shifted

If you could please, that would be great. The rear hatch LED light is all working? Interested if so. Assuming there's no issues in posting?

G'day fellow Supra owners, hope you're well! Looking for a parts list for the major service for the VVT-i 2JZ-GTE (Series 2) if someone happens to have the part numbers to go with the list? I understand the below is the list itself (please correct if you notice something is off?) JZA80 Supra 100,000km Service Parts - Twin Turbo (2JZGTE) Part Quantity Cambelt 1 Tensioner Bearing 1 Hydraulic Tensioner 1 Water Pump 1 Camshaft Oil Seal 2 Front Crankshaft Oil Seal 1 Rear Main Oil Seal 1 Harmonic Balancer (Crank Pulley) 1 Fuel Filter (Up to Feb 94) 1 Fuel Filter (Mar 94 On) 1 Air Filter 1 Oil Filter 1 Engine Sump Plug Washer 1 Ignition Coil 6 Coil Housing Connector Harness 6 Thermostat 1 Thermostat Gasket 1 Serpentine Drive Belt 1 Shift Control Yoke (6 Speed) 1 Platinum Spark Plug 6 PCV Valve 1 PCV Valve Grommet 1 Am hoping someone has saved a list or has an excel file with all the good stuff. Also, anyone taken off the side skirts and got a photo of all the original clips and where they go and their part numbers? I've tried searching but I can't seem to make it work well for me, and the AUS Supraforums has a lot of broken links... If I've missed it somewhere, apologies. Thanks! Kind regards, Paul

Hi mate, That centre console, is it from a Series 2? What's the side like that aligns with the main dash? Thanks!

I have a brand new one somewhere in the box for when I go to fit it, I'm away for work for a week though. Will get photos in here and some measurements for you when I get home if no one else answers. Do you happen to have the under bonnet piece? Would love to get some measurements of that...

Able to post a link to the dash panels? I don't have facebook but tried to google and it took me to a Singaporean company. $1370 isn't cheap, but second hand prices here are crazy, I'd pay it. I'm glad there's parts seeing Toyota is doing SFA... Wonder what is next on their list. Hood scoops? OEM Dash and centre console? I just bought a new bonnet, insulation, headlights and fenders - $5k AUD not including delivery.

Thanks mate, will have a look into that in case that is the issue in mine! Appreciated.

@adam1983 did you manage to answer your query above? Interested to know. Mine has started to hunt idle so trying to figure out what part it could be that needs replacing.

Well... back again! Searching the forum as well as figured to post this up and see if someone else has had a similar issue! After a spirited drive, returned home and upon reversing up the driveway the car started to hunt for idle, would bounce from 500 to 1,000 and back, stuttered and eventually died. Have tried starting it since, and it consistently can't hold idle, bounces from 0 to 1,000, stutters, dies, it only remains on when the pedal is applied and fine under load ie. taking it up the road it is ok as long as the pedal is applied, dies if not. Not sure what it could be, going to try run codes when I get back home on Thursday. PCV? TPS? Something in the ETSC-i system? Coilpack? Leak somewhere doesn't seem likely, spark plugs have been changed, there is oil in the gullys so the valve cover seals need to be changed (she's at 86,000kms now so going to get the parts for the major service and do it all in one go). Any thoughts/suggestions? Thanks!

Cheers! I haven't seen the clash myself, what I was hoping might be possible is to amend a 3D model to see what adjustment needs to be made and see if a new version could be prototyped. My OCD just likes things complete. I presume there's no issue in running a scoop without the duct.

Awesome, is it possible to get in touch with the guy? Would like to look at ordering. Thank you. Would it be possible ot entice you in some way to share the 3D model for it? I'm looking to fit a hood scoop to my RZ, so it would be useful to then play around with the model itself and see how it needs to be modified over the TRD brace (as I too, have that fitted).

Can't figure out how to multi quote here but anyway.... @Silber Supra 97 does he 3d print the smaller internal plate that's like 15cm by 8cm or so? @Burna from everyone I've spoken to, seems with the TRD bar it has to be cut/bent/modified etc. Either way, would be interested in seeing if someone DOES have the original duct, if they could atleast provide some photographs/overall dimensions or even get it 3d scanned? Could then look into alternative options/adjusting to suit the TRD bar etc?

Would be great to see if possible, thanks!

This is an OEM copy? Glad to see someone making good quality stuff, love seeing Whifbitz around. Just needs rear spats and all set!

Cheers for the link! Sent him a message on instagram. Didn't realise it doesn't fit with the TRD strut brace. I am interested in the missing pieces for the sake of completeness, but seems like most people are missing both metal plates. https://mkiv.com/techarticles/european_hood_scoop_install/index.html 76181-14900 Bulge, Hood 76182-14010 Guide, Hood Air Intake 76183-14010 Protector Hood Bulge, No. 1 76184-14010 Protector Hood Bulge, No. 2 76187-14010 Retainer, Hood Air Intake Guide, No. 1 (2) 76192-14010 Plate, Hood Bulge 93567-14512 Screws (8) 90179-06058 Nuts (4) 76186-14010 Seal, Hood Air Intake When I ordered a new set, years ago from the US, seems my invoice suggests I ordered what is shown in Blue. However, I don't recall ever receiving the plates and recall being told things were discontinued. These parts are somewhere in my house still new, need to find where I put them... I've picked up a second hand hood scoop yesterday, and it just has the bulge, the metal mesh insert and the retaining clips. Going to try find a spare bonnet. I'd be interested in the parts that make the installation of the scoop complete. There's a guy in Aus who does have the plate/duct, and I'm happy to try reach out to people I know from the facade space to see if there's a way to manufacture a replica though I imagine it would be unlikely, there's talks about making one in CF though would be interested in seeing how it fits with the strut brace in place. Unfortunately I have not ever found the missing pieces for sale myself to try and look into making them on my own, but if someone else is already doing it - happy to just buy their product. EDIT: Confirmed, I have the parts in Blue, so I'm missing the protectors and the seal. Hood & Front Fender for Supra JZA80 Part Numbers [IMG]https://toyota-europe.epc-data.com/img_eur/A2/MBX590D.png[/IMG]

Sad loss for sure, RIP Sabine.

Happen to have a link to the Russian chap? Everyone seems to be missing the plate/duct, I'm missing it myself. Thanks!

Hi guys, Given the community is so much larger here than Aus, I thought to see if anyone out there is already producing replica parts of the hood scoop and all its components? I want to acquire the full set-up, and know that the aluminium plate/retainer was first discontinued before a lot of the rest so it's a missing piece for many. Have followed up with people in AUS who do have the plate but they keep ignoring my messages. Anyone out there making these components or looking at doing it? Cheers! Paul

Could we add the hood scoop and all it's components to the list? I sent off a parts list request through the website listing as many elements as possible from around the car and inside it. 9 parts on the website seems so minimal, hope more work out. What Nissan is doing with the GT-R is amazing - how they're making new body panels with robots rather than the dies/presses. Utterly amazing.

Interested, also interested in all the internal upgrades (projectors/lenses/LEDs etc) to the head-lights. The new lenses - plastic? Or glass?

Vinyl dye the carpet black? Did that to my old one - made such a difference. Glad to see you're putting this all back together! S1 manual surrounds still show up on Amayama.

Thread bump, but also interested in a complete set-up. Anyone making replicas of these yet? Especially the metal undertray?

Damn, wish the bonnet was here in AUS.

ToyoDIY requires VIP access, I have some invites left - PM me your email and I can send you one.

Love that the collection is ever growing!

Ages ago there was a list of the Recaro SR3 part numbers around. Still trying to re-locate them, unless anyone has them saved somewhere?