dandan

I'd like the door cards if they're perfect mate.

If you ceramic coat it then it won't look rusty at all.

Good move - easy fix too

Do you have a filter on it?

Just read this chaps - holy hell, glad you are both ok!!! I wouldn't hesitate at all mate. (Hans or something similar - small money really for the added safety)

Well done Mike What boost was that at?

OK John, I have the following in black anodized: 3x AT949091 M12x1.25 to dash 6 90degree swivel http://holley.com/AT949091ERL.asp 5x AT800106 Dash 6 straight swivel https://secure.demonweb.co.uk/earls100/earls_shop/index.php?main_page=product_info&cPath=2_4&products_id=291&zenid=30a74d3d8fe810f05415ee5ffa18c7c7 1x AT804606 Dash 6 45degree swivel https://secure.demonweb.co.uk/earls100/earls_shop/index.php?main_page=product_info&cPath=2_4&products_id=297&zenid=30a74d3d8fe810f05415ee5ffa18c7c7 1x Speedflow Dash 6 45degree swivel http://www.speedflowshop.co.uk/-06-black-anodised-45-deg-hose-end---tvb0645k-1369-p.asp 1x AT982406 Dash 6 three way tee (black) https://secure.demonweb.co.uk/earls100/earls_shop/index.php?main_page=product_info&cPath=138_148&products_id=503 And then in blue: 1x 807691 Dash 6 hose end to M12x1.25banjo http://www.jegs.com/i/Earl%26%23039%3Bs/361/807691/10002/-1 1x 991945 M12x1.25 to dash 6 adaptor https://secure.demonweb.co.uk/earls100/earls_shop/index.php?main_page=product_info&cPath=138_143_183&products_id=485 I've got other bits too like female/female swivels, various adaptors etc but I figured these would be most useful to you. Cheers Dan

That seems a little on the low side mate for 1.6bar. Was that at SRR? What turbo, DP/MP, and exhaust do you have?

You just beat me to it

Thought so....

Good idea.

Good man - thanks. Do you have anything similar from either side at the rear?

Scott - could you post up the dimensions for the KSport parts that you used to get to this please (piston sizes and pad heights)..I'm doing some brake kit comparisons and I don't have anything for KSport. Cheers Dan

I may have some Earl's pieces that would be perfect John - I'll see what I can dig out tomorrow night.

I've got one if you get stuck.

Best of luck for tomorrow fellas

I just thought I'd post this up as it's not something I had seen before. I bought it in the US and it's actually pretty good. Unlike my other UK manuals, this one has engine, transmission, body etc all in one Anyone else seen these before?

Fancy buying this? Would be easy as pie then http://www.mkivsupra.net/vbb/showthread.php?t=210422&highlight=hoist+aluminium Sorry I don't have a regular hoist to lend but I will ask around tomorrow at work...

I remember these Didn't dude make them?

You boys headed there tonight and staying over or just driving direct tomorrow?

Mine (TRD front) makes a significant difference and the difference is most noticeable on rough uneven surfaces at low speeds...typically when the road surface means the ride is quite "sharp or jarring". I had it off for about four months and when I refitted it a month ago the difference was immediately apparent.

Good man Sending would suit me best mate as I'm not over your way any time soon. Is that going to be ok? Just to check, does it include all the bits circled in red in the pic? I don't suppose you have a back one as well do you?

Thanks Mig - I did drop him a pm but no reply yet. Any luck yet Rob?

Can you tell me what size the male and female spigots are please? Are they 60.1mm to suit a Supra or something bigger? Cheers Dan