Silece2k6

Sorry my fault, vag coils and lq9 are direct Fire i guess... and Aem v1 only can wasted spark Gesendet von iPhone mit Tapatalk

He isn‘t sure, since Aem 1 is a Longe Time ago. Je Said the vag coils and lq9 had to run waste and spark like the oem coils because the v1 ecu has only 5 ign Outputs... Gesendet von iPhone mit Tapatalk

So anyone know if Vag coils or lq9 work with Aem v1 Gesendet von iPhone mit Tapatalk

Yes we tried other dwell Time if you mean that. Gesendet von iPhone mit Tapatalk

I have a Hks dli installed. The Problem is missfire above 1.5bar in higher gears 3-6. We tried new coils (oem denso and the red ones) with new plugs bkr8eix (gap 0.5) and bcp7r. All missfired. We tried coils and plugs from a 1xxx hp Supra running 2.2bar without any diffrence. Coilplug connectors are new ones. May I have to check the wirings from igniter to coils? Gesendet von iPhone mit Tapatalk

Is it possible to run vag or ls2 coils with the Aem v1 ecu? Gesendet von iPhone mit Tapatalk

Close please

Yes but I have 3 of the Aem v1 Gesendet von iPhone mit Tapatalk

Only Aem Ecu 450£ shipped I can make a Video while Ecu Is plugged in and Pc connected and Car Running. Gesendet von iPhone mit Tapatalk

Sold

Yeah there Must be a Problem with my Car or wiring. Somehow the ecumaster Emu works Fine, But Aem says NO! Think the aem v1 is very sensitive. I have to Check the wiring an Plug connector Gesendet von iPhone mit Tapatalk

Hello everybody. I have a problem with my car. When the ECU is cold and I start the engine, the AFR runs 9.5, sometimes> 19. By the way, run in part only 5 cylinders. The Rpm goes up and down and makes Missfire when I push the throttle. If I heat up the ecu with a hair dryer before, the car runs wonderfully. Now you would think first that the AEM V1 is broken, but we tested the ecu in two supras (hot and cold) In the original Supra everything goes well, but when I install the ECU again in my car, it dives off again (when Ecu is cold) What I have further noticed is when you connect the laptop and the AemPro Software is running it sometimes freezes for few seconds. That makes no sense

I have left a Fuelrail Adapter from Fuelperformance Fits the Stock fuel Rail Price 25€ Shipped Gesendet von meinem E6653 mit Tapatalk

I have here a Flywheel from my v160. It has 70k km on the clock. Good looking condition. Works fine without noises. Never seen more than bpu. Only Flywheel without Bolts. Price 150€ plus shipping from Germany Gesendet von meinem E6653 mit Tapatalk

- Sold - Gesendet von meinem E6653 mit Tapatalk

I have a Greddy Fmic in mint condition with bolt on mounts. Its only the Fmic with mounts and two Greddy silikon hoses(without hard pipes) It is a 600x290x70 with 63,5mm 2,5" In/Outlet. Really good quality Intercooler. I was running 721hp on 2bar Boost without high intake temp. Price: 150€ inc Shipping from Germany Gesendet von meinem E6653 mit Tapatalk

I have a dual-mass Flywheel from my Stock Jspec TT 6Spd in Mint Condition 150€ plus Shipping from Germany Gesendet von meinem E6653 mit Tapatalk

I have a new 72mm Rev9 Turbo. I bought it for a Project but I sold the Car it was going for. DESCRIPTION: TX-72 turbo charger 81 a/r Compressor inlet ^: 4.00" inch ^ Compressor outlet ^2.50" inch ^ Compressor cover : anti surged 70 series cover ^ Compressor Wheel diameter: ^72 mm / ^102 mm ^ Turbine wheel diameter : 68mm / 79mm^ ^ Exhaust trim: 81 a/r^ ^ Turbine flange type: t4 flange ^ Downpipe flange type : 3.00" v band^ ^ Cooling type: oil cooled only ^ Horsepower rating: 600-700 hp+ Looking for 450€ Shipped from Germany Really good looking turbo. Not these kind of ebay turbos. [ATTACH]218713[/ATTACH][ATTACH]218714[/ATTACH][ATTACH]218715[/ATTACH][ATTACH]218716[/ATTACH] Gesendet von meinem E6653 mit Tapatalk

Here for sale my old s366 Borgwarner. I changed to s362sxe, its better for Trackdays :-) The turbo was running max 1,6bar and only 3000km. No shaftplay or burning oil. Compressor is a littl dirty because I recirculated the crankcase breather to the suction side. 350€ without Turbinehousing 420€ with Turbinehousing Shipping included from Germany. [ATTACH]218707[/ATTACH][ATTACH]218708[/ATTACH][ATTACH]218709[/ATTACH][ATTACH]218710[/ATTACH][ATTACH]218712[/ATTACH] Gesendet von meinem E6653 mit Tapatalk

Im looking for a 3,5bar Aem Map Sensor. Need It for my Aem V1 ECU Gesendet von meinem E6653 mit Tapatalk

Full working geniue Hks turbotimer with JZA80 Adapter for direct fitment. Comes off from my 95' Jspec tt 56£ tracked shipping from Ger [ATTACH]217708[/ATTACH][ATTACH]217709[/ATTACH] Gesendet von meinem E6653 mit Tapatalk

I have a stock Jspec TT Manual Ecu left. Full working condition. Changed to standalone. Comes plus traction Controll ecu Price: 92£ Shipped with tracking [ATTACH]216687[/ATTACH] Gesendet von meinem E6653 mit Tapatalk

Ecumaster Emu Gesendet von meinem E6653 mit Tapatalk

I have a set of Do-Luck Brake Hoses for Sale. New and unused. Fits Supra JZA80 Price: 89£ Shipped from Germany http://www.sumopower.com/product/do-luck-powerline-brake-hose-kit-dl-toy-4-104 http://cloud.tapatalk.com/s/588890c35818a/do-luck-brake-line-set-doluck370z1-1.347.png? Gesendet von meinem E6653 mit Tapatalk

Pump. 72£ Shipped for the Ext Gauge. Gesendet von meinem E6653 mit Tapatalk