djmakz

Hello again. As an update for the RH cluster - I have resoldered all ribbon joints and checked continuity and all still seems to be fine. I can light up the bulbs from the socket. Once in the car harness though not a single light. I have checked the harness and could only find 12v in ECM (cable 3 on diagrams) and 0.25v in the other ECM (cable 4). Should I expect 12v on any other cables? See attached for the diagram of the continuity (may be useful for others, apologies for my ignorance in electric diagram making!).

Hi Kev, thanks for the reply. Do you mean these? Is there a particular one I should try since nothing works? Like ground or something. I got the diagram for the harness, but havent checked if the order on the cable is the same. I do have a soldering iron, but Ive used it once in my life. Anyway - will try it tomorrow and will update if it helps.

Hi guys, managed to sort out few issues I had with dashboard electrics, still there are few left and I am at lost. 1. RH Telltale (check engine, ABS, oil) 83950-14010 - it simply doesnt work. Managed to take it apart, all bulbs ok. There seems to be voltage on at least one line on the harness (got 12v on one and 0.9v on another, cant remember which one is which one, will have a look later on). All solders look fine, board itself look fine. Any tests I can make? Are there any common faults with it? If I got voltage coming in on the harness, shall I safely assume a replacement will fix it? See pic 1 and 2. 2. Digital clock 83910-14400 - apparently quite common issue. Again - it doesnt work. Got power on the harness, but clock is dead. The screen got a small burn out in the corner (see pic 3). I wouldnt imagine there is an easy fix for this one and its nearly impossible to get hold of another one at reasonable cost. Has anyone done any conversions or have you got other ideas what to do? My new radio got a clock built in, but at a cost of song titles, so I still would prefer to have a clock there if possible. 3. Defogger light - defogger works fine, but confirmation led is not coming on. I managed to take this module apart and test leds - all good. Still, defogger is operational, does the job fine, but no light is coming on. All other confirmation leds are working correctly, only this one (see pic4). Any help or ideas will be greatly appriciated.

Hi there, new Supra owner from South Wales. Always wanted Supra, so finally got myself an auto aerotop NA. Now that weather picks up I will look to slowly get it back to great condition. There will be some posts for help, got no doubt. Still, as there is so much great information on the forum already, managed to sort few things out without begging for help. I got no immidiate plans for major changes, but small ones - as with every other Supra owner - are a must. Thanks! Max

How can we find you guys? Don't want to ask everyone if they came in for Japan cars meeting

count me in