viper

Iv got the diagrams but wanted people's opinion on how they would so it. Currently iv got the top waist gate vac takeoff going to the avcr boost solinoid then the solinoid to the intercooler pipe work just after the turbo. The lower waist gate vac pipe attaches to the top vac pipe after the boost solinoid That's not right is it?

What The idiot trying to build it or the car

Doh, crank angle sensor wasn't connected She loves wahoo, not running quite right think the vac feed to the ecu isn't very good so play around with it today

its the MAP ecu not Map2 In order to fit the map ecu you have to cut the connector to the stock map sensor could the ignitor have blown?

just been out and check all again, and the pump is priming, and there seems to be fuel getting through. iv noticed the rev counter doesn't move at all when turning over, is there any chance i could of blown the ignitor? resulting in no spark

iv noticed 2 possible MAP wiring options: http://mapecu.co.nz/PMR/wp-content/uploads/2013/01/Toyota-Supra-JZA80-2JZ-GTE-JDM-MAP-ECU.pdf and http://mapecu.co.nz/PMR/wp-content/uploads/2013/01/Toyota-Supra-JZA80-2JZ-GTE-US-MAP-ECU.pdf i installed mine bases on the JDM spec one

Hi all, Iv just installed n hks t04r single kit, 550cc uk spec injectors, injector resistor pack, and a MAP ecu. The resistor pack was installed using the instructions advised from here: http://www.internetwork.org.uk/mecha.../Injectors.htm and the map ecu was installed following this: http://mapecu.co.nz/PMR/wp-content/uploads/2013/01/Toyota-Supra-JZA80-2JZ-GTE-JDM-MAP-ECU.pdf Iv gone over and checked all connections to confirm fitment and anything lose but all seems fine. Im suspecting theirs no fuel getting through as the fuel pump does not seem to be priming and there is no smell of fuel when turning over. I just thought is see if anyone on here can confirm the electrical diagrams followed are correct and if there is something else i have missed?

Lets start a list for full weekend and camping. I might be able to arrange further discounts for full weekenders

Finally a date has been set! June 8th/9th Dynodaze Public Track Weekend Now hosting the first Official Supra drag Tournament sponsored by DNA Ltd The tournament will tie in with a public track weekend filled with including Tractor Pulling. Im just waiting for the discounted rates but all info can be found on Shakespeare website: http://www.shakespearecountyraceway.com/index.asp for your information DNA ltd (David Nicol Automotive) is a non profit charity organization helping local charities) Iv copied the list across from the original chat thread so please add and amend as necessary please direct questions directly to me VIA PM in order to keep the thread clear. Mods any chance of making this a sticky please? 1. Viper - HKS T04R, 3600 hi stall 2. Shane BPU. Dependent on confirmed date. 3. Spikedjack 4. mellonman - T67 dbb , stock block, auto 5. guigsy - gt35r. If my move my ass and get some parts fitted, and its not in the bodyshop 6. DaveR - B362 turbo, stock block, 6-speed manual 7. Rich.2211 - N/A, second decat, cat back 3" exhaust, panel filter 8. Mark Newman GT47-88,T6, Nos , race fuel, 6 speed 5'' exhaust . 9. Littler - BPU 10. TT Paul tt bpu, aem fic 11. Justin Bieber 12. Josh 13. Neil - single t45 turbo ,big boot install , big wing 14. Dude with the Busa 15. Letmeshowyou - BPU. Me as driver. 16. Dunk - TDi 17. Nicholas

Finally a date has been set! June 8th/9th Dynodaze Public Track Weekend Now hosting the first Official Supra drag Tournament sponsored by DNA Ltd The tournament will tie in with a public track weekend filled with including Tractor Pulling. I just waiting for the discounted rates but all info can be found on Shakespeare website: http://www.shakespearecountyraceway.com/index.asp for your information DNA ltd (David Nicol Automotive) is a non profit charity organization helping local charities) Iv copied the list across from the original chat thread so please add and amend as necessary please direct questions directly to me VIA PM in order to keep the thread clear. Mods any chance of making this a sticky please? 1. Viper - HKS T04R, 3600 hi stall (event hoast) 2. Shane BPU. Dependent on confirmed date. 3. Spikedjack 4. mellonman - T67 dbb , stock block, auto 5. guigsy - gt35r. If my move my ass and get some parts fitted, and its not in the bodyshop 6. DaveR *Maybe* (dependant on confirmed date) 7. Rich.2211 - N/A, second decat, cat back 3" exhaust, panel filter 8. Mark Newman GT47-88,T6, Nos , race fuel, 6 speed 5'' exhaust . 9. Littler - BPU 10. TT Paul tt bpu, aem fic 11. Justin Bieber 12. Josh 13. Neil - single t45 turbo ,big boot install , big wing 14. Dude with the Busa 15. Letmeshowyou - BPU. Me as driver. 16. Dunk - TDi

Right got the details. i will start a thread in supra meets if the mods could make it a sticky i would be grateful as i need to keep an ongoing arrangement of numbers etc with shake spear. THe weekend of June 8th/9th will be the supra tournament weekend. its the same weekend of the tractor pull weekend so i will be busy but should be a great weekend. all details will be in the meeting thread soon. Im going to try and keep this as a yearly event and i am also in talks regarding a second weekend in august to replace the bulldog bash at shaky as it has been canceled. im trying to get us a VIP space in the paddock and a discount on the gate, even if the weekend is really busy everyone taking part in the tournament will be guaranteed runs.

hi guys, sorry iv gone quite, its still defentatly going to happern, im trying to get us a deal so still in talks with shakey. I hope to have a date set asap.

Thanks Jason, Fancy popping up and giving me a hand for old time sake?

Finaly got the engine back in yesterday with the new turbo fitted and harness moddifed ready for the ecu. Im trying to work out where everything goes again and there are several vacume lines and connectors i need some advice please see pictures attached. Picture 1: Where do the 2 vac lines from the power steering pump banjo connect too? (a friend took this apart so unsure where they came from) Picture 2: The 2 earth leads, the one with the yellow i believe goes to the start motor but the other I'm not sure. Also the metal vac line that runs behind the diagnostic port what connects to this? Picture 3: 2 connectors coming from what i believe the coil packs? i cant obviously see where they connect to? picture 4: Metal pipe port on the cam cover, originally a pipe went from this to the stock TT setup. what do i do with it now? block it? Picture 5: Little black vac pipe between the cam cover and intake chamber: can i just block this off or does it attach to something? Any help and guidance on this issues would be a god send as its just these things i have left that i am unclear of, thanks

I'm using a MAP ecu so I guess I unplug and everything and block everything else off, as ill be using an avcr for boost control

Thanks buddy, I beleive you right. Can anyone else confirm please?

Thanks lot ill crack on with this today

Hi iv upgraded my stock jspec injectors to the 550 uk injectors. I have the resistor pack but don't know how to connect it as there is no connector for it. Can anyone please advise how to wire it in?

That was helpful thanks, I still need help with the electric bits in picture 4

Anybody? I may need advice regarding picture 4 and the electrics

Hi all, im fitting my T04R kit at the moment, i had to remove the box so just pulled the engine out as well to save faffing with tight spaces. Iv removed the stock twins and fitted the manifold and T04R turbo, as it not water cooled i have a number of water lines and pipes im really not sure to do with that are still attached to the block along with lots of other bits and bobs im a little unsure of what to do with. Please could you review the images below and give me some advice, i think i may have chewed off a bit more than i can chew with this project so any help or advice would be realy appreciated. Thanks

This was a very helpful guide, so easy to do. i might even try my headlining next see if that works

legend! thank you

I don't suppose anyone has the wiring installation guide for a red MAP ecu? Iv checked Powerhouse website but they don't seem to have it available anymore as the ECU is now discontinued Thanks

In the intrest of the tornament can we add our vehicle specs next to our names please. so i can gauge what to expect 1. Viper - HKS T04R, 3600 hi stall 2. Shane 3. Spikedjack 4. mellonman 5. guigsy 6. DaveR *Maybe* (dependant on confirmed date) 7. Sukhy 8. Rich.2211 9. Mark Newman 10. Littler 11. TT Paul 12. Justin Bieber 13. Josh 14. Neil 15. Dude with the Busa 16. Letmeshowyou