keron

hi, yes i should have some in stock used.... ill have to check the condition but id imagine they will have rust.... afraid not sorry will do.... nothing yet though.... afraid not.... i had to scrape one together last week when one failed here.....

Happy new year everyone..... Anyone thinking of selling anything they have? any condition......either pm me or call/message me on 07769975299 Thank you

i have a facelift quicksilver vvti tiptronic in.... very nice and practically stock

Nope

That boot blinds home made.... you can see the oem one inside it

You also will need to take off the front bumper undertray if you have one fitted as there is a mount at the front too.

basically yes.... you cant just get the papers as its been certified as permanently exported. if it hadn't, then you can apply for the papers.

if the cars been permanently exported as above, then the only way to get the papers is to re-register the car in the uk again from the start. you cant apply for the papers just like that once its been exported. to obtain a v5 logbook you'll have to mot the car and fill a v55/5 form etc....only a uk resident can do this. now with the uk leaving the car, if you do this you may have to pay vat/duty as well after the new year.....

could be anything really.... ive found subframe bolts loose, brake pad issues (no retainer clips) or sticky calipers etc .... best to get someone to listen outside the car when you move it or get it on a ramp and have a good look over and check all the nuts/bolts as i always find loose bolts.... but by the sounds of it, it could just be the fact that the pad is stuck to the disc overnight if its very cold?

Hi Guys, has anyone got any wheels going? can be stock turbo 16's or any 17's or 18's staggered fitment..... pm me if you have anything?? thank you

Thanks guys Shipping to South Africa is £16 Royal Mail 1st class airmail Samurai 20v....pm me if you need one... thanks

Thanks Sunny

Hi guys...... So as some of you are probably aware, there is a very common fault with rhd supras where the low pressure end banjo pipe leaks as the exposed steel part corrodes and eventually splits. Toyota charge over £650 for the power steering pipe as they sell it as a whole only when you don't need the lot..... 80% of power steering leaks on the mkiv supra ive found comes from this end part (had to change 2 in the last two weeks alone) and sell loads of them, hence why ive made my own direct replacement kit that covers the area affected area that is the problem.... The kit comes as pictured, inc new banjo bolt, pipe and 2 copper washers... These can be used on all the right hand drive Japanese, uk, spec models... 1993-2002 Price for the kit is £69 delivered (uk mainland) Im currently working on a lot of discontinued parts or crazy expensive parts that are common to fail to keep the cars on the road..... I can ship worldwide....so please let me know your location and i can quote on the shipping..... Any questions please just ask.... Thank you

Could be just stuck if it got wet overnight? Discs to pad? like when you wash the car and later it locks on for a split second when you go to move it?? or a possible issue with the handbrake internals? Had this before...where the shoe retainers had stretched... try and narrow it down to see what area it’s coming from?

From memory the recaros had a high tensile/ strength socket / cap (Allen key head) bolt from rail to seat, 4 on each from memory. you don’t want to put a normal m10 bolt in Incase it snaps....

Can you hear which end of the car the noise is coming from?

Ok so as some of you are probably aware, Toyota discontinued the front seat belts for the Mkiv supra last year or so and its one of the most common faults as it does not retract back due to wear and tear and is a mot / inspection failure. ive been looking into replacements for the last 5-6 mths and have come up with a replacement that ive had fitted for the last couple of mths too and is a very close match once fitted... They all conform to the E / ECE R16 UK/European regulations too. They come with mounting hard wear, however you can re-use the old bolts/washers/spacers in exactly the same way.... Includes a new clasp too which has to be fitted (held to the seat with one 14mm nut)...As for the seatbelt warning light to go out (if yours works) as there is no connector on the new clasp but you just leave it unplugged to cancel it anyway...so nice and easy. these can be used on the right and the left side for all japanese and uk spec models... Price is £89 plus p&p and i can ship worldwide.... Thank you

any supras going? any condition.... thank you....

ok i have new oem pumps on shelf.... just the pump if needed...

What engine do you have? na or tt?

ahh ok .... thanks also can you still leave feedbacks on sales etc? again i cant seem to link anything to leave any now for other members? lastly..... what is the name for the app? i cant seem to find it in the app store.... thank you

i seem to be having issues finding my 'sent items' in the pm area? is there a way to get to them? thank you

i have them in stock... pm me

pm sent.... im currently working on a solution for front replacement seatbelts as all are discontinued since last year... i should have a solution in the next 3-4 weeks tops. i also have 3 new oem units located in japan...im buying two so theres a 3rd avail. not cheap but i want two for my own cars in the future...pm me if interested..