sweettom

In Germany there was the best so COoOl high ways:D

BEst of luck! And enjoy the ride First i had a flimsy 1400 mile longtrip back to HUngary.

Hey guys, Somebody knows type of this wheel: http://kepfeltoltes.hu/thumb/120518/DSCF8297_www.kepfeltoltes.hu_.jpg Is that original or only replica? Name : FUZI P.A. http://kepfeltoltes.hu/thumb/120518/DSCF8291_www.kepfeltoltes.hu_.jpg Size: 18" 8 1/2 Made in Japan!

Hi! It would be an important question. I have a orginal speedometer (180mph) in my supra and planing a long time to replace with a other speedometer. with this ==> http://kepfeltoltes.hu/thumb/120517/DSCF8282_www.kepfeltoltes.hu_.jpg The question is that: i can replace just simple the complete KMPH with the original MPH , or replace only the original dish(MPH) , or more complicated? Thanks for help!

or use this idea with a wire behind of it, http://www.rallybeater.com/thewhitecar/images/gauges8_small.jpg This shouldn`t scratch the dish and apply equal force to the needle

That's a good guide from here: http://www.supraforums.com/forum/showthread.php?319961-TRD-320-km-h In order to have the TRD 320KM/H Speedo working into the USDM/EURO/GENERAL WORLD LHD supra you will need to switch the gauge face only (AKA gauge dish, dish) 1)Take out your old Speedo out from the cluster. 1) Move the orange needle to the 120 km/h mark, (that’s 12 o’clock position) 3) Try Loosen the dish by taking up in both SIDES - and SIDES only (lifting up Gently left and right sides of Dish)- take extra care or u will break the needle. 4) When you got the dish loosened from the glue, TURN the dish AND needle TOGETHER 2 COMPLETE rounds ANTI clock wise ( I don`t understand why the dish need to be moved, is it because the rest needle is built into it???, if so I will get clarified) - to take the spring preload off the needle – then AGAIN keep the needle at "120KM/H (12 o-clock position)" holding IT (the needle) up from its "SIDES" (30 and 210 km/h) 5) Make sure the the dish is at the "correct" position BUT turned 2 rounds anticlock wise 6) Notice (make a mark) where the 120 and 300 km/h marks of your MPH speedo are positioned. 7) Hold the Speedo horizontal to see where the needle rest (this is the exact centre of the spring power)- needle wont turn either directions if its perfectly horizontal and without spring preload on it. 8) Notice and MARK THAT NEEDLE point onto the DISH (mine was at 270 km/h) set a reference in the white plastic surrounding area or take a digital pic of its position with good visual reference points. 9) Now take off the needle using the tool above or the shoes wires pulling equal from both sides, some others would use two spoons, works like a couple tiny pry bars from each side, use a paper bellow so you won’t scratch the surface with the forced applied by the forks or spoons on the dish. 10) Now you can take off the old dish - LEAVING the glue on the speedo - that is going to be the only thing holding the new TRD 320KM/H dish 11)Now - in the same way as described above (if you want to keep the trd mechanism/spring preload working and accurate) - take off the TRD dish from the TRD Speedo you just bought - that is the only thing you will use ..., but …if you don`t mind, and want to save some time, remove the needle carefully WITHOUT turning it first and then lift the disch carefully. 12)To have the TRD dish fit your cluster, you need to cut off all the fix points so it becomes completely circular - actually very close the black area of the dish , don`t worry, the glue will keep it in place. 13) Put the TRD 320KM/H speedo dish back in your mechanism - but DO NOT make it stick HARD to the glue - just slightly "resting" on the glue is OK by now... 14) Rest the TRD in the exact same place as the original dish - using the 120 and 300 km/h mark you made on step 6. 15) Now put back the needle at the same reading where it "rested" prior to taking it off (Remember that MY MARK WAS AT 270KM/H, remember yours). 16) Now turn the needle to the 120 km/h mark (you can only turn it anti clock wise up to 120) and lift the sides (30 and 210 km/h) turn the dish and the needle TOGETHER 2 rounds clockwise to preload the needle again). 17) CHECK TRD Dish positioning again dish using the 120km/h-300km/h marks. 18) NOW make it stick FIRM to the glue and make sure the glue is working good - holding the dish firm ! 19)Make sure the needle moves freely up and down from rest needle point. 20) Make sure the dish is centred. 21) Put the cluster back on to a final road test. Good luck

iiiit's nice shape like the real! LHD or RHD?

HI! I'ld have a "off topic" question may be u can help in this. One of day contacted me by a international recruitment company that a job might be interested for me. The company is looking for a DWH developer for one of the leading online gaming companies based in Gibraltar. The name of the Gibraltar's company is this: VictorChandler Here is his history: http://www.betvictor.com/sports/en/content/about-us That's would be a promising opportunity thus i was already thinking a lot of on this. The second interview will be now on friday in phone. I'm very curious your opinion. May be somebody know this company or this place(Giblaltar), because i haven't the faintest idea what kind of place may be.

HI everybody! Here is already slowly the spring, and to must any modification again. So i thought, i have a turbosmart FCD-2 http://kepfeltoltes.hu/thumb/120228/TS-0303-1002-2_www.kepfeltoltes.hu_.jpg that gathers dust there in the cupboard, and here is the time to present my car with a new device. My question would be that sy could help for me in the install? This may be a stupid question, but im very concerned for this: I've already read lot of description, but i can't to decide how will change the consumption of the car? Thank you for your help!!!

Under the tree was a little gift also that I got from my girlfriend [ATTACH=CONFIG]143626[/ATTACH] LOL

HI guys! I wanted to post this Christmas card, but it was behind few days ago. [GRIN][/GRIN] [ATTACH=CONFIG]143623[/ATTACH] It was too much visitation by the relatives. I hope everybody passed well the Xmas!

Hello! I'ld have a important question. To witch emission class include the supra '93? it would be necessary to know to my MOT in Hungary! If my car is EUROI how could i modified to EUROII? I've found some website: http://www.hotcarparts.de/section/euro2-vw-audi-seat-renault-ford.html http://www.krause-franell-zubehoer.de/minikat-mini-euro2-toyota-rav4-typxa-kw95-p-6181.html http://www.katspezialist.de/product_info.php?products_id=7810

Megalol

Hi! Do u have any video from the functioning of transmission controller? May be from the supra. Thx

Hi! Also i should be very glad if u find one of them. I've search about since one month. If u can get one do buy two and inform me ASAP. I'll buy either of them from you. Unfortunately, sbody broke my lefts wind deflector when is wanted open my car. So u'll inform me if you know something THX!

Hi guys! I want to buy bonnet gas struts and a wind deflector to the left side. one like this: [ATTACH=CONFIG]138618[/ATTACH] i'ld be very glad if somebody help for me in this. [GRIN][/GRIN] Thx

i begin to digest on my mind...

nooo! That's my girlfriend:)

hy guys! Imagine! Look my pics! Something fucking gipsy smashed my supra yesterday It's unbelievable. I left the car before the house for one paar day, and this happened. they damaged the lock, couldn't open, thus broke the glass in. they wanted to steal the hifi, but failed to take it, thus smashed that. Finally, the paintwork also scratched up with anger. The battery was flat just now and the alarm system didn't work. What do u mean about this? it's unbelievable! I'ld have a question: Could somebody help me? how much cost the side windscreen? THX! that's my "earlier" car: http://kepfeltoltes.hu/view/110804/DSCF6818_www.kepfeltoltes.hu_.jpg that's the robbery: http://kepfeltoltes.hu/view/110804/P1070448_www.kepfeltoltes.hu_.jpg http://kepfeltoltes.hu/view/110804/P1070449_www.kepfeltoltes.hu_.jpg http://kepfeltoltes.hu/view/110804/P1070450_www.kepfeltoltes.hu_.jpg http://kepfeltoltes.hu/view/110804/P1070451_www.kepfeltoltes.hu_.jpg http://kepfeltoltes.hu/view/110804/P1070452_www.kepfeltoltes.hu_.jpg http://kepfeltoltes.hu/view/110804/P1070453_www.kepfeltoltes.hu_.jpg http://kepfeltoltes.hu/view/110804/P1070454_www.kepfeltoltes.hu_.jpg http://kepfeltoltes.hu/view/110804/P1070455_www.kepfeltoltes.hu_.jpg

HI! I'ld like to buy this supra(93' TT Manual) and on this video shows that a little difficult starting. http://videa.hu/videok/jarmuvek/supra02-tdCCYOTD9daDOxf7 To your opinion what'll will be the problem with? nothing complicated? I know only that the exhaust is blowing under the turbo. Something opinion is from the chassis? Is it worth buying? There is here: http://videa.hu/videok/jarmuvek/supra03-mZx6qE167kjg8hVF Thank you for your help!