devan

Dont suppose you could measure it for me could you. Im thinking of re-carpetting my car in black.

I have the original dials and they are accurate to 70mph definately (tested via GPS) and im not sure about above 70mph because i couldnt be bothered to test, but at least youll be safe upto the speed limits. So all i did was blank out the "K" so it reads "M/H", i did have white and blue el-glo when i bought the car, but i prefer the original factory look.

Its an easy install as long as your confident, You can really go wrong as long as you get the right wires.

Somebody on Ebay sells a set for £25 iirc.

£150 collected?

Dont suppose you have any more holders do you?

Found out they are Ruff Racing R279.

Bump.

Im after the bulb holders which are circled in red in the image below, excluding the one on the right as i have this one. It doesnt matter if there is a bulb in the holder, i just need the holders. There are 3 all together, and are quite big, i cant find any anywhere, and Toyota dont know which to order without me having to waste money on buying all of the holders on the cluster. Im also after 2 of the bulb holders on the pic below on the right (black base) for my 'seatbelt not on light' and 'door open light' if anybdoy has any please. Went to Toyota again and they couldn't find them on their screen to order. Cheers, Ash.

Connected the grey to the ECu and its now de-limited!! Power steering works and no warning lights so im happy now.

Yeah, well i think i do have a speedo converter and a delimiter in one, because of that wire coming from the unit called "ECU Output". When i get time ill run this down to the ECU Pink wire on PIn 2 and see if it de-limits. If not, ill just disconnect it and live with a 112 MPh car until i can be bothered to buy a seperate delimiter. Cheers for the replies.

Oh your joking! I hate living in this country.

No delimiter connected to the ECU, I just need to know where the ECU Output wire goes from my speedo converter, so i can see if this is the delimiter.

Back to MPH now, and regarding the temp gauge, i had forogtten to tighten up the 3 screws holding it onto the main cluster circuit, so all sorted now. I went to Toyota to get the bulbs and holders but they didnt know which ones to order so i just left it, think ill just solder my own LED's in.

I need the same, but i think this wire to the ECU is to delimit the car aint it? I havent connected it up, and my speedo convertion still worked.

Please?

Ive just had a look at my speedo converter box, and there is a wire which isnt connected to anything. The box says it should go to the "ECU Output" could this be why my car is still limited to 112mph? And where on the ECU should i connect it?

Right i took my old dial faces off an luckily for me i found the originals still stuck underneath!! So im now running in kph (very confusing but i like it). The speedo, revs, and petrol gauge are ok, however the engine temp doesn't work now, bad times. The main point is, my mph dials were lit up via the converter, and the person who swapped them took the bulbs out of the rear of the cluster, so im now driving with no lit up cluster. The bulbs i need are the twist lock ones, but are really big, anybody point me out to some, maybe on ebay, i just dont know what size they are.

Any cheaper than this lol: http://www.suprastore.com/trdtosusprih.html Thats a bit expensive for only one dial isnt it?

Manual, na, 1994 model, the ones i have now go up to 180mph.

Im after some original Toyota kph speedo faces, i think they are black. Maybe if somebody changes their Supra faces they might want to sell me their old ones? Cheers, Ash.

Yeah ive been looking all over the net but cant find any. Ill have to settle for original dials, anybody?

Anybody have any orginal KPH dial faces?

If i wanted to convert my speedo back so it read how it did in Japan, ie, in KPH, would it just be a case of taking out my speedo converter which is installed, and buying some jap spec kph dial faces? I just fancy the KPH Jap look, with some nice black TRD dial faces.

Good idea, as long as they decide to sell the car with the plates. How do you find out which car has the plate you want.