Sandesupra

you change the complete tunnel.. you can just cut out the top, but why not do it proper? the top builds up on manual and is flat on the auto..

22 is for the water temp sensor...

Update! put back my MBC and adjusted it below what i used to have (still wanted to know if the mod made a difference). NICE!! think i actually need to adjust the valve down;-) gave it a little tweek aswell;-) The mod has my vote!:-)

have it like 53 also. maybe i have the valvev the wrong way.. pretty sure, I double checked. it got 0,5-0,6 before.. I took of the MBC to be sure the effect of the 1st turbo mod was right. im at BPU and the actuator is a heavy duty type.. (not lower then 1-1,2bar)

Did this just now.. but didn't get the results i was hoping for.. only got 0,4 bar on first turbo.. was said just a quarter turn would do it.. whats wrong with me? lol;) have the usdm hybrids so really need to get my first turbo to boost more (its a laggy fuck!;-) the hose from the pipe went in to inlet nipple and outlet to vsv on the rearmost on the vsv.. T bar on the other.. Help;-)

Jack up the car and check the two vacuum lines from the pressure tank.. Also the lines going to the vsv's PT fail is not common.. quite rare.. check if the actuators (iacv and egcv) are working properly.. should open at about 7psi.. you can find this in the tsrm:-) happy hunting!:-) been there...

Funnyman!:D wrong ratio so not really an option...

Hi I have converted my UK-spec auto to a 6 speed. changed the diff with a jdm, so I no longer have a diff cooler.. so now my diff oil light is on.. Any way to remove this? without just removing the bulb or using black tape to cover up;) Phil

order the tunnel from your local toyota dealer:-)

the big disk cylinder thing you are reffering to is the brake cylinder. you will too take the master clutch cylinder, from the donor car. the holes are there allready Should just be a rubber plug there:-), the slave cylinder is on the box.

The part number for the 6spd sub tunnel: 58261-14010

Supra 2jzgte manual jdm engine:-)

One of you guys woulden't happen to have a Mines ecu laying around? And want to sell it to me?:-) Phil

just bin the steering wheel:-) not worth anything for a Supra owner anyway;-)

Uk spec are low impedance sidefeed. uk spec is also tt:-) no GE where produced as uk spec

So they are well used.. how old are they and have they been tested recentley?

She will be getting a stock bumper again, but the uk-spec dildoes kinda ruins the front.. B had to return it completely stock, only way to get it registered in Norway, and it will look stock apart from wheels. no gauges or anything. the hybrids look stock aswell:-) this is my 4th Supra, everytime ive sold one I feel sick..;-) Haha! yes B is a SUPRAMAN. maybe I'll have to buy one more from him then;-) if he's selling them on:-)

Hi I bought this car from B and have taken well care of her:-) here is a picture:-) She has gotten a new engine with 120k km, given a manual transmission (V160) a set of speed4sale hybrid tt kit (usdm 600+), new 19" Japan Racing JR-11 hyper black and a genuine Do luck front bumper. She will be mapped to around 500bhp and given a set of oem black leather front seats:) - - - Updated - - - Hi I bought this car from B and have taken well care of her:-) here is a picture:-) She has gotten a new engine with 120k km, given a manual transmission (V160) a set of speed4sale hybrid tt kit (usdm 600+), new 19" Japan Racing JR-11 hyper black and a genuine Do luck front bumper. She will be mapped to around 500bhp and given a set of oem black leather front seats:)

Do you still have the speedometer cluster?

Family

Cemetery

Transformers

Movie

Oh my god! what a car, what thread! Blown away!

Yes, i'm looking forward to the bpu:) Will be a good summer i think:)