to anodise the runners red. Test fitted The blue wategate cap also got anodised red to match the rest of the bits
  24. Ibrar Jabbar
    The VXR seats don't have any of the electric lumbar supports and that's one of the things that makes these seats so good.
  25. Ibrar Jabbar
    If you do go for RS4's be prepared to remove the floor mount and weld in custom mounts, otherwise the seats will sit to high.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.