a98pmalcolm

Thanks tomgeer. Yep no probs walker. I used a very course sand paper with a cork block to blend the dent and rub down the gashes. Then used 240 grit dry. Then 320 wet grit. Then 800 wet grit. Then 1200 wet grit. Then 1500 wet grit. Then 1500 with meguires metal polish. Then meguirs metal polish. All with lots of elbow grease.

After a bump in a Curb while parking a friend misjudged a "FOOT" for a few inches so time for 2 1/2 hours working on the wheel Some Pics for you all... Nasty dent and grave http://img138.imageshack.us/img138/1983/6dy3.jpg Superb camera skills there http://img43.imageshack.us/img43/4654/45em.jpg Another shot of the dent and curb marks http://img543.imageshack.us/img543/1580/ai7f.jpg Time to rub the shit of the rim blending the dent into the rim and getting into the groves of damage (excuse the blur my hand was exhausted) http://img823.imageshack.us/img823/8392/kfv4.jpg Getting there.. http://img547.imageshack.us/img547/1235/ks6z.jpg This rim has been Malcafied!! http://img600.imageshack.us/img600/7357/ax24.jpg Malclicious http://img542.imageshack.us/img542/7573/orx0.jpg Thanks for looking Paul

Actually pulls off rather well

Top secret bud. Its a bumper that can be hard to pull off well... Thanks all :-)

cheers fella

looking good fella

Thanks chaps. Im very pleased and it didnt break my bank..

Thought I'd share a few pics with you. It would have been better with before and after pics but I had loads of cracks and breaks all over the car and the work carried out by the workshop that I use is just flawless and and amazing price he helped me out with... 1st up bonnet. Were the catches were it has started to miss shape AGAIN so he did the hold bonnet... http://img854.imageshack.us/img854/8859/uhbu.jpg Next was as a massive crack in the middle of my bumper were I hit a post also stone chips ect were there. http://img17.imageshack.us/img17/333/oy4v.jpg Another crack sorted were the car had hit a bump in the road http://img51.imageshack.us/img51/6759/pd0p.jpg Reflushed the bumper after the whole joined crack from driving through a flood (wont be doing that again) http://imageshack.us/a/img833/3324/kpk7.th.jpg And other side... MMMM SMOOTH http://img839.imageshack.us/img839/6586/zkk7.jpg Massive crack sorted.. I have a before pic for this.. Before http://img22.imageshack.us/img22/2465/5kgu.jpg And after: http://img35.imageshack.us/img35/6935/2q79.jpg Shot from the rear: http://img15.imageshack.us/img15/9600/jbty.jpg And cheeky quick pic: http://img202.imageshack.us/img202/7036/f8n7.jpg Thanks for looking Paul

Turbo big enough? lol

Hmm strange that 550cc injectors on a custom built block? Why no reserve? Most probably stolen..

Yer I like it.. Looks good in white and black..

Cool

Yer mine is the triple mate. If Dave is saying his is that much off stock it must me a massive difference between the double and triple.

Well the triple plate must be 10 times better than the double. I get no noise on stock cylinders and its a soft pedal.. As you can hear in the quiet moments nothing....

Hi Andrew. I was lucky enough to have Lee at SRD contact me at the time as he had one. I doubt he keeps them in stock. Might be worth asked Paul at Whifbitz and Lee at SRD is he has one. If you order from the states you will get a stinker of a customs charge.. There you are bud: http://www.garagewhifbitz.co.uk/index.php/rps-636.html 10% extra press over stock is near on nothing..

Stay away from competition clutches. That my strongest bit of advice. I know you said the price is high but I really really would advise an RPS clutch. Its near on stock feel and no rattles. I use the triple plate but a double plate is fine for 600BHP. I never looked back on my clutch. Yes is was around £2600 but worth every penny. The double are cheaper but when your making the 600BHP mark there is no point at all taking short cuts or you will just slip. I use mine as a daily runner with a 20 minute que in the morning and the clutch feels great. I had serious serious clutch issues last year and I was pulling my hair out costing me £££ (have a look at some of my old posts) Honestly chap RPS....

Not happy I had to work

Hi King. I think there just normal facelifts but d[-_-]b took them apart and went to town on the plastic lens's with wet and dry...

were abouts in east Anglia are you?

Nice ...

Nice job :-)

Nice...

I had a leak. And a sneaky one at that. Right at the back next to the bulk head theres a pipe. Not massively visable Have a look there

yay I have 1/4 of the Votes... lol

Perfect mate. And you have the same Phone holder as me lol.... ebay?