Lacee

Hoops i forget we put on my HKS muffler and made the exhaust system to 3" SS from the cat back this is how it looks, it will all the was 3" as i put on the turbo.. this is my JZA80 in my frined's shop how made exhaust systems, cooler pipe...you can see my old car also the MA70 with 1JZ.

Hi there, bad to hear this, 'cause i'm now making my Supra with the W58. And would like to have around 550BHP. But what if i can make it dog box (straight cut)? We can also make it from the R154 or the W58, any ratio you would like. I think i will do it with my 2nd W58.

Sure, but i have a lot of work in the shop so don't have to much time to take care with my Supra, but i was in England to pick up some parts for the car. First is a manual conversion kit from m_life (thanks Martin). I'm still waiting for my JIC Magic coils, and looking for a set of rims (rota grid in 18x9.5 et20) these are from England some interiors panel and a dash W58 and all that need for the conversion, i hope it will not broke immediately, if yes i will go with a dog box made from the W58. I will keep on update as i able to work on the car. I have also ordered a spec stage5 clutch and a koyo rad for the car...

Nothing much happend this week, just got a few parts, and drilled the hole for the oil return AN-10 fitting on the upper N/A pan. Put on DriftMonkey stickers on the car the hole for the oil return the Aeromotive fuel pump, i will use 2 of them and Sickspeed wheel nuts the clevite77 bearings, and a new water neck DriftMonkey That's all now, at the next week i hope my bottom end will back from the machine shop, and i can travel to England to pick up a manual conversion and maybe a set of coil over

Okay, today not much happend, i borrow a bottom end from my friend, had taken apart and took in to the machine shop, to hone, deck the head surface, clean, get new rings. Got a set of bearings(clevite 77). the bottom end a turbo and an N/A piston at next week the bottom end will be back from the machine shop.

usefull info but gonna use 2jz gasket, i think

Look what i have found: this was my A70 with 1JZ, with T4 60-1, had 507HP and 700Nm. Here is the video:

i'm gonna run a GT35 or a GT40, with a bit high comp. around 9.2-9.5 with E85

Thanks sir

reposted in Supra Chat, please remove it. Thanks

Hi all, Runing a shop here in Hungary and build Toyotas(Celicas,Supras) for 12years, now decided to make a thread for the build up. With a lot of experience with 1JZ and 2JZ engines, now try to build up a "low" cost, high HP engine for the A80 Supra. The car itself is a white auto. JZA80, with 2JZ-GE engine Japan import. I would like to finish the car at the end of January, with: -1.5JZ engine -VEMS stand alone -conversion to manual -suspension upgrade -brake upgrade -restore the the whole car (exterior, interior) The first couple of week i will collect the parts.. i think that's all now. Post a few pics of the first parts tha arrived to the shop. the car itself waterpump, injectors(1000cc RC), WG (60mm XS power), manual trans cover RC 1000cc stock TT front brake disc for BBK project and rear pads. I hope you all will enjoy the thread, and understand my bad english

Hi all, Runing a shop here in Hungary and build Toyotas(Celicas,Supras) for 12years, now decided to make a thread for the build up. With a lot of experience with 1JZ and 2JZ engines, now try to build up a "low" cost, high HP engine for the A80 Supra. The car itself is a white auto. JZA80, with 2JZ-GE engine Japan import. I would like to finish the car at the end of January, with: -1.5JZ engine -VEMS stand alone -conversion to manual -suspension upgrade -brake upgrade -restore the the whole car (exterior, interior) The first couple of week i will collect the parts.. i think that's all now. Post a few pics of the first parts tha arrived to the shop. the car itself , waterpump, injectors(1000cc RC), WG (60mm XS power), manual trans cover RC 1000cc stock TT front brake disc for BBK project and rear pads. I hope you all will enjoy the thread, and understand my bad english

Here are the supras the A70 i had, with the 1jz engine and over 500bhp, and the A80 from japan that will have 1.5JZ soon.

I will upload pictures, soon, I had a MA70 with 1jz engine, will upload pictures of the build, too.

Hello for all. I'm from Hungary, i have a JDM JZA80 N/A, automatic. will build with turbo engine and manual trans. Runing a shop here in hungary, and working on supras, celicas, mr2s for 11 years. Will make a build up thread, if interested.