Delboy52

That would be great if you can find one Lyndon! Thanks

Part numbers for the 2JZ-GTE, A343e transmission \ gearbox, fluid temperature loom connector. 90980–11025 90980–11401

Momo Millenium steering wheel with Works Bell carbon flappy paddles

Tried the breaking threads in the for sale section? This one mentions ABS. http://www.mkivsupra.net/vbb/showthread.php?327137-Breaking-VVTi-TT-Tiptronic-MY2000

Do you have the two metal fluid lines available for the gearbox? Feed and return.

Supra - Fit correct ATF temp clip. - Upgrade tunnel heat shield insulation. - Replace damaged boot(s) to track rod end(s). - Copper-slip onto rear suspension joints. - Back off steering rack nut one click. - Install new alloy rad. - Re-Install air-con. - Repair missing Neutral Start wire. - Fit additional T.T. diff mount. - Replace weeping AT fluid line. - Identify oil leak location from engine. - Fit custom Work wheels. - New tyres all around. - Repair carbon fibre Trial bumper. - Booked today , new colour, glass out full respray. - Blend in rear wide arches. - Straighten jack point seams. - Waxoyl underneath. - Drive it and get used to using paddle shift. Bora(daily) - Drive it. - Service it. Leon (Wife's) - N/A

It's not that bad. Had a garage do it in the end, whilst it was in the air having something else done. Probably got the last bubble out and charged a days work as the trend goes.

2018 Lexus LC 500 - BASE PRICE $90,000 (est) - VEHICLE LAYOUT Front-engine, RWD, 4-pass, 2-door coupe - ENGINE 5.0L/468-hp/391-lb-ft DOHC 32-valve V-8 - TRANSMISSION 10-speed automatic - CURB WEIGHT 4,300 lb (mfr) - WHEELBASE 113.0 in - L x W x H 187.4 x 75.6 x 53.0 in - 0-60 MPH 4.3 sec (est) - EPA CITY/HWY/COMB FUEL ECON 17/26/20 mpg (est) - ENERGY CONSUMPTION, CITY/HWY 198/130 kW-hrs/100 miles (est) - CO2 EMISSIONS, COMB 0.96 lb/mile (est) - ON SALE IN U.S. Spring 2017 http://www.motortrend.com/news/2018-lexus-lc-500-first-look-review/

I imported from America but Parry in this thread has a set for sale

I've attached the front caliper measurements to give a bit of help in finding if they will fit under a wider range of allow wheels. Bear in mind this sheet is based on my modified calipers and measurement 'D' may well be different on a brand new caliper set. A lot of material was taken off the outer shoulders which extend further than the center section where the pistons are. Brembo_SRT8_caliper-details.pdf

Yeah they're great It was a nice warm afternoon when me and David were mapping the gearbox and had no brake fade after our repeated stop/start antics. They cost a lot less than Supra Bremos even after shipping from US but the ass is all the fettling to get them fitted. Especially if staying with 18" wheels like me. The look here is wip:

I have Kenwood DAB in mine with a stick to the window reciever. So far it works very well when the car is sat still in the garage at home. All other times it cuts out whenever it feels like it

Thanks Slam. Would you happen to have a side shot?

Yes they are almost the same apart from that lower lip. Just wondered it the Ridox dropped much lower and would look odd with a stock front. Been speaking with Rich at Driftworks for some time now getting some custom Work wheels made up and your car Ric has been used as wheel reference a lot. Such a great example

Hi mate Thanks for the link. I'd really prefer an original shot if someone has this combo. If it really hasn't been done I could Photoshop it myself but I'd still have doubts if the flow lines work ok. I have a stock front with the active lip and the Toyota sideskirts that look like Ridox without the step. I'm wondering if the Ridox step hangs down too much when paired with an active lip OE front bumper. It's for the coming new look of my Supra.

I've trawled through enough Supra pictures and not been able to find any photos with this combo. Only Ridox front bumpers or an OE bumper with an after market lip. I'm interested to see what the side profile of this Ridox side skirt and OE front with active lip combination looks like. Anyone here has this setup and can upload a photo? Thanks

Only lists Supra mats but you could ask Dane if he can make 300sl ones. He made my Supra V8 mats as part of a group buy some years ago here and they are still really good. http://webshop.callawaymotorsport.com/?product=toyota-supra-mk-iv-jza80-floor-mats

Your photos are still there, just very clunky to navigate the site as it's fully loaded with ads. I run Firefox together with this addon. It works for me and PhotoBucket "runs" again. https://addons.mozilla.org/en-Gb/firefox/addon/noscript/

Yes, without a script blocker it's actually useless now

There is a group here with what looks like a couple of Lexus\Toyota wheels that may have paddles built in. http://www.mkivsupra.net/vbb/group.php?discussionid=144&pp=10&page=1&do=discuss

Volk TE37?

Do you still have both 2x pairs of the metal oil cooler pipes that go to each gearbox?

They are indeed from Metal Monkey, I have the full kit. They did a special screen cutout tachometer face for me.

Not quite so many pounds My OLED hardware came from here: http://www.4dsystems.com.au

Lyndon could give you a more accurate idea than me. I provided the graphics for the features I wanted and helped fit it.