Jump to content
The mkiv Supra Owners Club

Wipeout

Club Members
  • Posts

    406
  • Joined

Everything posted by Wipeout

  1. Yip. Good old Fareham. This bit off scenerey must be very popular as a few of you guys have spotted it now. It must be time to move to a more secret location What's wrong with drinking the water then (Creek water that is not tap)
  2. Finished product. I opted to do the mod to a set of "superior" *Cough cough* J-spec lights, in my opinion, this mod suits these lights better than the UK lights. I have used the silver fusion type bulbs to avoid the egg look. Here you go.
  3. Flat battery. Can you get a jump start?
  4. I have noticed similar issues with slight drifting of the steering, it's predictable as to when it will drift as it happens at the same point on the same roads to work. Good old British roads. As with Darren, It was really noticeable once stepping from my old car to the Sup.
  5. That one has caught me out before.
  6. If the hazard light button has been disconnected, this will stop the indicators from working, and the hazards. Have you had the dash apart recently?
  7. Try here, red, silver coated bulbs. Click here
  8. There is another fuse box under the drivers side foot well, on the left hand side, check there for blown fuses.
  9. Here is a couple of links to breaking supra's. Click here 1 Click here 2 They may be of some use.
  10. Try ebay, i managed to get some from there. Click here
  11. Drivers side footwell, its marked on the lid of the fuse cover. 30A fuse - Spoiler. Hope it's something easy like that.
  12. PS: Swap ya a set of HORNS for some lights
  13. Is the J-Spec bulb holders different to the UK rears? I also prefer the look of the J-Spec rear lights but can't be bothered with the re-wiring if the holders are different.
  14. It is on the back of the light. It clips on as the light is pushed back into place. Cheers Lee.
  15. Does anyone have one of these little clips that are on the rear light clusters. I broke one OR know where to get one. Cheers poeple.....
  16. Hijack Is it possible to use the bung bit as another boost pressure point? Or would there be any benefit for fitting a temp sensor to monitor intake temps.
  17. Look Here This might be of some help to someone. Is this anyone on here??
  18. Wipeout

    newbie help

    The mirror heaters are activated when the rear window heater is turned on. As for ABS i guess just pull the fuse.
  19. And it's a bitch to work with cause it's tough stuff. Have a go at cutting some 60mm bar with a hacksaw, not fun. I guess the parts of a turbo are cast and I don't think this is easy to do using titanium, could be wrong though.
  20. Good choice Any mods yet??
  21. Si, you will have to let us know how to tackle this one. I have the lens ready to go in, but was a bit unsure where to start, Melting bits and pieces.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.