Gaz B
-
Posts
148 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Gaz B
-
Hey all. I've just had a new stock Toyota clutch fitted and now the slave cylinder squeaks like mad! When I have the lightest pressure on the clutch pedal, it stops. Same of I have more than 50% power going through. I've been told its the thrust bearing. Any advances on this and possible solutions are welcome. Thanks all
-
http://www.performancealloys.com/wheel-details.aspx?ID=1697
-
stock suspension no coilovers, tyre sizes 235 possibly.... recommendation, any ideas for a 19" alloy? cheers
-
Will 19 x 10 inch rota gtr white alloys fit on a 94 jap import mkiv supra?
-
Yeah it is abit orange to say the least! Deniros, Where was that then? probably was as Ive never seen another Orange one apart from mine!
-
So I was out in my MkIV and spotted a nice looking blue Supra pulling out of a junction on the A11 by the roundabout for Mildenhall/Honington. Very well maintained.
-
Hey, Is it worth replacing the flywheel on a non turbo 2jz? Clutch is almost gone, 65k miles on clock. What do we think?
-
Ive noticed that the pedal is come really high in a short period of time. Sneaky suspicion that its just knackered.
-
Deffinately within the gearbox
-
I've had another go in it. Feels like the handbrake is sticking but everytime after its fine. I think the clutch plate and flywheel may be good shout. If I pull away with a few more rom it does seem to clear it.its a manual box by the way. I will check the rear calibers as well just to cover all the bases.
-
On initial pillow away in 1st, theres a judder from either the gearbox or the n/s rear wheel. Abit vague but I'm still trying to determine what it is. Any suggestions are welcome.
-
Yeah I see my mistake! Fingers to quick on the iphone! Cheers guys. I'll look around for a panel fit
-
hey guys. I'm looking for a suitable performance air filter to replace my current stock one on my non turbo 1994 RZ. Any suggestions? Ive looked about and blitz seems to be a good fit on it. Thanks
-
Cheers guys Deffinatly putting oil back in!
-
Hey guys. I'm going to do an oil change but Id like to know what's the best stuff to put back in and also, is there and additive I could put in to clean the system out. Thanks
-
Thanks guys. Ive seen the prices and it seem to be around the £360 mark. Its the outer bush. Failed MOT because of it today Whifbitz is the only place I can find the piece I need. Is there anywhere else I can try that could be cheaper? Thanks
-
Hey guys and girls, This probably been answered already somewhere.. My N/S rear upper radius/wishbone arm has its bushes worn out. Ive been advised that its much easier to replace the entire wishbone part because its very difficult to replace the bushes on their own. There is a bit of play in the ball joint but not anything major to affect the car. Any suggestions are welcome Thanks Gaz B
