StainedBedSheet

[quote name='RZtwin']Is this the proper way to wire new Bosch knock sensors? My jdm supra 2jzgte currently has 1 wire going to each oem knock sensor. 1. Does polarity matter??? 2. Do I NEED to ground shielding mesh to body ?? [url=https://ibb.co/Chv75zD][url]https://i.ibb.co/Chv75zD/20201014-141255.jpg[/url][/url] [url=https://ibb.co/RcBdw5h][url]https://i.ibb.co/RcBdw5h/20201018-121750.jpg[/url][/url] [url=https://ibb.co/WttYZK6][url]https://i.ibb.co/WttYZK6/20201018-104210.jpg[/url][/url][/QUOTE] Are you using a stock ecu or standalone?

Pmed you

still available?

Hey there, I have a 1998 Toyota Aristo VVTi my mods are Precision 62mm turbo tial 44mm mvr wastegate 775cc fic injectors aeromotive 340 pump radium rail mapecu3 aeromotive fpr A340 with billet accumlators and transgo shift kit Hallman and a Grimmspeed Manual Boost Controllers ----------------------------------------------------------- I have a 10 psi wastegate spring put in, when I had it wastegate to compressor housing the boost would go from 9-10 psi in all gears. I had hooked up my Hallman manual boost controller and between 5200-6000 rpm it drops from 14 psi to 10 and then it starts to go back up. I thought I might have had a faulty boost controller, So I pulled off my grimmspeed boost controller off my Probe Turbo and ran that and I have the same issue. Now I just don't understand what it may be, Ive never ran into this kind of issue. Heres my Zeitronix logs I marked out where I did my pulls. ------------------------- http://s000.tinyupload.com/?file_id=83221953599613226723

who made the manifold?

I paid for it but I couldn't find any thing to show me how to shim it.

No I'm not a paid member

Ebv?

Thank you

For some reason links don't work.

How is this done does anyone have a guide? http://jkwebdesign.net/lsocbb/viewto...er=asc&start=0 This site the pictures are down, I'm just wondering what size of washers are to be used and how thick, and where they extactly go. Thanks for the help gents. EDIT: If someone can give me the part numbers for seals ill need i'm upgrading my torque convertor. I have a front main seal,rear main seal,cam seals. I'm not sure what seals ill need for the transmission. I don't know if the oil pan has a gasket it or uses just sealent same with the valve body.

Just incase you guys arnt on supra forums.... I'm having severe issues with my HKS EVC 6 Ive spent 1000 dollars on this unit with the EVC EZ writer.. and it's basicly there to look nice ive taken time off work to try to get this working and I can simply not get it to work please someone help me... http://www.supraforums.com/forum/showthread.php?949530-HKS-EVC-IV-6-HELP!!!-overboosting.

Can someone tell me if my board already has the resistors installed?