dandan
-
Posts
4928 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by dandan
-
Just sent you a pm about the blade and bearings.
-
Write letters to the local branch ASAP and send them by recorded post, perhaps include photographs as well. Cover yourself as much as possbile in writing if you really want to try to keep parking there and not get caught out by some same day clamping scheme.
-
Yes. If you know the part number (as quoted above) then they can be highlighted on the drawing. It doesn't work the other way around though!
-
Paul - did you get my email...?
-
Do you still have the blade and wheel bearings?
-
I have one of these 90363-45012 and am about to cash it in at Toyota for some other parts. Did you get one sorted?
-
That's weird I just wen't through all the models listed like that and all show the bush on the picture but list it as "not applicable". JT8JZ31C.. JZZ31L-ACPVFA 08/1991 - 06/2000 JZZ31 USA 2JZGE ATM 4FC JT8CD32Z.. JZZ31L-ACMVFA 11/1991 - 08/1997 JZZ31 USA 2JZGE MTM 5F JT8UZ30C.. UZZ30L-ACPZKA 04/1991 - 08/1997 UZZ30 USA 1UZFE ATM 4FC JT8CH32Y.. UZZ30L-ACPZKK 04/1991 - 08/1997 UZZ30 CND 1UZFE ATM 4FC
-
Pic related to my pm about the trim bits....
-
Drop me a pm on the side trim bits and vent hole pieces, I'll take them if you're not after silly money.
-
Can you tell me a frame number (or market at least) that lists these bushes as available parts on ToyoDIY so I have a browse around please?
-
I can tell you that the later facelift Supra arms (different part numbers and much more expensive) are the same as the early Supra ones except the bushes are softer. I'm tempted by these little beauties Vagnum, do you know if any other Soarer bushes fit the Supra arms? How much were these ones?
-
for sale Toyota Clutch Parts For HKS Twin or Triple Plate Clutches
dandan replied to dandan's topic in Parts for Sale
Bump -
Good question! Do you have the part numbers for any other similar bushes? Are these the ones listed for the Soarers?
-
Much better in dark for your colour of car Wez! Plus the brake dust will be harder to see...
-
I would probably sell them for the right sort of money. Right now they are sat in my garage wearing their Eagle F1's, waiting for fine weather (as I bought a set of Rotas for winter use) to keep the CR's looking nice
-
Easily done especially if there's copper grease on them and you still put in the usual amount of torque...sorry I can't help with finding ARP ones though
-
I have the following for sale which are brand new MA70 Supra parts that you need to fit an HKS twin or triple plate clutch in the mkiv. Release bearing: 90363-45012 Snap ring: 96152-00450 Snap ring: 90520-67001 (I'm not 100% sure if this one is needed but I'll throw it in for free anyway). £27 delivered. Cheers Dan
-
Release bearing 90963-45012 Snap ring 96152-00450 Snap ring 90520-67001 Flywheel bolts 90910-02103 x8 All brand new, £58 including postage. Cheers Dan
-
I do. 18x9 front and 18x10 rear. Why do you ask?
-
Chances are you just put too much strain in (or someone else continually has in the past). This could be easily done if you had copper grease or something on the threads.... Were they clean and bone dry? Any idea what torque you did them up to?
-
I didn't know such a thing existed. What's their advantage?
-
I'm not sure...it just looked to me like it exitted the head at the back and went to the heater matrix. Hard to see from that pic and not something I've ever given much thought to.
-
Would it be wise to keep the rear cylinder head take off (normally for the heater) to help keep the rear of the head a little cooler on a track car? Maybe run it around and into the rad feed or to a small cooler somewhere?
-
Do you have a part number for that bearing?
-
I need this for my oil feed line. Anyone got one or know where I can get one? Cheers Dan
