djmakz

Prop shaft that was to be installed for the hybrydised box, but went manual in the end. This means it would fit small flange rear end, but gte auto up the front. £250, located in South Wales

Surround in ok condition, a couple of clips broken and a paint chip on the side, but was holding perfectly fine. £50, located in South Wales

auto shifter in full working order. Leather knob has been replaced a couple of years ago. hasnt been used much since, so knob is in as new condition. £160 ono. located in South Wales.

PMd

https://www.ebay.co.uk/itm/154702470628 they are off my Supra, should fit Lexus somewhat better

Aberdare Tesco station (by McDonalds) also offers Momentum99 FYI.

In process of booking Bristol Motel as well. Will join in Hereford on Saturday morning.

Hi Edvard, got one available. Was looking to do a hybrid conversion, but ended up with BMW manual instead, the prop was done ready for the hybrid autobox and a small diff. Let me know if its what you looking for. Unsure how much its worth?

Djmakz - Wales

Aberdare area.

Check

standard ge with emanage blue piggyback

Hello again, I need some cheap 430-480cc injectors as a temporary gap filler to install in the NA-T. Already bought FIC 775, but these will have to wait for different ECU, so probably a couple of years away. Eventually I will need the A02B diff as well if anyone got spare one? Thanks

ok, got the flex plate (thanks mellonman), till trying to find a prop shaft in a decent price. noone has any spares? the front part will suffice anyway

PM sent.

hi there, Im in a need for a TT auto propshaft and a flexplate to replace my NA auto with the hybrid auto box. I am unsure as to what costs to expect? Havent contacted Toyota yet, maybe they'll have the flex plate at least? Any advice or offers appreciated.

Ive noticed the annual mileage made massive difference when I was looking >5000 or

63 plate Passat Estate 1.6 TDI lol

1. Blythmrk x2 2. charlton x2 3. MrGRT 4. Supra-love x4 5. Mwilkinson x 2 6. samdale 7. Hamilton 8. Sheefa 9. ShawnPreece x 3 10. Kev.O 11. RobUk 12. djmakz x2

checked the obvious? https://www.bremboparts.com/europe/en

I've enjoyed the first episode and definitely pleasantly surprised. As to the supra - I cant wait to see it, but regret I didn't know it was filmed literally couple of miles away from my house. I've only found out on my way from work ON THE SAME DAY that it already happened and everyone enjoyed. So disappointed.

Ill take them. PM sent

Checking bidding history, there were few different bidders around this price, so I'd say it looks like a genuine price considering its a manual.

Ill have one too. 39. djmakz

Thanks both for the answers. Ive got 2JZGE JDM, so injectors are 315cc I believe. I was told it should be sufficient up to about 350-380bhp @95-100% and this is my current power goal. I'm aiming to get a NA-T setup for next 3-5 years and then decide what to do next, so prefer to cut any avoidable costs. If there would be reliable and inexpensive solution, then maybe I could add it straight away. Total potential power I am looking to achieve at some point would be about 550-600bhp and although everyone says there is never enough - I feel this would be more than generous power for my driving skills (or lack of it), so if I would look to change injectors as well I would look at 650cc or similar. As to the pump - I was looking at the UK OEM one, which provides 300lph and is apparently more reliable and quieter than walbro. It should provide enough fuel even if I'd decide to keep this GE engine when going full power in the future. I'll start enquiries with my local garages week after next (I'm away) to see whats a cost of the OEM one, but perhaps there are better places than toyota to look for this pump or - as you've advised - perhaps its better to go aftermarket. Thanks again! Max