Jump to content
The mkiv Supra Owners Club

a98pmalcolm

Club Members
  • Posts

    5936
  • Joined

Everything posted by a98pmalcolm

  1. Yer check the hazard switch connection, I also had an issue once where a wire was trapped under the battery causing the issue
  2. Yes mate. Into gear and handbrake on. But got to a point were someone had to press on the brake pedal
  3. Hi Guys I have just fitted a new cambelt and water pump but I am also upgrading to a Fluidamper crank pulley. The OEM crank uses 2 bolts to hold the tool to keep it still but a Fluidamper has three.. How will I hold the pulley tight? Any advice anyone? Thanks OEM Pulley (with 2 holes to bolt the pulley holder): Fluidamper (with 3 holes to bolt a pully holer):
  4. Welcome buddy. Looking forward to seeing pics
  5. New ones transform the front. I bought new ones last year amd dont regret it
  6. I used a 4 pint milk bottle at the top of the res and used masking tape to seal up. On the skinny hose from the pump put that into a large water bottle and blank off where it would go on the res, use a big bolt and a piece of hose, worked for me. Fill the milk bottle up, you should be able to see it though the bonnet gap if your in the car. Start the engine but be ready to turn it off as it will stuck though like a mo fo. Once you see all the fluid from the milk bottle gone turn the engine off. Use the bottle cap from the water bottle to seal it so you do not spill connect the skinny pipe back to the res, top up if needed. Bingo all done, just go for a drive and steer lock to lock. Just dexron iii from euro car parts, its cheap and thats all you need
  7. I have ford ones on mine. Tbh i think they look better
  8. FOR SALE. I have my Xbox one for sale. Its the 500GB model in mint condition and very well looked after. I also have available a new SEALED copy of Destiny 2 available. Other Games I have here are: Forza 6 Forza Horizon 2 Forza Horizan 3 - Sold £179 as a bundle or I can sell games and console individually
  9. I started on a Tom Delonge Strat, but the cheaper Squire one. 16 years later I still have that guitar lol So a good Fender Squire could be a good option
  10. Thanks for the reply fellas After lots of googling and making sure of part numbers my local Toyota guy can get them, and lucky enough it was the numbers above
  11. Sounding great greg, will they be pushing the power any further?
  12. Hey guys, Both my upper water neck (the elbow) coolant temp sensor plugs have crumbled up. One is a single pin and the other is a double pin connection. Does anyone know where to get them? The sensors are fine just the plugs I need. I assume it needs to be after market ones as my local Toyota only see them as part of the loom. Thanks
  13. Good luck with your new role Simon, you have done amazing work over the years
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.