Ibrar Jabbar

If you can send me a picture of the bolt with dimensions, I will post one out to you FOC. Any questions PM me I will happily help you out.

Check Scott M's project thread he posted up the instruction sheet.

Wheels are done and looking good http://mkivsupra.net/vbb/attachment.php?attachmentid=148012&d=1331417721 http://mkivsupra.net/vbb/attachment.php?attachmentid=148013&d=1331417721 http://mkivsupra.net/vbb/attachment.php?attachmentid=148014&d=1331417721

Hoping to make it to Japfest and a few others in the Year

Hi Steve. Thanks, Yes car is at my work place, give me a shout when you want to pop down mate Hi Matt. Thanks mate, dash pics are on pg 49 added again for you here. http://mkivsupra.net/vbb/attachment.php?attachmentid=145381&d=1328043497

Now were talking, I drove a re-mapped RS6 last week, what a monster

LOL, no need for that. I will set up a group buy, price is going to be between £150 - £185 depending on numbers.

The first copy will be ready Monday after that I can get one ready every other day. I am looking into carbon but won't be for a while. Thanks Thanks No problem, thanks Won't be long now Next week Monday you will see the first copy

My dash has been re-trimmed in alcantara (never flocked) which came out of the facelift donor car and never suffered from delamination.

Nice feature, congrats

Gold center CCW's will look the business Rob

I will have pictures next week. Please PM me delivery details again, thanks

The slots are just for weight saving and won't be interchangeable unless the center has the same outer circle PCD.

Yes of course as many as you need

Thanks LOL, once I start I can't stop Many thanks Guys Spot on, thanks LOL

I thought the same

Full version will be done by Monday now. Will be with you Thursday Jazz. Pics added. Please PM delivery details again mate, thanks. No delivery cost on replacements Jazz.

Sorry about the massive delay on this guys and for those who got a faulty spoiler, thanks for being so patient for a replacement. The new mould has been made much better and won't encounter any warpage problems this time round. I will also take time to individually check each lip before despatching. http://mkivsupra.net/vbb/attachment.php?attachmentid=147738&d=1331071046 New batch test fitted, fits perfect http://mkivsupra.net/vbb/attachment.php?attachmentid=147739&d=1331071046

Pics added Many thanks, bumper is TRD with the the tooth shaved off. I was flat out mate trans tunnel took 3 hours from start to finish, loom took ages.

Had a productive weekend worked on the car till 4:00 am last night and got loads done. As I am doing a complete VVTi facelift conversion, I started off by removing the dashboard / heater airbox and gutted the NA interior wiring. Gave it a wipedown to get rid of 18 years of dust. Facelift loom ready to go in. Facelift loom fitted, this runs all the way to the back on both the near side & off side. I also made a start on fitting the engine bay loom from the facelift donor car. I hid most of the wiring but left the fusebox in the bay for now. Battery will be relocated in the boot. Next up I fitted the clutch pedal and master cylinder. Swiftly moving onto removing & refitting the transmission tunnel for the 6 speed conversion. Welded, seam sealed and insulated the new tunnel top. Underneath shot, stone chipped ready for the box to be fitted next week.

Bump I have two more TT front and rear ARB's available can coat in black, red or silver. £65 each delivered. TT runners still available.

Two intercooler cores available. Used 4" Blitz Intercooler 24"x10.5"x4" has some Fin corrosion / damage as seen in pics. £80 delivered. Used 3.5" Whifbitz intercooler 24x12x3.5. £80 delivered.

Thanks Guys Thanks Wayne, yes the piping would look good, but might be too late now though. Thanks Scott, I personaly love the diamond stitch effect They are not a straight forward fit, I had to replace the floor pan braces to make them sit low in enough. Thanks Iky, the material is alcantara.

When the car went in the aircon had not run for around 2 years. Obviously there was a pressure test, dye etc. Once diagnosed it was then a replacement part, which was quite cheap, I also had the system cleaned and a new receiver dryer installed. Most of the cost was labour. The guy is well regarded and as such charges full rates. Have to say his service was good and I was happy with the price. That's fair enough

New batch will be with me tomorrow, I will check them individualy before despatching on Monday.