Black_Supra

Hey mate, i used normal spray paint, but heat resistant! Did it before on my old headlights with normal spray paint and after a while the paint got cracks ... so i tried now a head resistant paint. Thanks Thomas =) Hey mate, of course i will upload a video but it`s still a little bit work Fabian

Thanks Luc! I found this one here, this seems to be nearly equivalent and very cheap http://www.ebay.de/itm/Castrol-Syntrax-Limited-Slip-75W-140-Getriebeol-1x1-Liter-75W140-LS-/271092547258?pt=DE_Autoteile&hash=item3f1e5ffeba

Hey guys, i still need a new Diff Oil for my fitted TRD LSD. Any TRD LSD drivers here who can prefer some oils ? I saw the TRD LSD Oil but i think there are cheaper alternative, especially because i am located in Germany, i would like to buy a Oil here in Europe.... thanks Fabian

You are right mate - - - Updated - - -

It`s not that hard, did this a few times more before Heat it in the kitchen around 10-15 mins on 100°C, then start in the inner corner with a scriver drew or something like that to split them ... when you splitted the inner side the rest is really easy, just pull a little bit. I painted them with normal spray paint... and after all you put them back in the oven and heat them up

Sorry for late reply guys ... some news

Not really, i welded a mount were the filters fit perfectly. WEith a cable tie i fixing them ... i think this is okay. But i thought already about hose clamps.

We came so far today ... amazing! 4" exhaust ready Fuel Lines are ready Turbo Oil Feed check

I hope so mate Started today with the Fuel-System-Lines, nearly finished!

I think about it ... its a Manifold from Paul with 4 mm thickness and i think it`s not really necessary cause the stock kits of Paul doesn`t even come with a bracking but i maybe will do it ... manifold + turbo weight unbelivable 29.2 KGs

I think thats`s not stock Long waited for these ones =) CCW Classics in 18", i am so happy!!!

Near Muenster, North Germany

100 % Custom Build! We are coming closer

If not so i will come over to visit you mate! SUPRA AWESOMENESS! Hey mate, i bought them in a german Shop, around 45 € for one Set! Nice project, i took a look at all 4 pages =)

Some nice and decent Stickers 4" Custom V-Band *-* Boost Logic ! Rear Brakes installed Rear Bumper installed The interior is going back in ... Momo Steering Wheel / Black Carpet / Black Sky ... TRD Cluster nearly finised today ... in LOVE

All sold mate, i go for the Toucan

I will start the next weeks with the wiring! And i am scared mates ... never did such a job before. - I got the whole Single Turbo Engine - I got a Syvecs S6 incl. P&P Supra Harness - I have to buy Sensors like MAP/Lambda/Selenoid/Temps/Pressures for my Syvecs (JTI) - I wanna strip down the stock 6-Speed harness and want to remove all cables/sensors no more needed and integrate the new ones - I wanna relocate the battery in the trunk Of course, did some jobs before like Defi Installs/AVCR/SLD/FCD and other smaller jobs but never something big like that ... some guys of you got experience or helpable threads ? Fabian

Yeah, thanks mate, i already found it but its a little bit expensive + shipping for just such a small one ... but if i will find no solution i will buy it.

You was right mate! I got a mail from Hypertune, Inlet is 1/2 NPT, return 1/4 NPT =) thanks

You even got the big-port ? Mine fuel rail is realy scary, i can put a whole finger in it

Does anybody got a plan of the size for the fuel rail fittings of a hypertune big port one ? I need some adaptors (on the photos the blue ones), ... from ??? to D-06 for my Twin Bosch 044.

Still waiting

Interesting, let me know! Thanks

Thanks mate, where i can find Lee ? Fabian

Searching for a good solution, my power steering pump fits not with the hypertune big port 102MM TB ...