scott87

What pattern is on the seats as mine are a little worn.

Also with the mini cam breather. Should I attach it directly to the plastic bit on the cam or to the hose and tuck it away?

Also par access obviously, will there be any effect on the efficiency of the cooling system by having the expansion bottle lower down?

Made a start on the conversion today. Chopped the sections of the car where the intercooler piping is going, fitted the fmic and fitted the induction kit. Had to fit this as non turbo setup as drilling the oil pan didnt happen today and need to use the car until it does. Came along nicely and should be converted very soon. Some pics to keep you all happy

I like them too. But bet they don't look half as good or like bbs in real life!

It was kind of a joke post. Possibly should have put it in that section

Ok so the wheels i want turn out to be uber rare and very very expensive. Has anyone seen these and are they suitable? http://www.ebay.co.uk/itm/18-ALLOY-WHEELS-TOYOTA-SUPRA-LEXUS-SOARER-GS300-LS400-LS430-SC300-MAZDA-RX7-RX8-/400639917462?pt=UK_CarParts_Acc_Wheels_tyres_Trims_Car_Rims_ET&fits=Car+Make%3AToyota%7CModel%3ASupra&hash=item5d47fffd96

Cool so i just need one of these then for the cam breather. What size is the cam breather anyone? 18mm i guess http://www.ebay.co.uk/itm/Mini-Oil-Breather-Air-Filter-Fuel-Universal-Small-Chrome-Add-Hose-Joiner-/290677442170?pt=UK_Home_Garden_Hearing_Cooling_Air&var=&hash=item43adb9c67a

Spot on thanks that's what I was after

Anyone?

Ok so there is the large breather from te can cover, the air temp sensor. Then a small breather from the power steering. These are the 3 connections that go to the air intake.

No the rear breather driver side is connected to the inlet normally. Then there is another one from the the front of the engine to the left by the timing belt cover that goes to the inlet too. So there are 3 connections to the inlet including the sensor.

Spot on thanks

What size did u use for the one u had? The one at the front is the same same as all the small breathers around the intake. It's more the large one at the back of the engine too can cover I'm not sure on size. I can measure them. Just wanted to order now and it's raining outside

Does anyone know what size i need? There is the one larger pipe that connects to the rear of the top of the cam cover and the smaller one that comes from the front of the engine by the cambelt cover.

Ah that's good. I was expecting them to have some serious twat tax added.

Yer that's the ones Cool thanks. Are any little filters ok or should I buy branded ones?

I'm fitting my intake. I have the space on my intake for the sensor. But what do I do with the 2 breather pipes?

Its very possible. I popped up a post the other day asking who i had or had planned to gets parts from as i had a mad couple of months and lost track. pm me if you like

Let me check my pennies Which suspension. I've lost track of parts I'm buying as bought so much!

Also wondering if anyone can help me out with a induction question. On the na there are the 2 breather pipes and one sensor. I have a space for the sensor in the intake pipe, but should i also do the same for the breather pipes or purchase small filters to place on the ends of them\?

Ive been told by a few people that the subframe just needs to be loostened and then the sump can be 'slid' out. If this is not the case i will revert to my original plane of having the sump i have drilled.

I am considering buying a tt sump rather than drilling mine, but am still left with the issue of needing assistance changing the sumps over as i dont have a drive, i'd imagine we could do the work on my road as it is far less of a job than drilling the sump however. Basically looking for someone to come and lend a hand, bring some spare tools, i do have quite a few. Also got jacks, axle stands, old-school metal drive on ramp things. Anyone that could help that would be great. Looking to do the work asap as i need to get an na part off my car and posted out to another member. Thanks

Any rough idea on price?

Have you got a body shop, where abouts in the west mids are you? Awesome looking car!