ashbuster

but is it a one off lol far from it cant see where it says what gearbox it has, my guessing is that its a w58

http://www.ebay.co.uk/itm/TOYOTA-SUPRA-3-0-TWIN-TURBO-93-5-SPEED-MANUAL-ONE-OFF-MATT-GREY-/271166490665?pt=Automobiles_UK&hash=item3f22c84829 :blink:

yeah nice and cheap. do you have powerflex bushes?

lol i dont have the mould mate, i cut out the part of the bumper and sent it to rippedfear to use as a mould so without that i cant make any more

thanks guys not bad for a tenner

had these come through in the post today, im guessing they are supposed to be cut along the bottom to fit over the arb? just making sure

this thread is making me want to hurry up and make mine lol ill have to order some resin now

to be honest its stupid really because the company i worked for was silflex we made the hoses and then added the logo (samco) to the pipe then it gets wrapped in thin tape before it gets heated. the tape is then removed and the logo is then in the pipe. and they were sent to wales we also did some pipes that had a different logo? but made at the same place how weird is that?

rippedfear was going to do some but he had alot of problems with his car and he was really busy. im not too sure if he will be doing them now but worth asking guys? here is the original thread http://www.mkivsupra.net/vbb/showthread.php?265243-Gauging-Interest-on-a-potential-GroupBuy-Carbon-Fibre-Exhaust-surround if hes not going to be able to do them then maybe stevo would be your best bet for making them? because i dont think wrap would take the heat i have one half made in my shed i still need to finish it

nice ideas bud, looking forward to seeing another project

i thought it was fresh too :O

very nice, i used to make those hoses and the other samco hoses, these have a metal wire going through them and there is a nack to cutting them straight and perfect that will also make easier access to the rear of the cam covers ect...

it was rippedfear mate

really struggling to fine a sunstrip that will go with my car

hey add do you find it a pain in the arse at the petrol stations , abit tight to put fuel in?

thankyou, the spoiler wasnt from whifbitz tho it was on my boot when i bought the boot. everything else was tho. i havent been pulled once yet and ive been driving around with my front plate in my window, police have seen and havent stopped me. it wont stay there tho ill be fitting a motorised bracket under the splitter so it can pop out and up if needed

all from whifbitz bud

carbon looks real good on a white car ! look at add haywoods white ridox supra

it might be a similar solenoid to mine and only 2 are used and one is a bleeder, double check tho to be sure or maybe one goes to your boost controller or gauge had a little look for you and it looks like it goes to where you normally tap into to plumb a boost gauge in the HKS solenoid is marked B = 1 is another reference for the boost controller from the plenum. I = 2 which goes to pressure reference source/turbo. O = 3 which goes to the actuator. there are two ports on this, one of which must be blocked off. any probs look here mate http://www.mkivsupra.net/vbb/showthread.php?114088-Help-Installing-HKS-EVC-5/page3

dibs on next door handles

no mate im now in gloucestershire, horrible boring place . its like living in emmerdale mate

i cant mate its 150 mile away from where i am now sorry

seems to look like it goes well i think its because its a light coloured gold

lol they have uploaded sideways not sure why car is filthy, excuse the nasty lights, they will be in the bin soon

yeah i will be having gold wheels mate and ive tried the intercooler pipe up against the car ill just try and get the pik sent to the laptop. im not a fan of green to be honest. i did think to do it black but alot of people use black