gazzi123

Oil levels checked - oil is clean as a whistle - bearings in gearbox must be then - Does that mean i need new/to recon the gearbox then? Cheers

Cheers mate ill have a look and get in contact with chris. Yea i parked car in an alley whilst driving - with walls either side to bounce sound off. in neutral + clutch not being compressed sound is there and when reving it just more frequent (once i hit 3/4000revs it goes) when clutch compressed the sound totally goes. Cheers mate for your help really appreciate it fingers crossed - just want to make my supra mechanically sound + enjoy it

Bump

cheers - any idea the best way to test/check. all i want is bring supra back to life (as good as new - well best i can get it) want it mechanically sound. Got any reliable contacts/buisness where i can get parts like this for the Supra ? Cheers

cheers how much did it cost for rolled arches? WITH STANDARD ARCHES - WHAT IS THE LARGEST J THAT WOULD FIT? FRONT + BACK? THANKS MATE

1 - It sounds like engine bay the humming noise (no idea if it can be fuel pump what should i check for this)? 2 - Noise deffinatly more on passengerside towards the front (owner before me replaced both rear shocks so unknown if that could be problem) once again what should i check? 3 - its both whilst driving + neutral for example: When at traffic lights in neutral and clutch is up (no gear selected) it will make the ticking noise. When clutch compressed/compressed during gear changes noise goes away......then once gear change complete when clutch is raised all the way up noise will start again. any ideas? or what i should check for? Cheers mate

Hi all, got few questions: 1 - at idle (sitting at lights etc) when revs drop below 1000, the car starts to have a high pitch humming noise any ideas? 2 - very faint/slight knocking noise on straight road surface (slightly uneven) - but when going over speed humps there is nothing (maybe illiminating shock problems)? 3 - when clutch not compressed get a ticking/very faint grinding noise - when clutch compressed (changing gears etc) the noise goes away? Cheers all

price for driver + passenger rubbers around windows (including rubbers around mini window for passengers? (if they are in good condition - Notgrey or weatherd) cheers

yea goes when clutch compressed - is it replaceable or new gearbox? cheers

its a standatd clutch/flywheel on 97NA- once warmed put for 2/3minutes on drive (as alwaysdo) it starts making noise. it stops as soon as compress clutch both in neutral + whilst changing gear. once clutch released or after changing gears (clutch pedal fully released) it starts again. in neutral after warmed up - if you give it slight more revs sound gets louder. Any help be appreciated cheers all

bump

just need some advice: recently bought 97 5speed NA supra. When clutch is compressed on idle + during gear changes clicking/tick stops. Once clutch released in neutral or gear change clicking starts and is getting louder? cheers All

cheers, ive found one when you post up what you want on one of those parts website - recon 5speed manual gearbox £325 + p&p. but ill keep my eye out lol - cheers for info though everything is helping

cheers, im just looking at taking Auto out and putting in 5speed manual. ...i also need to no exactly what i need and then i can start buying...down to even the reverse light wire etc cheers

Hi all, Is there anyone that can source all parts i need for a auto to manual conversion on a Auto NA? Cheers

Hi all, im just wondering what is the largest J (width) alloy possible to fit on a standard supra front+back - with no rubbing etc when turning? Cheers all

any chance you doing it for me then lol? cheers for your help mate

i would love to do it myself but my knowledge is very limited/begginer (wish i had knowledge of most guys on this forum and do mods like this myself be much more satisfying) - but if done it i would prefer a trader/professional to do it as i no its been done 100% correct instead of me umming and rrring about it. what traders could do it and what am i ruffly looking at cash wise for a 5speed manual (even using a 2nd hand/recon gearbox) But if i was going to put a turbo conversion on it to make a NA-T would driveshafts/diff have to be changed then? cheers

Cheers buddy, how much would it cost ruffly for a 5spd conversion? (ive heard need driveshafts/clutch pedal etc) as i just want a manual 5speed (dont really need 6speed as the car would stay either NA or have a single T conversion)

cheers mate, do you know how much ruffly a company would charge?

Hi all, being newbie just wondering. Is there anyway or anyone know what is needed to convert a Auto to a manual? What kind of price will it cost (if its possible) Cheers all

Hi all, this is my first post. im currently in process of purchasing a 95 supra which started life as a NA 5speed - it was modified by adding boostlogic turbo kit/FMIC/HKS exhaust/manifold/upgraded ECU/upgraded clutch if i purchase it i would like to upgrade internals. just need some advice: 1 - upgrading pistons (what size are STD pistons) what size/make would people suggest? 2 - going to upgrade headgasket (what one)? 3 - want to upgrade injectors (which ones)? sorry for the 'newbie' post by i have a passion for these cars and joined supra club to boost my knowledge of performance mods and to ask you guys what would be the best + safest route to take for good performance but not pushing my engine to the edge. Cheers All