rallly

Will a UK spec hanger fit the j-spec ?

When through bpu upgrades do you add the colder plugs?

Ya I just hope I don't break that grommet and send chunks into the valvetrain. I broke it before when I had the covers off to do the valve cover gaskets. Bitch to pull the PCV off.

So leave the pcv in the motor and send air through it? It shouldn't allow air right?

Hey Alex, I know this.thread is very old but I too just installed an HKS ssqv bov ver2 where the stocker used to be and I can see oil spraying on the intake pipe hose with every ppsssshhhhhhhh. Now I have seen the residue on the OEM bov and in the hoses but never thought it would shoot out like this. I get no smoke out the tail pipe, no excessive oil consumption... I have a catch can on order and hope this solves the issue. Can you point me in the right direction of how to install the 2 catch can lines? Car is a 93 JDM Supra tt and stock. Thanks Alex!

How can I check if it's sticking? That was a BITCH to take out when I did my valve cover gaskets..

Hey guys, I own a stock J-spec 93TT Supra with 110k on the odo. I just installed a Supra specific HKS BOV where the OEM one was and there seems a bit of oil spray coming out from the front of it. It is setup to vent to the atmosphere as my car is MAP. The car seems to run fine., My stock twins seem healthy, don't see any puffs of smoke, I don't lose any oil after spirited driving and don't smell oil.. I just know there is oil residue in the intake pipes and ic pipe . There was some at the OEM bov pipes and bov itself. Would it be a good idea for me to install an oil catch can or breather filter at the valve cover?? I don't know much about this and I did do some searching with no definite answer. Just don't wanna buy stuff that won't fix it.

Bumpp

Cool, thank you. Oh, one more thing. What size rr do I need to be at 1bar?

I'm sorry Mario, just not reading it right.. does it matter how I wire it in conjunction to the Greddy SLC? Red wire = 12v Black wire = ground Green = what JDM ECU Pin out?? White = what pin out #??

Is it made of gasket material? If the re is metal won't the exhaust leak?

Do you have a link to the aeromotive fuel pump?

That's my plan! ^^^ Does it come with the gaskets with the rr?

How do feel about the pipe man? Did you get it on yet? I'm looking to get one but not certain which to get?. Gonna have the autobahn88 dp and an apexi RS evolution exhaust (3.5" with restrictor ring). Would this pipe work for me to go BPU?

Glad to hear I have a very good quality exhaust:) What do they mean for pipe diameter (85mm- 95mm)? Is it tapered ?

Thanks a bunch guy's! Now I gotta figure out what dp, and mp to use as they are stock still. Best BPU setup is the goal.

Also, how do I install this if there's a Greddy speed cut spliced into the ecu also?

Pic's are up, do you have any idea's?

I would but shipping cost will KILL my bank lol.

Would this be a good exhaust setup for my 93 JDM Supra TT? Also will it bolt up? Autobahn88 3" dp, blitz 3" mp, into an Apexi RS JASMA 3 or 3.5"(not sure what it is) cat back. I plan to go BPU.

Thanks for the info guy's! Gonna get myself an Autobahn 1st decat then.

What mates to the autobahn88 dp?

What about HKS, RMM, Greddy, Tanabe etc?

Here are the pic's guy's, if anyone can tell me info about it that would he great. http://img225.imageshack.us/img225/6531/imag0102p.jpg http://img10.imageshack.us/img10/2052/imag0101ey.jpg http://img687.imageshack.us/img687/2769/imag0103sf.jpg http://img543.imageshack.us/img543/5292/imag0104og.jpg http://img32.imageshack.us/img32/8133/imag0105ea.jpg http://img607.imageshack.us/img607/6189/imag0106z.jpg

Will do that for you guys in a bit