2JZMKIV

yes thats why i asked the question in the first place if i can put a intercooler wider but shorter in height over 1/3 its area will be covered which makes it efficient but the question is how wide mm is allowed on a supra 600mm max ?

Sorry for not mentioning i was talking about front mount intercooler.

Would anyone know max dimensions (LxHxW) of an intercooler core that can fit ?

Really really good information thanks!

why is stainless steel more common than cast manifold all the kits a browsed cast is usually cheaper why do people go for stainless steel manifolds ?

I have been reading recently about turbo manifolds because i am looking to buy one my question is: What kind of turbo manifold would be the strongest and can withstand great abuse like anti-lag ? because i am thinking of running launch retard 2 step what grade manifolds can survive and how long for say 2-3 seconds of launch retard anti-lag overall what i'm trying to say is i will use ignition retard but i don't want my manifold to go boom i wont abuse it much though i know that but i need something that can withstand at least a little abuse and not for extended periods. So i have heard inconel 625 is the best material whifbitz makes his manifold from 304 stainless steel what i am looking forward to buy is 321 stainless steel Can anyone provide any info over these ? thanks in advance.

that really makes sense thank you so much its good to have this forum and people like you

i would go single if i could but for that i need at least £8k which i do not have right now. I will go with whifbitz hybrids and eventually will get a single turbo kit. i needed that information so thanks a lot, do you have any idea where i can get a restrictor ring or is it a simple thing that can be made ?i do not drive my supra much did around 500 kilometres in 8 months so ofcourse there wont be much gain but i would run my car in 1.4 bar since i am not worried about turbo life.

I am truly sorry for not giving enough details let me be more specific here, reason i called my car bpu was because it pushes 1 bar and it came with sard analayse ecu ( like mines ecu) carbonetic (ats & across) twin plate clutch hks induction system hks evc4 boost controller pretty much basic performance upgrades but for some reason they kept the exhaust system stock i got aem infinity 8 with plug and play harness 5 bar map sensor and wideband its all installed and waiting for the rest now i will be getting aem 320lph fuel pump sard 800cc injectors ngk sparks and hybrid turbos with whifbitz intercooler so i doubt i will be having problems with cooling the air or not flowing enough fuel so the only problem here is the exhausts i will have to ask again after all these would it still be a problem to remove catalytic converters ? do i still need to fit a restrictor ring ? car has around 60k miles 100102km exactly and turbos are operating in true twin mode i cannot remember any more details feel free to ask and thanks for the information!

Hello everyone, I currently own a 1996 jdm bpu mkiv, the exhaust system it has is not stock but some sort of bpu exhaust system. I want to get rid of catalytic converters question is will it over boost ? I am going to buy Whifbitz hybrid turbos which can be pushed up to 1.4 bar as it says on the description would that change anything ? (whatever the answer is still going to buy them because my turbos are old and i believe they are good replacement ) Coming out from exhaust manifold there is the first catalytic converter then pipe follows the 2. one middle muffler/converter ( i really do not know if the middle one is a muffler or converter) and there it connects to hks silent type (type-s) muffler So my plan is to delete the first catalytic converter and the middle one and keep the hks muffler replace the middle one and first one with pipes will it work will my car over boost also i have hks evc 4 boost controller which has a max safe boost setting where it limits the boost (apparently) please help any information is strongly appreciated thanks in advance.

i am pretty sure its not about that because i got the car 6 months ago and i was driving it until i switched to aem infintiy 8 and it pulled fine on 1 bar with stable boost after ~4000 rpm on stock ecu no one messed with the sequential system after i got the car and again i am pretty sure it was on parallel mode and no one messed with that place ever so if you are saying it can switch itself back to the sequential mode then i would accept it and as far as i know parallel mode is necessary because even the slightest upgrade on car messes with the sequential system and it becomes inoperable.

Car was parallel when i bought it i could tell from the boost coming it used to pull fine 1 bar of boost had sard ecu before and still has hks evc 4 boost controller

It is still running in parallel mode i know it sounds like its in sequential but its not engine revs up to 7000rpm fine but boost goes down boost is not stable up to 4000rpm either it hits 0.5 then other pull 0.9 and after 4000rpm no boost at all

1996 rz bpu j-spec with aem infinity-8 turbos parallel mode Whilst tuning on dyno today after hitting certain level of boost around 4000 rpm-4200 (0.9-1.0 bar) boost drops rapidly after 4300 and there was no boost at all like 0.2 max we checked for leaks there was none, tuner said catalytic converter could be blocked i have a sort of bpu exhaust system it was on the car when i bought it has 2 cats and after that its hks type s muffler no matter what we did we could not get any boost nor power after 4000 rpm car was pushing 185whp which is a joke there is OBVIOUSLY something wrong here i need to know before i start tearing everything apart could it be the turbos ? or catalytic converters ? waste gates ? and also if i remove 2 cats and replace it with normal pipes would my car go into over-boost ? please help because i'm really stuck and totally feel like sh*t.

so i'm guessing certain areas in vacuum has lower values than the idle area in ignition map ? say below ~100kpa car idles at ~30kpa at ~10degBtdc ~800rpm so normally i guess it would be 35 ~ 40degBtdc below ~30kpa but when aiming for wrc type antilag to keep the turbos spooling at 3000~6000rpm below ~100kpa they retard the ignition by ~40degrees ?

I'm familiar with rev limit ignition retard but how does wrc type retarding work when they let go of the throttle turbo keeps spooling i'm guessing the vacuum area is being retarded and any other types of retarding if anyone knows ?

I am tuning my 96 j-spec twin turbo supra 6mt. It is bpu and i got the aem infinity 8 with pnp harness it has lots of differences with export models and that is why i am struggling a lot my stock jdm injectors are big trouble some say they are 430cc/min @3bar some say 440cc/min @3 bar and i could not find any info of their offset values as well i cant progress on my tunes unless i get my data right everything else is fine anyone that knows anything or where i can get help from please do reply thanks.

Hello, I own a 96 jdm tt 6mt supra and im currently tuning it with the aem infinity -8 i need to know every detail about nippon/denso stock j-spec injectors if anyone here can provide me; with the exact cc/min flow @3 bars (43.5 psi) 430 or 440 ??? and more details that is crucial for tuning the engine is strongly appreciated. thanks

I took the stock o2 sensor out fit the bosch 4.9 lsu sensor exhaust has been modified but how am i going to enable lambda feedback how to connect the white cable from the gauge to the ecu To enable the feedback?

I have the aem uego gauge type controller but how am i going to connect it to the infinity does anyone know?

Hello, i bought Digital Wideband UEGO Air / Fuel Ratio Gauge UEGO controller 52mm, Bosch 4.9 LSU sensor i have connected the gauge but not the lsu sensor question is can i get rid of the stock o2 sensor plug the lsu sensor where stock o2 sensor was and connect it to the gauge and from there to the ecu(infinity 8) or does the stock sensor has to stay and lsu sensor needs welding and connecting seperately ? car is 96 toyota supra tt bpu 6 speed.

Thanks and thanks for providing the link i know i worry excessively its a minor anxiety disorder im trying to deal with.

thanks alot i have been thinking this over and over lately i havent driven my car much say 150-200km yes i dont drive it much because i study in uk im from cyprus and car is in cyprus aswell so would you think any wear would have happened or am i just over reacting ?

Hello everyone, I own a 96 bpu tt with stock engine and stock turbos i use 10w60 mobil 1 but im concerned with my oil pressure readings from my defi gauge usually with full throttle it goes up to 8 bars but i remember i watched video of a built rb26dett and it was only reading 6 bars at full throttle i know a lot of thing changes 2jz and rb26 is not the same but 2 bar difference scares me should i go for 0w-40 or 5w-30 instead ? Thanks in advance for any helpful and useful information.

i came here to seek answers before starting a new thread, my oil pressure gauge exactly reads the same 8 bar on boost and 3-4 bar at idle im using 10w60 mobil 1 but your car is built mine is stock 2jzgte manual and im concerned is it normal or should i go for less thicker oil ?