Supraman1511

Gone?

Yeah probably OS Giken or Cusco 1.5 if anyone has any advice on that?

Thanks I thought you could just switch the diff flange? So if I took the A01a diff flange "small" PCD and put it in the LS diff, then it would match the prop? Either way you've given me an option thanks if I can use the 3.2 gear ring with the A01a diff and NA Auto prop with the ZF8 coupler, then that's perfect

Does anyone know if the front section of the NA Auto prop is the same as the TT Auto prop? The ZF8 kit is designed for the TT Auto prop which seems impossible to find (and I assume a big case diff) I am wondering if the only difference between the 2 auto props is the length (to reach the different diff case sizes) and the size of flange that connects to the donut? small flange on the NA small diff and big flange on the TT big diff So in theory the ZF8 coupler could also bolt straight on to the NA prop with small diff? Of course the 4.0xx diff ratio of the NA Auto would be terrible for the ZF8 BUT I have picked up a 2001 LS430 diff which is 3.2xx just like the 6spd, this is a small case diff with big flange SO... Can I switch the diff flange of the LS diff to use the small flange from my NA A01a diff and be good to go? (I'm also building a GE VVTi and boosting it to around 600bhp to go along with this)

On the cam covers, I see the metal fittings for the breather pipes have been removed. Are these usually removable or have they been chopped off?

Going NA-T with a FFIM and my GE magnesium covers have cracked tatty condition is fine as long as they don't have cracks / holes

anyone got one? how much would they typically go for?

Apologies in advance if this is in the wrong section. I recently did the heater matrix swap and moved my map sensor to get access to the water pipes. I took a pic of where it was but it's not very clear on what the brackets should look like. Is it 3 brackets? I have the map sensor still on it's part of the bracket and the earth cable still attached to its own bracket, these slot together to line up the bolt hole. There's 2 bolt holes on the firewall so am I being thick or am I missing a third section of the bracket?

Sorry for following you the whole way but I'd much rather stare at the back of a Supra than any other car. I was in my Honda CRV as the camping gear and bikes wouldn't fit in the Supra I was going from Bamburgh back to Wakefield

Sorry to revive an old post but I'm based in Wakefield too and just got my Aerotop back on the road

I'll have the trial rear bumper please

Beauty! Here's mine with the JR3s (Suspension not yet lowered as the arches needed to be flared)

I already bought Japan racing JR3 a while ago and quite happy with them, even if they are a bit heavy. The AME wheels are just taking up space in the garage

Yeah they really weren't for me either. Maybe on a lexus or something German..

Just at work so can't yet post all the proper specs but they were only made between 1990-1995 according to website: https://ame-wheels.jp/en/en-modelartstory.html They would need a proper refurb and respray and one of them may need welding