a98pmalcolm

This is just awesome

I feel stock rear facelifts with the clear lens instead of the orange indicator is the best look..

yer i seem to use my Ps4 a lot more than my xbox

problem with the above is the look pants during the day..

Bumpski

Not sure mate...

Any pics of the water pump?

very good price..

Thanks most probs what it is.. lol I changed the rad and some pipes not so long ago

Hi all, little but of a random one. But does anyone else hear there coolant flow through there heater matrix while accelerating? Not all the time but regularly. Paul

bump

Price drop to £50 delivered to clear..

Price drop to £75 delivered to clear it..

terriable to hear mate

Everyone want these becuase u can watch any channel/movie on them with kodi..

I thought the oem battey possative went the the starter and then a cable from starter to altinator? Yer theres fuse to the sub amp and its half way down the line..

Ah ok thanks Scott how would they be adjusted? Via syvecs?

1.7 mate I only ever had it TTC on syvecs never had it on sequential with syvecs bud

The idle control valve should be fine as it was all OK until I relocated the battery. Getting to the idle control valve could prove difficult lol. But if it was the idle control valve it would constantly be an issue its only on start up? If the car as been running, and I come back to in within an hour it just about catches and starts up...

Thanks for the reply fellas. I used the same kit a others Scott so it should be ok. It just takes a little bit of throttle to get it started. As chris requested I just got all the voltage readings. All voltages were the same with ignition on or off. Battery reading 12V Battery reading on turn over 9v Reading using battery negative to junction box 12v Reading using battery negative to junction box on turn over 8v Reading from junction box + and engine bay ground 12v Reading from junction box + and engine bay ground on turn over 8v 14v when engine is one. so a 1 volt drop at the junction box As you can see on the pics I'm using the fuse box possessive as that is wired straight into the junction box underneath

Ok thanks Chris will try today to do this

Here you are Frank I did 1 earths as I have heard 2 could be needed Sub amp lines could be 2AWG not sure.. Thanks

haha edited...

ah ok.. Well i have done a double battery ground (added in 1st post) Does the chassis to eninge need to be a chunky cable? And can it be on the head as i have bolts were the engine hooks were? And what about altinator plus to battery plus? Can it go into the distributer block or does it need to run all the way to the back?

i kinds like that. its like topsecret mixed with do-luck