scoooby slayer
-
Posts
611 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by scoooby slayer
-
hows traction now jamie ?
-
awesome results jamie what whp and wlbft did it make ? get a graph up fella
-
im trying to soften the rear of my supra abit stuggling to get 760 rwhp on the tarmac below 100 mph ! i cant find the shock adjuster on the rear ? all i can see is what looks like a tyre valve at the base of the shock that just unscrews and comes off and looks exactly like a tyre valve cap ?
-
what dyno you on today mate ? good luck
-
so they tell me its got the same springs that tdi put in so havnt changed since last run, i dare bet inlet cam is set different hence giving me some considerable gains lower down at the expense of top end power, usually the way it works with cam timing. from watching your videos you seem to have more grip i think so its something i need to look at. im gonna get some 17s for pod with taller tyres and see how they fair then mate.
-
what spring rates you running on the rear mate ? if i can find some more grip id be happy to consider trying to find some more horses. i think my car could squat abit more than it does to aid grip, my suspension is hks coilovers.
-
cams are 272 11.5mm, standard size valves ported head. if you look at the old and new graphs it has gained 30 hp earlier low down and lost it up top, over 400 at the hubs by 4500rpm would indicate to me the extra 400c coming into play. there is no doubt more in it but its pointless jamie its hard enough now trying to get traction as it is. can you get his dyno run and we can compare then mate. there was no tuning done at all yesterday just check its safe fuelling and no det, its to rich aswell would make more power if fueling was around 11.4 but at least i have a bigger safety margin.
-
2 bar boost 10.9 - 11 afr, i have gained low end power in sacrifice of abit of top end power so looks like slightly different cam timing. turbo can run 2.2 bar so with that in mind and cam adjustments 800 should be doable at the hubs, cant see me bothering though it is truly savage mate.
-
been on the dyno today, fueling was way lean second fuel pump needed rewiring, ended up with this hub power red and black is last engine run, blue is todays on new head. theres more in it with more boost and cam timing but its pointless its utterly savage as it is.
-
map should be fine as long as cam timing is still the same, im sure i was just getting reversion on my lambda but better safe than sorry. sam is gonna dyno it and fuelling/det check. the car hasnt done 1000 road miles since the map so hopefully all is still good. il have a fresh graph hopefully for wednesday. they said it was a very comprehensive build originally with no expense spared. if it wasnt for you i wouldnt of bought it as your car was the inspiration for me to get one
-
il see what happens jamie may even see you there il see what wednesday brings on the dyno when she hits the limiter in 5th ! fingers crossed eh
-
lol if you drove my supra you would think it was fubared ! and its got a brand new toyota 6 speed and carbonetics tripple, as said above its just clutch and transmission noise, skylines are just the same on multi plates. -
ive got a little clip where i went for a little test, the noise half way in is surge where im half throttleing at to high revs, the t51 certainly makes some noise
-
well ive been down the road in it with boost controller off which is around 1.6 bar and it is truly insane it will break traction everytime in 3rd gear if full throttled. my sniffer is showing leaning off to 13 at top end so im off to tdis dyno on wednesday for a fueling check and hopefully power run at 2 bar. want to get to pod asap i think my sniffer is picking up air from the 5" exhaust but better safe than sorry, tdi are going to try activate the display out for my navigator aswell.
-
im looking for 2 alloy wheels for the back of my supra, it has greedy 330 4 pots on the rear so need a pair of 17" rims to put slicks on for drag racing. i dont care what they look like cosmetically but must be perfectly straight.
-
will they fit over greedy 4 pot 330mms ?
-
did yours hook up ok with these on ?
-
where abouts are you jamie ? wouldnt mind these for pod later this year
-
i have got the fcon navigator but the following readouts are always at 0 ? a/f , knock , ign D , inj % , i realise maybe knock doesnt work if it doesnt have knock amp but why would the others not work ? it has a lambda in the downpipe and surely it must know injector duty and ignition duty ? i cant fathom it out does it need something switching on to make it relay the info maybe ? any advice would be much appreciated as ive just spent nearly £300 and still no means of monitoring yet !
-
941rwhp @ 30psi with Bullseye Power Billet S374 BatMoWheel
scoooby slayer replied to Brazil's topic in Supra Chat
us hp is far from uk hp, still impressive though -
just out in the workshop and pressure tested my boost system, injectors are leaking bad on the plenum side, has anyone got some new base seals i can buy and collect today ? i thought theyd be an o ring which i have thousands of but there a special seal, i am told though that i just need stock base seals to go on the base of the injectors ? can anyone help i will come and collect and pay cash. i have phoned all toyota dealers and tdi plc and no one has any in stock.
-
i forgot to say that it also has a jun plenum and q45 throttle body so 27 mpg is pretty miraculous i guess.
-
il keep an eye out for results from you next week tbh jamie your car is what made me buy a supra, i have been waiting in the wind looking since all those months ago when i pmd you asking if you would sell yours.
-
after what ive read on here when i want/need remap ryan is the one and only to use. does he map on road or rollers ?
-
yes its a spl bb. what did you make at the hubs mate when you made 894 bhp ?
