bluecoupe46

Can all be bought direct from toyota for imo a reasonable price.

Price on the TT Autobox? Also where are you located?

For sale is my Whifbitz billet steel cam belt bracket. This was bought a few years ago and fitted to my engine. The engine has never been run since it was fitted so this is essentially brand new but has some minor marks from where the bolts were installed. These are £162 new. I'll sell for £85 including postage. Below is the information taken from the Whifbitz website: "Made in the UK using a billet of aircraft quality steel and then coated in black high temp finish. This replaces the stock cast alluminium bracket which is prone to failure especially on big power cars. We’ve had first hand experience with the stock unit shearing in half on Paul Whiffins own car resulting in 12 bent valves. This is a must on any modified engine and a great addition to any 2JZ engine."

I think they might be? fan size is 170mm in diameter with 3 mounting bolts spaced 105mm apart. If you could check for me and send me a message if you find it that would be great!

I’ve got 1 now, but if anyone has another available please pm me

No problem, thanks for the response. These are the pre-facelift not the facelift Import ones that i'm interested in. Good luck with the sale.

When you say side skirts I assume you mean the normal hockey sticks and not the full side skirts that came on JDM facelift cars? If it were the latter I’d be interested

That would be great, thanks. Like an eejit I sold mine on here a few years ago for £15

As per the title I’m looking for the stock electric fans from a turbo MKIV. These are the 2 smaller fans that fit into the stock radiator surround.

Pm’d

I know someone who was after a set, i've messaged him to message you.

Sold

No problem! If you can find it I’ll take it! Cheers!

Hi All, I'm looking for the following boot plastic as annoyingly I must've sold mine years ago so now the rear of the car is going back to nearer stock form I need them back again! Kind regards, Alex

Hi, If you’re breaking the whole car do you have these trim pieces from the boot? Regards, Alex

Bump, photos added.

Anyone of you lot own it? I’ve seen it down my road a few times, no idea if the owner lives there or is visiting.

Could you confirm whether the FCD is still available?

I’ve got these boot plastics available (in the UK) and a few other parts, no idea what they’re worth. Item 1 - storage compartment that sits below the boot carpet in the middle £65 delivered (SOLD) Item 2 - oem boot plastic (not sure what it is, part of a jack holder?) £20 Item 3 - Front ARB and Rear ARB from my 1996 RZ-S (GTE) only have photos of the rear arb atm. £90 for both including delivery (rear comes with drop links). Item 4 - GE airbox removed from a spare engine project £35 delivered I also have most of the old control arms with bushes and ball joints all in good condition.

Bump, significant price drop. Message for photos.

Sold

For sale are my Mkiv supra headlights from my 1996 import. Overall the lenses are in bad condition with scratches inside and out and hazing to the outside of both lenses. The painted inside trim inserts have bubbled up due to excess heat (another car on fire about 5ft away), but the lenses are intact (just scratched and hazed from years of being stored outside with no cover on the car and not cleaned). Rear housings are fine and the inside trim could be blasted back to bare metal and re-painted easily enough. £60 takes them both collected or £75 delivered

Selling my Grams Ridox front bumper (without undertray). Technically the bumper is new as it's never been fitted to the car properly so has never seen the road, but it's been stored outside so i'll need to give it a wipe over before it's sold. Radial crack to the gel coat by near side headlight, small crack to gel coat at the bottom of the bumper. The bumper did have a base coat of colour applied however this was never finished, unfortunately a car fire on the drive caused the base coat to blister a little on the near side (see photos) but caused no damage to the fibreglass or gel coat, just bubbled up some of the paint which would need to be sanded back prior to re-priming. Collection would be ideal as it's a big item, but I travel a fair amount for work (usually between Gloucestershire, Birmingham, and further north to Warrington so I may be able to meet enroute or deviate for a fee if it's not far from my route. Price £100

Have you got an idea of what price you want for it? Would be interested for my track car.

Which rear arms do you need, there's multiple lower arms. Depending what you are looking for I may have a used oem set available.