TheTurtleshead

Wow! I'd love to see more pics of that. Look amazingly clean and original!

Done

Does the gearbox work properly now?

Lovely looking car but that sticker on the wing is chavtastic!

When Peron met Keron

Latest shiny update, allmost there on the cosmetic front!

That's if your car is finished.....!

Can't believe there's a thread with a supra actually being worked on!

*you're #justsaying!

No such thing, I made my own.

You're doing a good job here Mike, doing it by the book it would seem! Pleased you're changing to a more classy bodykit aswell.

Little bits have happened; -Shiny Turbo -Cam cover baffles drilled and tapped -Fittings ready to weld -cam covers will be polished afterwards

VVTi engines use MAF not MAP. There is no MAP sensor on a VVTi.

Plenum install finished! I was waiting on the last few bits to arrive, including getting the TB back from the machinists. O-ring groove in the back of the TB to remove the need for a gasket, other works to the TB include- -Adapter making for supra TPS -New butterfly shaft was made for the new TPS -Butterfly bearing apertures machined deeper so I could fit seals onto the shaft to stop boost leakage via the bearings. Also had to modify the IC pipe up to the TB, shorten and increase it's angle. New PHR PAS pump adapter fitted, to clear IAT sensor in bottom of TB. Because of this I decided to move the reservoir to under the engine box in the corner of the bay. All back together!

Sounds like you're describing riv-nuts

On a first attempt, on a damp concrete runway, I did 5.2 0-60 with stock TT6 power.

Could one of these screens be configured to show a gauge for example, with the output from a syvecs s6? Maybe the gauge could be selectable via cal switch.

Welcome back, I knew the car as well. :)Did you buy your old car back then?

One stock, one Bosch for syvecs. I left my stock knock sensors in, something for the stock plugs and wires to clip to rather than dangling...

Reasonable amount of work to make an aristo engine fit in a supra. The work isn't the problem, it's more the availability of the parts like the engine loom. How bad is the aristo?

Hinges loose?

Were you using your nitrous at the time?

Cheap! Do you live in southsea? I see this regularly when I pick a friend up for football.