whitz

Il be there in mine, been invited onto the banzai magazine stand so thought why not Ash

bump, had a buy fall through so still needed Ash

As above wanted carpet, doesnt matter too much on color or condition as il be dying and chopping it Prerfer close to west mids so i can collect or if possible posted Thanks Ash

ive got one here along with a bunch of other buttons/switches im not using but its come out of a car that was untested Ash

i should have the heat shields in one of my cars i use for storage If you want a pic message me on FB ashley whitsey as given up after 4 failed attempts for pic to upload on here Ash

Havent updated in a metric age but il throw a few up as forum is being abit nicer un upload sizes quite an old pic with wheels on before bodycut and other items and paint engine mocked up in place with ats manifold and hx40w turbo top mounted rear end with towbar and wiring in place, anderson connector hidden under numberplate having a boot build/box in for all the air ride and battery setup so its out of the way pair of 019 batterys random pic of inside the car after tunnel all made up and various other items 3/8" airlift 3P management and universal 5" bags + sleeves along with various poly bushes and brackets various suspension parts engine mounts and dash bar just out of the powdercoat oven just because i can test run of the engine to check for oilpressure and no issues, since removed to finish the tunnel welding and a tune up

in the unlikely event these are around still in a few weeks il have them, feeling abit thin after a new clutch and flywheel:( Ash

Hey is the scuttle panel and dash trim pieces still available? (mainly the one with the heater switches in) Thanks Ash

I don't really update here often as resizing all the pics is just effort, but there is a build thread on retro rides but i shall just leave this here Ash

scuttle panel and front wiper arms posted? Ash

if not gone to the above two il take it, or even if it goes to one of the above i need a bare one Ash

Not sure if your getting the PM's back but im still after the scuttle panel, wiper arms, handbrake link + indicator/headlight stalk and ideally the plug too Ash

Price for the plastic scuttle panel + wiper arms and the handbrake cable T piece splitter show in one of the pics Posted to west midlands Thanks Ash

Hey all Im in need of the handbrake quadrant that goes from the single cable on the handbrake and splits off to the other cables that go to each wheel Thanks Ash

Had 1 day over the weekend due to shows so pretty rushed Before pic of under arhc just for reference and show what i started with one box full of brake parts for the rear, solid +flexi hell lines Mtec discs blacked handbrake shoes and fitting kit Dropped the rear subframe to clean and paint it up (havent got time to get it blasted and coated) upper arms where polybushed which was a bonus Mostly all stripped down 2 arm stuck in place (camber bolt seized to bush and centre turned) will sort out at a later date doing the under side section by section one medium layer all over for a nice finish then doubled up on the seams to give it a really nice finish subframe coated heavily in paint after being de rusted like all the arms etc assembled wet so got covered in the stuff, not the prettiest but will need some touch ups Ls400 rear shafts are too long and jammed up hard into the diff so will have to shorten and sleeve like i did on the fiat Quick test fit of the ST205 2 pot rear calipers to make sure they bolt up (which they do) with stock dics, annoyingly the temp wheels do not fit so taken back off but ive still got to order in handbrake cables (was broken) and fit all the handbrake items when they arrive Ash

update from weekend, half cage built, decided against a full cage due to dash bar and my bad joints i suspect i wouldn't be able to get back out feels like something is missing Joys of handy places Good friend scott giving a hand on these stupid ideas of mine exo skeleton? nah main hoop in and side brace rear bars in with harness bar start of bucket seat mounts onto the floor engine mount spreader places welded onto the front legs to help stop the engine ripping it to bits Ash

i think ive got a right hand set of these il check for you tomorrow

this rear quarter panel crash damage cover up anything to do with you ? Pulling pretty much everything thats left of the car out, dash, plastics, rear seat, wiring loom most of il pretty much not use as il do a fresh rewire as 90% isnt needed Ash

damn if these dont go il have the fronts, moolah waiting Ash

Yes the title is correct this will be the build log as such for the cummins powered supra Few pics as it sits at my work, currently in the compound next to the rovaru not much left inside but fine for me will be stripped and caged up 3.23 open diff off a LS430 in the back with prop etc too recon's LS400 4 pot front calipers Going by my Guesstimations (the best kind) im betting the LS400 (307mm) discs will fit with these celica ST205 2 pot calipers, share the same discs bar 0.5/1mm thickness difference and use the same pads as the supra so will be somewhere close Mtec drilled grooved discs with black coating as the cars theme will be black on black When you dont want to drive the van so you turn up to a really nice area in your workhorse and strap a bonnet to the roof and go home via the M6:sly: Ash

Damn unlikely for both of them to bail on them but add my name to the list and id collect Ash

yeah i figured that out of a short "mong" session all paid up now Ash

Well after waiting up one day i had a thought, its still a bloody good idea After loosing 2 of my storage places in 2 weeks (shite) ive shifted some of my other items and supra is about 2 weeks away from going into full project mode Ive now obtained LS400 front calipers 2 pot rears new discs (drilled/grooved) new pads, new Hel braided lines solid lines and fittings all around along with a line lock for the front and all new handbrake shoes+ fitting kit Few minor interior items have been obtained such as a boss kit pair of OMP trs-e's and harnesses, should have rear lights diff propshaft and driveshafts by the weekend along with the custom made to order 18" steel wheels If all goes to plan il have it down one of the other workshops and build a cage over the weekend in a month when its been prepped Ash

long shot bonnet gone? Ash

looking good to me, people will probably hike the prices up to stop a derv build tho I should be havign the bucket seats and harnesses turn up tomorrow But i could do with some help as im currently struggling to find the LS400 pad fitting kit+ pins and same for the TT 2 pot rears, if anyone also has the bolt length size and pitch for the calipers that would be much appreciated Thanks Ash