Jump to content
The mkiv Supra Owners Club

walkerstrider

Club Members
 View Profile  See their activity

  • Posts

    444

  • Joined

 Content Type 

Everything posted by walkerstrider

  1. walkerstrider
    Help still needed, been to mappers today but couldn't get map done as it's seriously over fueling! Got error code 31 come up,also there's no voltage on the air flow green wire! Air flow white wire shows 3.5 volts. Any ideas? I'm at a loss!!
  2. walkerstrider
    Tickets booked!
  3. walkerstrider
    1) Shane 2) Carmel 3) Clay 4) Ripped Fear 5) Binfieldx + 1 6) JCBT + 1 (Chris) 7) Benjy 8) Timlowthian 9) Berg (+1 passenger) 10) t14ppa + 1 11) Black-widow87 12) Fastcar 13) Axl + 1 14) harleyfdmd 15) tkddav3 16) Pilchard +1 17) DaveR 18) Chan01 19) SUPRALEE46 +1 20) TrickTT +2 21) walkerstrider + 1 22) 23) 24) 25)
  4. walkerstrider
    Yeah, seems to be the problem, doesn't matter at the min. Got oil leak from return flange on sump!
  5. walkerstrider
    Cheers bud I'll try swapping them round. Irrelevant at the min, got a bloody oil leak from return flange on sump! - - - Updated - - -
  6. walkerstrider
    Car is now missing like hell, reset the timing no difference, now when I turn the car off but flick ignition back on, light on right side stays lot and the left one flashes red. Help needed please
  7. walkerstrider
    Topped fluid up, I'm now getting gears but it's still not right.
  8. walkerstrider
    Had the engine out and swapped fully working box onto donor engine for na-t build. Put it all back together finally got it running but don't seem to have drive in any gear! Will creep if revved high! What would cause this? Every thing went back together as it came out!
  9. walkerstrider
    It's started at last but still have the lights on emanage as well as engine light on dash, any ideas?
  10. walkerstrider
    I have had to change distributor, could it be anything to do with timing? I set it with rotor touching number one on cap at tdc.
  11. walkerstrider
    Can't hear anything other than a slight ticking coming from engine bay.
  12. walkerstrider
    Can't hear the fuel pump Just checked. I'll have to check earth's in the morning as it's too dark now. - - - Updated - - - It's a standard fuel pump
  13. walkerstrider
    I do have an alarm and immobiliser fitted, don't think I'm getting fuel pump sound, what should I be listening for? It will turn over too but won't start.
  14. walkerstrider
    Just finishing off my na-t build, wired up the emanage blue as per instructions but when I turn the ignition on the left light flashes constantly and the right light stays on. Can't seem to find any info on what the cause is. Any ideas??
  15. walkerstrider
    Sorted, must of been loose connection somewhere, all working now. Cheers.
  16. walkerstrider
    Also have power to ecu ig fuse but not to ecu b fuse. And no engine light when ignition is on.
  17. walkerstrider
    Anyone, getting desperate!
  18. walkerstrider
    Both bud, no power to +b on ecu block.
  19. walkerstrider
    Just done an engine swap on a 94 na, gone to wire up emanage only to find no power! Checked efi fuse and ignition fuse, have power to both. All interior lights etc come on when ignition is on. Any ideas??
  20. walkerstrider
    No way! This is a nice supra! Glws bud.
  21. walkerstrider
    Cheers Chris, I redid mine, no oozing on the inside! Just a tiny bit in the outside. I also cleaned all the old sealant out of all bolt holes blind or otherwise. Cheers again for the heads up, most appreciated!
  22. walkerstrider
    Welcome to the club bud.
  23. walkerstrider

    NA-T vs TT

    walkerstrider replied to a topic in Supra Chat

    Good luck finding a UK tt bud, I'd start looking now.
  24. walkerstrider
    If resale value is that much different, you can always remove the kit and sell it as an na.
  25. walkerstrider
    Same one I ordered bud. I'm having the same issues as Chico. Glwb.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.