harryww89

But leaving a car on axle stands with suspension in full droop is far more impacting on the bushes and especially ARB's. As Chris said, put the tyres up to transition pressures (60psi at JLR) to prevent any flatspotting, remove the battery and be done with it.

Non VVTI - Mines ECU with HKS FCON V Pro Gold 3.24

Thanks for the replies chaps, I have a feeling it could be sensor/electrical connected on the basis it's intermittent, i'll take a look across the sensors with a multimeter and let you know if i find anything.

Hi Guys, Car has been giving me a headache this weekend with an intermittent misfire on right hand turns and vertical inputs (Bumps) under load conditions. This prevented me running at TOTB this Sunday after the issue started on the sprint track on Saturday. I'm wondering if anybody has seen this issue before? There is no issue with the car running on a smooth surface in a straight line on WOT, the issue is also not weather dependent from what I can gather. To confirm; Fuel Pressure is okay / Full tank of fuel was used on track Coilpack clips / Coils / Sparkplugs are all new No Boost leaks No Blockages on inlet or exhaust side Timing has not moved and remains set Boost Controller and Vacuum lines are okay I'm starting to think I have a dodgy ground or electrical connection but I'm yet to investigate. Any ideas on what else to look out for before I start doing an 8D and IS / IS NOT would be appreciated. Thanks Harry

Opinions, personal views on performance are not worth a dime. What does make a difference is solid engineering data. Brake temperatures after pedal applications at specific load, brake pressure and speed, fade resistance, component quality, material specifications and compounds, manufacturing methods, vehicle NVH, run out measurements of brake discs after 'x' applications...the list goes on...

@ SupraTRD_MK4 - Sorry, I will not post to S.A - I do not want the responsibility if it gets lost in the post.

Images for lights below; https://imgur.com/a/5KUUql9 https://imgur.com/a/qm907cl https://imgur.com/a/3VVzAQc https://imgur.com/a/c0basIX

Pre facelift lights in plastic - In good condition, no rust, require a flat and polish to remove the residue from yellow film that was applied to the lights, some rear connectors/plugs missing but these could be taken from your old lights - £100 + £15 postage Coilpack cover - Great condition - £45 + £5 postage Pictures to follow; Payable via paypal or bank transfer. Regards, Harry

Hi all, Could anybody please advise if there is a differential rebuild kit out there for the B03b differential? Seals/Bearings etc. I need to rebuild my ATS Carbon LSD with new plates, so looking to refresh the whole differential in one hit. I am willing to take the rebuild on myself, however, to save hassle and time, does anybody know of any reputable places that can rebuild high specification LSD's Many thanks Harry

1.crossy 2.Matt.L 3. Girth45 4. Harryww89

I'll be coming from Solihull Dom, so shan't be able to get to the meeting point. Will try get there for 7-7.30

What time do the gates open guys? Or I should say, what time do we need to be there for?

Just got mine sent through via email

Any idea on when the tickets are being sent? I have not received anything yet...

Now booked me and the girlfriend - Also booked 3 sprint runs for a laugh!