Izzy
-
Posts
123 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Izzy
-
Thanks Chris. I'll look into it
-
Hi all. I just did this conversion with PMC kit and BMW gs6-53dz box. It really isn't straight fit... I had to make my own gearbox mount and prop shaft. I also used this Short shifter. Everything is bolted, but now the clutch doesn't disengage. I have spacer between crank and flex plate and longer pivot pin on clutch fork. How did you guys sort this out? I'm thinking extending the slave cylinder shaft for about 5mm? Or make spacer ring for between release bearing and clutch fork to space the release bearing forward towards the pressure plate?
-
***420G getrag m3 6 speed conversion*** Help please
Izzy replied to philw99's topic in mkiv Technical
Hi all. I just did this conversion with PMC kit and BMW gs6-53dz box. It really isn't straight fit... I had to make my own gearbox mount and prop shaft. I also used this Short shifter. Everything is bolted, but now the clutch doesn't disengage. I have spacer between crank and flex plate and longer pivot pin on clutch fork. How did you guys sort this out? I'm thinking extending the slave cylinder shaft for about 5mm? Or make spacer ring for between release bearing and clutch fork to space the release bearing forward towards the pressure plate? -
Thanks
-
Found Hi all I need your I want to purchase a side mount intercooler from Sweden on this site: intercooler-supra-twinturbo-1993 They don't post to Slovenia (I asked ). They only post to Sweden, Denmark and Finland. So if anybody from mentioned countries are willing to help me out, let me know I'll pay you for your trouble
-
Hi. Would you post this to Slovenia (Europe) area code 8263? Drivers side A pillar trim - £25 Is it this trim circled in red? [ATTACH=CONFIG]230918[/ATTACH]
-
Hi I'm interested in (Driver a pillar plastic £10). Would you post? Is it this piece circled in red? [ATTACH=CONFIG]230652[/ATTACH] Thanks. Izzy
-
Ok. No problem mate. I already have akebono bbk calipers
-
What type do you have? I can get mtec grooved for £130 new to my address.
-
Still searching. After new year I'll order new if nobody have used
-
you have pm
-
Got the front. Just need rears now.
-
You have pm
-
Thanks, just got a message on facebook for fronts. Waiting for a shipping quote.
-
Nobody have these?
-
Hi. I need TT UK brake discs/rotors front and rear, for my project, so i can make some caliper spacers. Does anyone have them lying around? I need them to mock them up. Don't want new You must be willing to send them abroad. I'll pay postage and some extra if they can be reused for a few test runs Thanks. Izzy
-
I'm trying to make a caliper spacer for 370Z BBK Akebono to Supra knuckles.
-
Doens't matter which one. If I'm correct, the mounting points are same for jspec and EU spec?
-
Hi. Does anyone have dxf or any other 3D drawing of brake caliper and knuckle for Supra for CAD program? It doesn't matter which one (small or big). Want to make some adapters for brake calipers. Even if you have a technical drawing it's good for me, I'll make 3D myself. Thanks.
-
Great videos
-
You have pm
-
Found Hi guys. I need front left light loom for H3 for prefacelift (fog light and with loom for sidelight/parking light). As in pictures below. Thanks Izzy
-
Delivered. Thanks
-
I have bought the brakes. Thanks everyone.
-
Spunkmeyer you have pm
