Snakeysteve

Great thanks

Where is the best place for oem toyota parts online? I need some gear box bolts for my v160 and was wondering the best place online. Preferably with exploded diagrams. Thanks

The clutch stopped engaging on my car at the weekend. After inspection it seems the hydraulic release bearing has started leaking and drawn air in. After trying to bleed it j got the peddle back but is leaking quite bad. I was thinking about changing back to the standard slave and release bearing setup. My car is 730bhp and 840nm and is running a Tilton twin plate with a v160 Can anyone help with advice on if a hydraulic release bearing is needed for this setup or if the standard setup is ok? If a hydraulic one is needed any advice on what a good replacement would be? Thanks

1. Suprakeith from Peterborough 2. Probrox from Ipswich 3. TubbyTwo - Ipswich 4. TheTurtlesHead - Oundle, Near Peterborough 5. Aero-M - Ipswich 6. Staples230uk - Swaffham 7. Mugello - March Town 8. inazone - March 9. Second jump - Thetford 10. Lui - St Ives 11. DamanC - Colchester 12. SupraDan24 - Norwich 13. Lamboyello - Norwich 14. Leroybarry - Norwich 15. JasonR24 - Ely 16. V (Stephen) - BSE 17. Supra Steveo - honington 18. Camry5Sgte - Lakenheath 19. Ngilmore - Norwich 20. a98pmalcolm 21. `TSeng 22. J-Meiser 23.philly 24 . coza - Huntingdon 25. Jimjam92 - Swaffham 26. lewis.tt6 - Norwich 27. Paul - Clacton 28. Chasz86 - London & Colchester 29. Mysupra - Northampton/raunds 30. Snakeysteve - Colchester

My clutch went last night so looking for recommendations for a new one. My car is running 730bhp flywheel and 847nm Was thinking about the gw stage 2+, is anyone running this clutch? Thanks

ah ok mine is a 1994 so would be pre facelift thanks - - - Updated - - - cool thanks ill have a look

does anyone have a dash clock for sale? My one has been removed and replaced with a aem wideband gauge but want to put back to standard.

its fully built as below MAHLE PISTONS MANLEY RODS TOYOTA BEARING SET ARP HEADBOLTS ARP MAINS

ok great thanks

just wondering what rev limit you can run with GW264 CAMS And uprated valve springs Springs? I'm getting the car mapped tomorrow and the current rec limiter is at 7k rpm and just wondered if this could be upped? Thanks

nice find and great colour cant wait to see more pics

Great thanks

what rear subframe bushes would people recommend as i want to upgrade to something a bit harder but not solid. thanks

will anybody be going on the september meet? as i get my car back from mapping on the 19th august so will be good to meet some members

have you taken the pics yet??

what BC coilovers are people running? im looking at the BR range but then they has RS or RA or RH not sure which are best? also what springs are people running mines a TT6 thanks

i just got a quote from Luke @ sky and he saved me £300 over adrian flux and was great to deal with. highly recommend them

ill be running a 285 so no good to me thanks though

alternatively i could go with the below just not sure which would be the best fit 18 x 9.5 et 29 or 18 x 9.0 et 43 or 18 x 9.0 et 35

little update i have found the wheels i want and the closest fitment i can find would be as below. can anyone help if these would fit ok? thanks Front 18 x 9.5 et 45 rears as 18 x 10 et 35

I actually have managed to fix it now. Weirdly I just removed the bulb and put it back in and now its working. Thank you both much appreciated

it wont let me add the photo but its a grey bulb that goes in the back of the cluster for the indicator arrows

this bulb has gone on my clocks. Does anyone know if they are still available from toyota? Or know of anywhere to get one? Thanks

from looking a bit further at mine its running very small intercooler piping so im going to change that to a better size. ill try that and get it mapped again and see if that helps. thanks for the responses will keep them in mind if i do decide to change the turbo

Hi i have a hx55 holset turbo on my car at the moment and its far too laggy for my liking. what are peoples suggestions for a turbo for around 700bhp? i was thinking maybe a gtx3582r? thanks