chris0132

So these need blanking and then I just connect it to the last 2 pipes one on the wastegate and one on the turbo pressure one then the other to the plenum

http://www.mkivsupra.net/vbb/showthread.php?296003-Boost-Controller-install-(again)&highlight=boost+controller+pipes right almost got it now I think the link for this mentions about blanking the pipes from the vsv one what's the vsv and do I defo need to blank them and any pipe I blank do I need to cap off

So I don't have to blank anything off? And what pipes on this diagram is it number 13 and 2 then and then the other I need a t piece on the plenum and that it's then?

So all the people on here with bpu supras and no one has a picture of the boost controller fitted pipe wise can somebody please take one for me if I see it ill be able to fit it easily but the instructions confuse the crap out of Me

INTERNAL WASTEGATE (SINGLE PORT ACTUATOR) INSTALLATION INSTRUCTIONS

 Port #1- Connect to an uninterrupted intake manifold pressure source after the throttle body such as a compressor bypass signal line using the 4mm hose. · Do not connect port #1 to the line that operates the fuel pressure regulator unless the supplemental instructions tell you to do so. · This hose should be as short as possible and should not exceed 100cm (3’4”). · Install the 4mm vacuum filter within 10cm(3.9”) of port #1 on the EVC stepping motor. Port #2- Connect to a source of pressurized air such as a turbocharger compressor housing (discharge side) or compressor outlet pipe (before the intercooler) using the 6mm hose. · This hose should be as short as possible and should not exceed 100cm (3’4”). · Install the 6mm vacuum filter within 10cm (3.9”) of port #2 on the EVC stepping motor. Port #3- Connect to the port on the wastegate actuator. · This hose should be as short as possible and should not exceed 100cm Swampy sent me this but I'm still confused lol

Can someone show me some pictures of where the 3 pipes off the boost controller solenoid go I've got written down where they go but I'm not exactly the smartest pictures always help I found the how to on here but it mentioned something that confused me a little lol, so all I need is a picture of each pipe and where each one goes onto I apologise for my stupidity haha

I still think im going to do the wheels silver tomorrow to help the sale mind And the oil leaks are minor ones that if you was to service the car would be fixed straight away when you change the oil filter and drain the oil so would be a cheap fix same with the gearbox sump plug as it's just the copper washer so if you was to change the fluid in that again it would be a very cheap fix And the valve stem seals the car doesn't always smoke on start up so it's not something that needs doing asap as it's not that bad

False alarm just another time waster it's going on ebay tomorrow

Just had a phone call will find out tomorrow so fingers crossed

So no amazing offers on ebay best genuine was £5k but I could get more by fixing some of the faults and painting the wheels so looks like a busy week is ahead woo can't wait ...... not lol

It's stupid though as it says it will compete against the nsx with 400bhp as far as I'm aware the rival has always been the gtr so why not make it compete with that like it's always been plus the concept looks shocking imo

Just silver was thinking black I think colour coded would look a bit too much gunmetal the new owner can change them to there preference I'm either fixing the valve stem seals or selling it as is but taxing it for £6k but ill just see what bites I get first I've got 48 watchers on ebay at the moment with over 4000 views I'll see what another week brings when the wheels are silver then if I hear nothing ill sort the valve stem seals I've just found in the bag I got with the car when I brought it some new coil pack connectors so ill be changing them as well as the VSS seals and cam seal and rocker seals

Finally done a for sale ad and doing the wheels silver this week to help the sale :-)

Looks like if my supra sells before I won't make the dyno but ill more than likely come down still

Thanks mate yours doesn't look to shabby ;-)

Looks like I'll be asking for a little bit of help then rich ;-) I'm going to get a na 5 speed aero next winter when I have cash spare to go na-t and build it up from the ground up so it's ready for the shows of 2015 until then ill get a car I can use a tow car for when I need it

Finally sorted my account right ill get some better pics taken tomorrow and get a for sale ad up on here I'm going to see how it goes on ebay this week and if I don't get anything I'll repaint the wheels silver and spend the week doing the vss's so it'll have new plugs a coolant flush and will be running bpu so should be worth the money

And thanks for saying my car looks shite really nice to know that people like people being different

Yep it's mine I haven't put it on here yet because I only put it on eBay last night nothing dodgy at all I knew people would slate it too There's nothing dodgy about selling a car that I don't use enough to justify keeping I do 5 miles a day and it's sat on the drive all the other time so is unfair to keep it

1. Supra_Scott 2. fly - Dyno/AFR/Boost 3. chris0132 - Feb dyno run as I'll finally be bpu woo 4. Noz - Feb 5. p1RATE - Feb 6.Justin Bieber - dyno run with afr and boost 7. Rob_SRi - spectating 8. Buster.... If cars ready fingers crossed 9. adam1983 - Dyno with afr/boost 10. Rich - Spectating unless I've finished tinkering 11.pulley-dyno run baby yeah (either with built engine or current one) 12. Berg 13.black_widow87 14. scotty71 - dyno run to blow out the winter cobwebs 15. Tsia - Feb 16. Jord - Feb - Dyno Run 17. Supra UFO - Dyno (weather dependant

I was going to re do my supe red and the nicest I found imo was the new flame red on the clio it looks the closest to candy red I've seen but is just a metallic, but now I'm going a different colour

Mine does it all the time and is the valve stem oil seals they cost about £70 for the parts then the job is not a fun job lol

Rob Mitchell's one deserves a feature is beautiful

they look stunning love the red barrel inside against the black, can't wait to see the car finished, I have thought about popping down to the shop to have a cheeky snoop haha (if its there that is) as I'm only about 10 mins away

2) fly - feb 3) chris0132 - Feb - dyno run (might aswell ay )