kwalker705

Bump.... ecu is now removed from the car and ready to post. ECU located in aylesbury/bicester area. So can make It possible to collect if your close by [ATTACH=CONFIG]235860[/ATTACH]

Sounds like a plan.. been too long !

More changes..more mapping... but hopefully have it back in time to enjoy it soon....

1. Josh42 - Staffordshire 2. blythmrk - Derbyshire/Yorkshire 3. erachter - West Sussex 4. Mike2JZ - Zimbabwe 5. Ben_harmer32 - West Sussex 6. Safcdixon - Durham 7. AdamAMG - Mars 8. Tayr - Uranus/Hampshire 9. Lewmc93 - Merseyside / The TSS 10. Mwilkinson - Hampshire 11. m12aak - Leicester 12. Kev.O - Bristol 13. Samurai 20V - South Africa, Durban 14. Trebor69 - Swadlincote 15. Drift_bear - Aberdeen 16. Harrypm82 - Manchester 17. bonus_2000 - Kent 18. Sukhy - Wolverhampton 19. Dnk - Dunk - Redditch 20. Noz - Devon 21. Jim_supra - East Yorkshire 22. Jord - Oxford 23. Style - Newcastle 24. MrGRT - Berkshire 25. kolb - Estonia 26. Swampy - Lincolnshir 27. HamzaHKhan - London 28. WayneW - Belgium 29. sebas - Poland atm 30. Annabella - Lancashire 31. Foxx - Leicestershire 32. Auzzam - London 33.->K1 - France 34. mellonman - SE LondoN 35. Darren - East Sussex 36. Hamilton- Worcestershire 37. absz-Bedfordshire 38. TheRhdsupra - Netherlands, Vierlingsbeek 39. Jongilly - cumbria 40. P_Bazz - Netherlands 41. mc92 - Hertfordshire/Cambridgeshire border 42. Delboy52 - Milton Keynes, Buckinghamshire 43. Suprakeith - Cambridgeshire 44. Jaycee1878 - Liverpool 45. JCBT - Essex 46. Simo2007 - Hertfordshire 47. Supra2jze - Manchester 48. Jamesmark - Yorkshire 49. Boyne/Nigel Boyne - Ireland 50. Frank Bullitt - UK Offshore 51. Chris Bailey - Essex 52. Lee P - West Sussex 53. Steve Spedd - Derbyshire 54. kwalker705 - Aberdeenshire

Looking good Alex.... nice to see you keeping it fresh and changing the look regularly

Afraid the aristo loom is staying with the car as it's still in use.

No different setups.. the harness plug was hardwired into the Aristo loom as no plug and play adapter was available for the aristo. So youd need to source an adapter harness or repin the plug and hardwire it into your supra loom

Sold sold sold

Time to part ways with our dailies due to an ever expanding family and the need for more space £7500 2011 Seat Leon CR+ TDI FR 2.0 TDI 170bhp 6 speed 70000 miles 12 months MOT Tech pack Sat nav Xenon headlights auto wipers auto lights folding electric heated mirrors FR sport seats Flat bottom steering wheel Cruise control Front and rear parking sensors Genuine Seat black grill K&N panel filter Gloss black wrap on front bumper sections Triple R composites front splitter Genuine Seat front and rear molded mud flaps Heko wind deflectors Gloss black mirror caps Eibach sportline springs Brand new front discs and pads Cupra black alloys Gloss black roof wrap Gloss black rear numberplate panel Cupra R rear diffuser Cupra R twin tailpipes Debadged Car recently coated in Gtechniq ceramic and hydrophobic coatings to protect paint and make cleaning easier Private plate isnt included in the sale.

Sorry. Sold now

[ATTACH=CONFIG]231874[/ATTACH]

double post

I use Black nylon braided rubber line with -4AN fittings. Fitted a heat sleeve to the lines close to the turbo/manifold though as the nylon braid doesnt tent to cope so well with heat.

Just checked the coolant flow diagram. It is indeed feed on the water neck and return on the back of the pump......

I tapped into the top water neck for a return , Then on the lower back side of the water pump there is an outlet that i used a feed. I pulled out the barb fittings and drilled and tapped both to NPT threads and fitted adaptors from NPT to -4AN. but if you still have the barbed fittings out of both you should manage to run a hose direct.