dandan
-
Posts
4928 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by dandan
-
I was doing some cooking this morning for some friends who stayed over last night and nine out of nine eggs I cracked open to fry had double yolks in. That's got to be pretty slim odds surely There's three left in the box and I am tempted to go crack those ones to see if we could have had a whole dozen "double yolkers"!!!
-
What happened to your old T67?
-
Sorry to hear that
-
Like this...
-
I scrubbed the underside of the whole car with various brushes and soaps before doing any real prep work - that's what took the time. I'd recommend it to anyone now, thank mate.
-
I just finished doing the underside and wheelarches on mine with U-POL Raptor bed liner as recommended by someone on here. It took a lot longer than four hours (mainly due to all the cleaning and prep work beforehand) but was worth it and it looks very neat. It is quite hard (compared to an "underseal") and extremely tough.
-
Can you post a pic of a "flat" one? I thought front and rear were 100% identical.
-
What do you mean by collar?
-
As I understand it there has been a change to either the damper length or the circlip groove positioning somewhere along the line with the aftermarket yellow Billies. Are you able to take a measurement off them from say the lower mount hole centre up to the circlip groove? I have an old front one at home and I could do the same as a check.... If the groove is of then you can get a second one machined in to drop your ride height.
-
-
I don't suppose you have a part number do you Charlie?
-
This is a great piece of kit - I would recommend one to anybody now that I have it fitted in my car. Thanks Paul
-
See you there guys
-
Good luck mate. Got mine in the morning too.
-
Sounds fine Chris, thanks. I've just emailed you with my address, please drop me a reply with your bank details. Thanks.
-
I put ~570bhp through a triple box 2 7/8" exhaust at 1.6bar on the 67DBB and it was very quiet, so you'll probably be fine for a while on that exhaust mate. I'd make sure you spend money wisely on the best ECU, injectors, plugs and mapper you can find - that's what will keep the engine safe. I'd stick a single Bosch 044 pump in the tank and use the stock line to the fuel filter and the stock return from whatever FPR you run. Make up some dash 6 lines to feed your new fuel rail from both ends and then call it good. That'll see you through OK for low 600s anyway.
-
After doing some digging on here Chris it seems they come in at around £50-55 from Toyota for a full set; I'll admit I didn't ring any dealers to check though. Drop me a pm of what you want for them and I'll transfer it over to you today.
-
wanted Mainfold, waste gate & exhaust - must have this weekend
dandan replied to Pig's topic in Parts Wanted
Welcome back stranger. I think Wez has an HKS gate he was selling. If he's not, then I have a Precision 46mm V band I could bring to SRR on Saturday. I'm already taking one for Jamie -
No problem mate, which one do you mean though? That's a lot of power especially if you're aiming more to the 700 area. You sure you want that much?
-
There's room for that wastegate port to go out to well over 40mm diameter Nic - that's bigger (and not to mention a shorter route and much nicer routing angle) than the majority of tubular manifolds on the market. I do agree it's crap in the "off the shelf" state though
-
Now that's the sort of outlook I like
-
Nice looking setup JP. I can see why you might have boost issues with that manifold though, the feeds to the wastegate are coming off the runners at a 90 degree angle so the exhaust flow will massively favour the direct route to the turbine housing. There's probably not much that can be done in the space available though. What springs have you got in the wastegates?
-
On a related note....sorry for the slight hijack but I think it's still relevant to your post. What do people normally do about seat belt buckle mounting points when they fit aftermarket seats?
-
Here's a few links to get to the parts with the manifold in....save you trawling through it all Wastegate Area and more Wastegate Stuff Crack Testing General Porting and more Porting Gasket Matching General "Kit" Stuff and Here
-
Have a look here at my project page, my single install is based around a Treadstone manifold: http://www.mkivsupra.net/vbb/showthread.php?t=194439
