trebor69
-
Posts
1287 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by trebor69
-
Ha ha ha, didn't take any pics, was only my car there ......and I already have pictures of mine
-
Just me then !!! Well it was nice to be out on some good roads .
-
Doubt you will find better than stock but Superpro get my vote .......Paul Whiffin for these .
-
Welcome dude, Gorgeous colour you have there
-
If its still on there should be at least four of us, maybe last opportunity to get some pics of Dunk's car too
-
I buy mine from Opie with my oil .....so far so good .....
-
I would have liked to see your car before it goes over the channel too
-
You are defo using the wrong garages dude .
-
Its the metal neck that has the pin hole yes ? Why not have it brazed, a quick spot on it will seal it permanently and unless you have other issues with the rad like deteroiration or blockages etc then this must be the quickest, cheapest and easiest remedy .....any half decent mechanic with oxy and acetaline should find this childsplay !
-
knocking clunking when going over bumps , pic below
trebor69 replied to tina n paul's topic in mkiv Technical
If you go to the "Home" page and look in Repair Manuals under Maintenance .....you will find these . -
knocking clunking when going over bumps , pic below
trebor69 replied to tina n paul's topic in mkiv Technical
Subframe bolts are torqued to spec too . -
knocking clunking when going over bumps , pic below
trebor69 replied to tina n paul's topic in mkiv Technical
I have same knocking, all bushes have been checked, new drop links and ARB bushes, top mounts are good too, no play anywhere, shocks do not leak and respond well but MUST be the culprit, have heard that the wear does not show as its on the inside of the shock . -
Mine were also well knackered but never knocked, just made the car wander .
-
Pressing them out would be the best bet but you need a socket the exact size so as not to damage the arm (think its between 33 and 34mm), hacksawing them out is another route but remember that you are cutting the steel from Aluminium and you will have to be very careful, I was stuck for time so took them to a friend/garage and let him cut them out .
-
Old ones need pressing or even cutting out ......refitting superpro is easy and by hand.
-
My meaty tires arrived, and are on the wheels at last
trebor69 replied to Callaway Motorsport's topic in Supra Chat
And I thought my 275's looked fat ............... -
Huge grin watching that vid ........thanks man
-
From all accounts this is normal yes .
-
jjs82 can get a pair of new oem arms for £450. I have just probushed mine and I would defo recommend this, handles great now, pro bushes from paul whiffin around £100 ish delivered .
-
Florence & Fred ? Tesco clothing range ?????
-
I will nip over for a looksee but I doubt I will be staying for food ......what with my childcare issues
-
After reading this on Friday I examined mine on Sat and found it to be screwed, rang Keron and collected one Sat afternoon, installed it today...........AAAHHHH I feel so much better now
-
Oh ok, not done mine yet, just wondered
-
They seem to be responsible for quite a number of problems these speed sensors yes ?
-
Yes I know which way it'll go in but I'm just wondering if it is possible to fit it the other way and as such it will not work properly hence the problems people are having on here !!