David P

I have a kph mechanism, a 180kmh face with the k blacked out, a U.K. spec 180mph with 300 kmh face, and a needle too. Take your pick and pm. [ATTACH=CONFIG]122793[/ATTACH]

They change hands for up to £50

Interestingly, the first 'Red' has all the votes.

I prefer without the skirts and spats. Why not sign up, you could then find all the parts that you need, and more opinions than you could want.

It took weeks until the squeakyness was completely gone from mine, just keep topping it up.

By the sound of it, you'll need several to get any further than the local shops.

Before making my; from the cat back exhaust system, I drove to Russia and back with Autobahn88 headers and 3" decat pipe plumbed into a stock exhaust system. It sounded fine.

Yes. Just poke them out with a big old screwdriver, they are not needed, and this will get you half-way to the gains of new headers for free.

Before fitting, poke the guts out of the OE cats, that will let a few more horses out.

Maybe 'OE' is an abbreviation for; Original Egg. Not built, but laid.

That looks to be a 'rumble seat' for the mother-in-law.

Been to see, but I don't fit in them

dibbs, will come & see this pm.

Not seen them available over here, but popular in the U.S. Bought mine from Speedforsale, better prices and better service than MVP.

Yes it began as a Maxxair box, but I have modified it so many times, I might as well have made it from scratch. The whole unit has been trimmed to mount 1" further forwards and 1/4" towards engine. (See bolt hole hole, and trimming at front) The hole for filter has been moved up 1" and across towards the engine 1". (See patch) The over rad induction has been blanked off and replaced with the cold air rammed feed. (See patch) These mods were to accomodate the largest insulated plenum I could fabricate to fit. Lots of pics and info about it in various stages of development in 'my garage' and 'Evolution' album.

SSSSSSSSSSSSSUUUUUUUUUUUUUUUUUUCKHHHHHHHHHHHH I will have a go at embedding video's of the induction and exhaust into 'my garage' when the new forum link anomolies have been sorted.

Yes it does. When next there is a club rolling road event, will come along and do a 'before and after run', for the sceptics.

Make your own! 'How to', in 'my garage' and 'Evolution album'.

Road tax doesn't get spent on roads much anyway, maybe that's a cue for another rant.

Proves that you can't buy "Large" !

I have fitted an Autobahn88 exhaust manifold onto my N/A. The gasket face needed planing by 4mm, and all of the ports and some of the stud holes needed matching. The planing was £20 and the port matching at no cost. Bearing in mind the manifold only cost £60 new, now sorted out it is very good. Pics show all in my garage and 'Evolution' album. N/A's do NOT need a cat to pass MOT, details in link. http://www.mkivsupra.net/vbb/showthread.php?214650-MOT-questions-and-queries-answered... ~~~~~~~~~~~ # Supra "Old Wives Tale" # :tumble:================= :tumble:============ ~~~~~~~~~~~~~~~~~~~~~~~~

I can find lots of changes, but can someone please tell me where the improvement is?

The third clip, was that, King Willy Waver?

550cc, top feed, high impedence, drop in, 'plug and play', remanufactured and flow matched here for £150 http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=120627599462&viewitem=&sspagename=STRK%3AMEWAX%3AIT