DJT88

Tickets bought!

Yeah, can't wait!

Group shot (Burna was having his breakfast) spot the differences Full res link pic 1 Full res link pic 2

Is there going to be a Pics thread

Tickets purchased!

The area around the Ring has some great driving roads as well. Nice scenery!

Waiting on tickets without Eurotunnel. Should come after the regular tickets have gone Can't wait for another Dragonball!!!

Just finished editing a video of my footage.

That was me with you and Abz through Amsterdam! It was a little crowded to say the least I too had an awesome time again on my 3rd Full dragonball! Can't wait for the German Autobahn next year Thanks to all involved in organizing and the rest of you for being part of it!

Do we have TomTom Route files yet?

Do you get the parts with it that connect the shifter? As in this one? edit: also, do you know the history of the box?

Excellent looking kit, this would be my option if I ever change from stock!

Thanks guys! just thought I'd document this as it might be something worth doing when you've changed from headlights without this option to ones that do.

Hi fellow Supra fans. So I swapped my jspec pre-FL headlight units a few years ago. And the EU-spec lights have got electric motors for the beam adjustment. But as my car originally didn’t come with this option I was missing all the wiring and the adjustment button on the dashboard. I thought it was a shame to not be able to use this function in the car, so I went along and retrofitted this. Originally this button will be on the dash if you have this originally. I didn’t have this so bought my own button which you’ll see later. https://dl.dropboxusercontent.com/u/3472574/BeamAdjustment/%24_57 (1).JPG First of all I cut the original connectors of the head light units. https://dl.dropboxusercontent.com/u/3472574/BeamAdjustment/IMG_3794 (Medium).JPG And replaced them with my own. https://dl.dropboxusercontent.com/u/3472574/BeamAdjustment/IMG_3795 (Medium).JPG Next I ran all the wiring for it as hidden as possible through the fender and through the firewall https://dl.dropboxusercontent.com/u/3472574/BeamAdjustment/IMG_3797 (Medium).JPG https://dl.dropboxusercontent.com/u/3472574/BeamAdjustment/IMG_3799 (Medium).JPG Then had to drill a hole for the button on the dash and fit that with connectors so the panel can stil be easily removed. Note that i've fitted the red (12V) wire with a fuse connector. I've yet to calculate what would be an appropriate fuse, but for now its an 8A that came with the fuse-holder. I'd recommend putting in something much smaller (like 0,5 or 1 Amp fuse). I'm sure the electric motors don't use alot of power. https://dl.dropboxusercontent.com/u/3472574/BeamAdjustment/IMG_3801 (Medium).JPG https://dl.dropboxusercontent.com/u/3472574/BeamAdjustment/IMG_3802 (Medium).JPG https://dl.dropboxusercontent.com/u/3472574/BeamAdjustment/IMG_3803 (Medium).JPG This is the result at the head light unit. https://dl.dropboxusercontent.com/u/3472574/BeamAdjustment/IMG_3806 (Medium).JPG Here is a quick clip of the system operated. This is the schedule I found online, for if anyone else wants a go at it. For a 12v/GND source I’ve used the 12V input of the dash dimmer switch which is right there in the same dashboard panel anyway.

Clothing sorted! Note: If you're outside of the UK you can't register through the link above. It only allows UK addresses. However if you contact them they will ship it to you. (In my case the Netherlands) Just had to make the payment via credit card by calling them.