Silece2k6
-
Posts
212 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Silece2k6
-
Pump. Only 60£ shipped Gesendet von meinem E6653 mit Tapatalk
-
Wastegate still available! 80£ inc Shipping Gesendet von meinem E6653 mit Tapatalk
-
- Sold - Gesendet von meinem E6653 mit Tapatalk
-
Also here I.have my old but good working wastegate with a 0,8bar Spring Good working condition with flange [ATTACH]213998[/ATTACH] 80£ inc postage from Germany Gesendet von meinem E6653 mit Tapatalk
-
Here for sale my Japspeed Turbomanifold. I changed to a other one. Works fine, no bricks or anything else. 100€ Plus Postage from Germany http://cloud.tapatalk.com/s/57b836b9051ba/Screenshot_20160820-125320.png? Gesendet von meinem E6653 mit Tapatalk
-
Well yes.this should be fit. But its too expensive, you can buy them for around 180bucks from ebay.co.uk Gesendet von meinem E6653 mit Tapatalk
-
Anyone ever tryed one of this manifold? I know.the spooling should be a little diffrent (bad) against a twinscroll Manifold, but I hate the cheap ebay cracking things. I dont want go 700hp Plus with my Supra, ao do you think a Cast Manifold will support ~600hp? Gesendet von meinem E6653 mit Tapatalk
-
Here 4 Sale my Greddy Fmic from a Supra TT Intercooler Kit. I changed to a bigger one. The Fmic is 600x30x70mm with 2,5" 63mm Inlet and Outlet. Very good condition no damages.[ATTACH]211979[/ATTACH][ATTACH]211980[/ATTACH] Price: 230€ plus Shipping from Germany Gesendet von meinem E6653 mit Tapatalk
-
Hi. I just about to Change my injectors. So i Took of the big Stock Intake Part of manifold and in Zylinder 1 and 2 is Oil, 3-6 not Question two: My New injectors has 6 alloy Adapters fittings. Do i have to put them in without any o-ring? Gesendet von meinem E6653 mit Tapatalk
-
Whats your afr gauge and Sensor? May you need to calibrate It again?
-
Hi. Buyed them a year ago and was Running Safe 650whp with these Injectors. 11mm High Imp / with Adapter Plugs for 2jzgte Fits Hks Fuel Rail Want 350€ plus Shipping
-
for sale Turbonetics t61 t3 and Cast Manifold
Silece2k6 replied to Silece2k6's topic in Parts for Sale
Yes It is T4 Flange. May some admin can Change the topic? ;-) -
Hi. Anyone using a topfeed fuel rail with the Stock Intake manifold? Ive read about Problems with the high of the rail and the cooling lines from the IAC.
-
for sale Turbonetics t61 t3 and Cast Manifold
Silece2k6 replied to Silece2k6's topic in Parts for Sale
Ill Check this -
for sale Turbonetics t61 t3 and Cast Manifold
Silece2k6 replied to Silece2k6's topic in Parts for Sale
Yeah i Know like i said It has a little shaftplay like all Jb turbo. It has around 15tkm on the clock and runs very well. Now He Upgraded to a borgwarner sx300 like me :-) -
Selling the old turbo and manifold of a friend. It is a turbonetics t61 can make around 550-600hp. He ran this thing with 1.5bar and 550hp Turbo is in good condition. Very very very low shaftplay (like New i think) its a Journal Bearing. Price: 999€ plus Shipping for both [ATTACH]210432[/ATTACH][ATTACH]210433[/ATTACH][ATTACH]210434[/ATTACH]
-
I used a restrictor with 1.6mm bore. No smoke anymore :-)
-
I think its not the drain, because i have dash10 and its very short to the sump
-
I found out that my turbo is burning Oil. Seems like it pushes Oil into the Exhaust. When my Car Stands and idle you can see blue smoke from the Turbo. I ran a dash4 feed without restrictor
-
Are there any other injector that fits the Stock Fuelrail? Or can I Run topfeed injectors with the Stock Intake manifold?
-
Mine are new ones with 12monate warranty
-
We have a Problem with the injector. They are leaking at the top hole on the picture. (picture Shows not the Sards)
-
Got them.
-
Sorry for gte
-
Hi, where can I find these O-Rings between fuel rail and cyl Head? [ATTACH]210250[/ATTACH]
