Racman
-
Posts
84 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Racman
-
If its the 21.6mm bore one yea I got one on there mines a r154 box so not sure if the part no is different as no number on the one I have got
-
Cheers fella but im skint now will keep trying different things but to be honest they are a load of shit never again will I give the yanks my money proper pissed off been without car for 2 months now just as well I got another motor I will just push it back into the garage and cover it up again
-
A well seems Im waisting my time cheers
-
Bump bump:search:
-
Hi guys well I've still got the same problem sometimes it will go into gear but most times it wont I'm using the smaller bore slave cylinder and a new master cylinder and still got the problem seems OK for a few minutes when engine is cold and to boot was going to be using it tomorrow for my daughters prom but it would be embarrassing so now I'm at a loss don't know what else to do,I have even drilled a new locater for the rod on the release bearing fork and adjusted the rod on the master cylinder as far as it will go without it falling of (IE) its on its last few threads :(
-
sodit going on ebay
-
Bump
-
Hi mate will fit any supra as pcd is 114.3 or any jap motor in respect with or without uk brake's
-
£400 ono as cost me £££ to get refurbed
-
Hi all set of BBS split rim alloys just been refurbed by spit and polish 235 on front and 255 on rears all goodyear tyres loads of tread on all four offers oh and will fit over supra tt brakes with spacers I dont know why the pictures show discolouring on the rims as there is non will take more pict's later if people want ET 42 on 8J rims
-
In car picture
-
Hi all I have for sale these in good condition only slight problem is one of the allen screws got lost as came loose so I replaced with a screw you cant see it when fitted looking for best offer as I know how expensive these are from Aus and also for sale elsewhere best bid secures
-
Bump
-
manual 5 speed gearknob anything considered just done a auto to manual conversion got a fake trd one anyone got anything better pls:)
-
HELP Chris/Dude both of you have come across this issue before I have tried everything I know to get the clutch to release if I start it in gear clutch seems ok but I cannot select gears I would have to say these clutches are shit I've been outside in my garage all bloody day trying everything and still no joy I have measured the slave cylinder bore and its 20.6 mm so I dont know what else to do HELP its really pissed off this problem any ideas please :(
-
cheers Chris
-
Done some more thinking about this got a bit confussed and the only way to sort it is to get it sleeved I need to work out the volume of the bore as to assertain what diameter of sleeve I will need,then theres the problem of finding seals but Im not giving up just yet
-
Hi Chris to pick up on what your saying I have an old slave cylinder and have stripped it down what Im thinking of doing is have something welded to the back of the piston behind the seals which is ally then machined/turned which should change the amount of displacement in the bore which in theory should work,What you think ??
-
Guys I know this is a year old but did ye manage to sort out the problems as I have just fitted a rps clutch to my soarer and am sure Im going to have the same problems cheers if I had of read this thread first I would of stayed well clear
-
Bloody good vid If I had of known you guys drove past my house would of loved to see them in the flesh looked like a brill day well done
-
Hi mate I've got a set of BBS split rim alloys for sale if your intrested they are on the soarerworld.com site under topic :: BBS Split rim 17" ;)
-
Bump diddy bump:)
-
Hi guys anyone best place to get one or has anyone got one for sale pls;)
-
Bump:(
-
Yep new clutch me thinks mate sorry