EVLMKIV

Paul I'm in the U.S. will shipping always cost me an arm and a leg lol

CURRENT SET UP Turbo: 70mm Master Power DBB Cams: Stock cams Stock block and head 1000cc RC injectors added Boost: 18 psi Tune: Alexis @ Detroit Racing 580 rwhp 593 torque on Dyno Jet with pump gas ECU: AEM Series 2 Tran: 5 speed OS Giken triple disk New set up after my return will be posted. All items have been purchased

I'm going with the front and rear bumpers. No side skirts or should I (Huummmm)

Awesome j_jza80 I just looked it up on google and boom!! there it was. Thanks brother!!

Good Point;)

I wanna say that aside from the curves at the bottom it looks close to stock, but the openings are slightly wider. I have been searching the net, but have not come across this one. I'm thinking with some of the custom work done to this car, it could be anything. Long story short I am looking to go this direction with mine. At the most it will be the rear bumper, but I'm not sure how much modding will be needed to fit a TRIAL bumper, but I do know that they are pricy...

Thanks Abz I should have done that.

I was looking around the craigslist miami and found that same car that I had posted here months ago asking about the wing and rear bumpers. Well to my surprise it's currently for sale for 22000 USD. I found through the add that the wing was little more than an OEM wing cut down and molded into the hatch. Looks pretty sharp, I also learned that the rear bumper was indeed the TRIAL with diffuser, but or course I was also told this by a few members as well. Front bumper seems to be a mystery to even the seller as he purchased the car 10 years ago with the bumper installed. Here is the add if anyone would like to take a peek... http://miami.craigslist.org/pbc/cto/4088178293.html EVLMKIV

E's car fits the bill, but as everyone has stated those headlight covers must go. Overall he has my vote. T's car is sharp as well.

Welcome Murf.. Congrats on your first Supra she's a beaut, but i would imagine you have plans brewing in your head right now as to what you will be doing with it. Looks good brother. Stay safe.. EVL

Thanks MattP, Nic is looking into it as well for me. EVL

I sure hope so Ben...

[COOL][/COOL]Welcome

Well MattP can I get some unorthodox cam gears from you lol???? Sounds like you're the guy to trust.

Alright I have baited this guy and he has responded to an add of mine. He is going by the PayPal name of [email protected] this time. As culllcfc in my wanted thread has pointed out in his reply this guy wants the money as a gift to avoid fees. PayPal gift will not give you a claim if you are scammed due to it being a gift and the fear of being double tapped. The IP addresses are as follows for anyone wishing to pursue this deeper wich I too am doing. First IP is in Mountain view CA USA 209.85.214.194 The second IP is a company called GIGLINX it to is south of Mountain view which must be where this dildo works 63.141.204.195 This dude is still using the name David Shelley so steer clear guys. I hate to to lose money and I would ate for anyone else to lose money too. Take this info and run with it. EVLMKIV

Thanks nic I'm working it right now.

Thanks abtin, I too have the Q45 on the GREDDY but have noticed that thread adjustment of my cable is quite tight. I'll set up to go with this one. EVLMKIV

Perhaps the new flow rating has indeed clogged the fuel filter. There is also a small gasket in the afpr that will go bad is over psi is experianced. Mine was acting strange onec. So I took it apart and found that that gasket was bad. I ordered one dropped it in and bamm!!! good to go... I hope this helps. Oh and my filter had extra crap in it due to the fuel that is was getting from the 255.

Sharp looking ride. Is the St205 throttle cable standard or will this fit my Greddy intake left seat drive supra? I'm looking for a cleaner look. I have the stock one on right now, but it's ran over top of the intake kind of looking getto

Nice ride.. It looks very clean.. What are your power plans for it? Welcome by the way. Yes indeed 190 would seem like a punch bug compaired to your new beast. Let the addiction begin.

Nick If the polish doesn't workas good as you would like then this would be a better idea of course judging by the looks ok it. Nice covers DNK..

There is some awesome stuff called Metal Gloss. It comes in two bottles and stinks like hell but goes a hell of a long way. It's 27 USD bottle set on ebay. I'm not sure what it would be for your currency. All you have to do is lightly rub and your cam covers will turn out emaculate. Without elbo grease of any scuffing pads steel wool or anything. It works flawlessly. http://www.master-formula.com/car_polish.htm

Well fellas I guess I'll be the first to say that I fell into the hole via my UR cam gears wanted thread. This guy answered and due to him being on the forum I failed to question much. Took me for 350 USD, I have a friend in the Indiana State Patrol who is lookinn into this guy right now. I will keep everyone posted. I hope they beat the hell out of him. My bank is paying my money back though which is great. I got dooped, but it wont happen again. If anyone wants this guys full info just visit my Cam gears wanted thread and it's all there. I'm sure that there are a couple of upset members who will send a few emails for this guy trying to muggle up our forum. Jonathan

Might be due to how soft they are. I didn't have that issue on the 740 but my friend did on his mustang. Seems normal I guess

http://www.ebay.com/sch/i.html?_trksid=p2050601.m570.l1313&_nkw=fuel+cooler&_sacat=0&_from=R40 Found this fuel cooling items on ebay. It seems that there are more than a few ways to cool the fuel. I have an MQ-1C drone liquid to liquid cooler that I will be modding to go on my car. Any cooling of oil or fuel seems to work wanders acording to this thread. Thanks for the info. Seems like NOS without the spray.